Satellite Pro L40 PLS4BE: Can I use more than 2 GB of memory

Is it possible add more than 2 GB of memory?

What happens if I add e.g. 2 x 2 GB?

Intel says GM965 supports 4 GB max memory...

BR,

Mikko

Hello

No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).

> What happens if I add e.g. 2 x 2 GB?
I think that nothing will happen ;)
Either your laptop will not start or will start the laptop but the full RAM will not be recognized

Tags: Toshiba

Similar Questions

  • Can I put my Compaq Presario SR5030NX to win 8 and can it use more than 2 GB of memory so?

    Hello

    I have Windows 7 on it now and it works fine, but the specs say that it can take only 2 GB of memory. I didn't know if the Compaq Presario SR5030NX is capable of running Windows 8 and if that would allow him to use more memory, or if the memory is a hardware limitation.

    Thank you

    Tania

    The following link will offer you if HP has tested your system for Windows 8:
    http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

    If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

    The following hyperlink will suggest if your system is compatible with Windows 8:
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

    If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
    1. in the run box, type devmgmt.msc.
    2 unknown devices would be listed as such and plotted with a yellow question mark.
    3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
    4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
    5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
    6. Please provide this number so we can offer you the appropriate driver.

    According to the specifications of your system, the motherboard can support only 2 GB of maximum memory:

    http://support.HP.com/us-en/document/c00910113

  • How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

    How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
     
    It's only 8.3% of disk space!

    http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

    The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

    Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

    http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

    Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

    We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

    We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

    Kevin.


  • can I use more than 2 devices for 1 account of creative cloud?

    Hello.

    can I use more than 2 devices for 1 account creative cloud?

    I know that it is limited to 2 devices for activation / account.

    Thank you

    You can, but you must disconnect from Adobe Creative Cloud app of any one of the 2 previous computers, so that you can activate on other computers.

    Connect and disconnect activate Cloud Creative applications

  • Can I use more than one flash drive to ready boost on Satellite L650/0ed

    Hello

    I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

    In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

    Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

    Thank you
    -Brent907

    Hi mate

    Please check this Microsoft page that describes the ReadyBosst
    http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

    There, you can find this statement:
    + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

    I hope this can be useful!

  • Codes of the lesson can be used more than once?

    My students purchase the book for class and use the codes of the lesson in the back of the book. These codes may be used more than once? Sometimes my students buy used texts. Thank you!

    Yes, I use classroom in a book for Photoshop and InDesign. Thank you!

  • Satellite Pro M70-137: can I use Memory Stick Pro Duo?

    I think to buy a new digital camera from Sony, witch uses Memory Stick Duo Pro. I'm not used to Sony memory cards, so I don't know if my Satellite Pro M70-137 of the 5-in-1 built in card reader can be used with Memory Stick Duo Pro. On Toshibas Web site, it says Memory Stick, Memory Stick Pro, but nothing on Memory Stick Duo Pro.

    Can we read/write Memory Stick Pro Duo with the build in the 5-in-1 card reader?

    Hello

    I found the info you can use Memory Stick Pro 256 MB to 1 GB on your device. I put t really know if you can use a Memory Stick Pro Duo. Check it please in the user manuals.

    If this is not the case, there are solution called Memory stick duo adapter. The example that you can find on http://www.pc-memory-upgrade.co.uk/memory/memory-stick-duo.asp

    Good bye

  • Satellite Pro P300-26U - can I use a second HDD?

    Satellite P300 obligations food raid0 and double HARD drive. All models? Manual of 26U don't say a word on the subject. Model as P300-1BP has double HARD drive.
    Can someone help me? I want to buy a P300-26U in Italy.

    Thank you.
    Guido

    Hi mate,

    Who said that the Satellite Pro P300 takes supported RAID? AFAIK P300 series don't have RAID controller and in the specifications detailed on the Web from Toshiba site I can't find anything about this

    Satellite P300 it of only possible to use a second HDD if it has a second HARD drive connector. You can check it if you remove the second HARD drive. If you can see a second HARD drive connector, you can use a second HDD.

  • Re: Satellite Pro A300-1EA: can I use faster and bigger HARD drive?

    So this may seem like a stupid question, but if I intend to spend of the installed 160 GB 5400 RPM HDD of the Satellite Pro A300 1EA to a 7200 RPM drive HARD (do not know the ability yet) and I was wondering how to make recovery disks (downgrade from Vista professional and XP Professional) coming with the work of the laptop with the HARD disk that does not part of factory as drives for my understanding restore the system...

    The size of the drive HARD replacement has something to do with the thing?
    If the replacement HARD drive is also 160 GB system see the difference? And even if it was smaller or larger the system see the difference?

    I have not even bought the laptop but will soon and it is a little urgent.

    Computer thanks Fellows ahead! :)

    * Oh... It seems that this question has already been answered... a little research has ever killed forum person huh... but if someone has vital information about the issue... Please let me know! :)*

    Post edited by: Carpathia

    Hello

    I think that he should t be a problem with an upgrade to a faster and bigger HARD drive.
    But before you switch the HARD disk, you must create the Toshiba Recovery DVD using the Toshiba Recovery Disk Creator.
    After the recovery disk has been created, you can move the hard drives.

    Best regards

  • Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

    HII!

    IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

    The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
    They will return the laptop for windows xp or from my laptop has another operating system they will not work?

    Also...
    What's the deal with BIOS? : S
    I don't understand!
    If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
    As I download the new drivers before upgrading Yes?

    Thank you!

    The restore CD will of course work.
    The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

    > What's the deal with BIOS? I put t understand!
    > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
    To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

    Some series Satellite A200 needs a BIOS update if you want to use the XP.
    In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

    Best regards

  • Can I use more than 1 on 1 device icloud account?

    I'm trying to set up a family sharing. I have an itunes account id and Setup on my vista desktop. My children are new 6th generation ipod touch for Christmas. I want to implement the family sharing so that they may have music already on the itunes on the computer account and have their own accounts. It says I have to install icloud on a supported device, I did not. can I use one to touch children in order to create an account with my current id icloud and then sign out and they use their ID as usual?

    Not at the same time.

  • Can I use more than one html5/js animation produced with Flash/createjs in a Web site?

    Hi, I produce animations with Flash which will be delivered in createjs html5/js hollow. The problem is that after including the first animation in my html Web site, the rest of the animations are crushed with the first, that is why, if I attempt to insert a second animation in my site, in fact, it will replace the first animation, I had already placed...

    I already tried the following:

    -change the default canvasID to another

    -Change the resources and namespaces Javascript in Createjs export settings

    -manually change the name of the functions (lib, img, syc) in the Javacript file

    None of them seem to solve the problem. So I'm now wondering if it is actually possible to insert more than one animation in a Web site...

    I would appreciate a quick response because I am working on a project with a very tight schedule and really need to address this question right.

    Thank you very much in advance for the help.

    Then, you have made a mistake.

    Start with the two different FLAS.  one with a red rectangle on the stage and the other with a blue onstage rectangle and nothing else.  publish your html and js files.

    combine the two into one and, if you have a problem, the postcode of your a single html file and two js files.

  • G70-120ea: G70-120ea upgraded to 64-bit Can I put more than 4 GB of memory

    I have a laptop, G70-129EA and wanted to put more memory in it. I know the specs says orginal max memory it can use 4 GB but is it because its running 32-bit windows?

    If I switch to 64-bit can put more memory in it? Say 8 GB or 16 GB?

    (I know it has dual memory slots so can put 2 x 4 GB etc)

    It is an older machine using an older type of DDR2 memory. City of repair:

    Supports up to 4 GB of memory system

    Support PC2-6400, 800 MHz and DDR2 PC2-5300 667 MHz, DDR2

    4 concerts is a hardware limitation, not caused by 32-bit Windows. Some other similar portable HP at this time will run 8 GB of DDR2 using the same combination of processor / chipset. When the laptop has been done 4 gig of DDR2 memory modules were quite rare, so the manual just may not consider this possibility. However, 4 gig of DDR2 memory modules, although available, are very expensive. A kit of 8 GB (2 x 4 GB) of any brand with a good reputation will cost more than $100. 16 GB of DDR2 is not possible as there are no 8 GB chips. It is not worth to this laptop to go beyond 4 GB in my opinion. Run with 4 GB of memory on 64-bit Windows and pass that same $100 or even less on a SSD 240 GB and you'll get the speed you are missing him.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • using more than 800 000 K memory of svchost.exe

    Frankly, it seems that many questions post here have recently answered.  However, I thought I'd ask.

    My 64 bit computer, Vista SP2 system, has begun recently in does not not having been in Hibernation.  Of course, it opens and seems to work, but things are very very very slow, or even lock up.  Then... I opened by the Windows Task Manager and find a Schost.exe taking up huge amounts of memory.

    I have Malewarebytes and Kaspersky... or find any maleware or viruses.  So, what could be the problem?  What could be the solution?

    Near: right now I am unable to use my computer in this State.  Physical memory is more than 71%, even with low use of less than 5% CPU.

    Thank you

    Hello

    It offers good information about why it is running:

    http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-svchostexe-and-why-is-it-running/

    See you soon.

  • Satellite Pro A100-830 - can only use 3 GB of RAM under Windows 7 64-bit

    Hello

    I just upgraded my laptop Windows 7 Ultimate x 64 and also improved my ram to 4GB (2x2GB)

    Windows is to see all 4 GB but says only 3 GB is usable, because it is a 64-bit version of Windows wouldn't be able to use all the 4 GB?

    Any help appreciated

    Thank you

    Laptop specs

    Intel Core2Duo T7200 2.0 GHz
    RAM DDR2 677 MHz 4 GB
    ATI Radeon Mobility X 1600
    120 GB HD

    Hello

    Have you already checked the BIOS? How much RAM show the BIOS?
    And what kind of modules you have exactly?

    Normally, it should be possible to use full 4 GB of RAM on a 64 bit OS as your laptop also supports 4 GB.

    Maybe you should also try updating the chipset driver. You can find it on the Toshiba site.

Maybe you are looking for

  • Toshiba 46YL863G - emits MPEG2 and H264 streams

    Hello everyone, I am using Toshiba REGZA 46ty9175ch (46YL863G) and problems streaming MPEG2 and H264 of any popular network in this REGZA DLNA server. (1) is someone for example, work the PLEX for REGZA profile? (2) does anyone have working ffmpeg pa

  • How to install Hotkeys on Satellite A10 521

    Hello I had the problem earlier by installing common modules. The installation program does not start but if look at the registry, I have a key named common Modules:MEU computador\HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA I tried to install shortcuts for h

  • How to add music to my library when icloud music is on

    Hello I could do something stupid, but I hope someone can explain this to me. Before the launch of Apple's music, I have my music the value Sync my iPhone to my music library via a playlist. When Apple launched music, I wanted to listen to some of th

  • dynamic VI in exe

    Hello I try to call a dynamic VI in an exe file.  I put the dynamic VI in the "still included" in the source in the application builder files.  When I build my exe my application can't find the dynamic vi. What is the path to a dynamic vi which is in

  • Get ink system failure-code-Oxc18a0201 error message when you try to print from C7180 printer

    Original title: C7180 printer all in one I'm unable to print I receive ink system failure-code-Oxc18a0201. HELP IF YOU CAN THANK YOU FOR YOUR TIME.