Satellite Pro L40 wireless channel selection

I have a Realtek 8187 b WLAN in my Satellite Pro L40.

I have the latest drivers installed with xp pro, but can't set the channel everything but 10. How can I change the channel when I get the message that the channel range must be 10-10. This just doesn't seem right.
Channel top 10 isn't a problem, but when I'm somewhere else, it is impossible to establish a connection, at least that channel 10 is used.

Hello

Have you checked the settings in the WLan card properties?
Go to the devices-> ECS-> Wlan card Properties Manager.
The Advanced tab should contains different settings.

Wlan channel can also be changed using the Wlan configuration utility Intel ProSet or Atheros Client utility such as tools.

Tags: Toshiba

Similar Questions

  • Satellite Pro L40 Wireless does not and wont stop correctly

    Hello
    just got a Satellite Pro L40-15 1 week ago and it's been downhill.

    The Wireless does not work (and yes the switch is activated and drivers installed). Sometimes windows recognizes no device when I boot.

    And when I stopped he said blocking down, but crashes just on this screen.

    Now, I'm an advanced user, so I've tried many things. Can anyone help?

    Thank you

    As a first step, I would recommend to use the Toshiba Recovery CD and renew the operating system.
    Then update the Vista of the State. I mean to install patches and fixes Vista all published.

    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

    Here you can see that a missing patches can have a bad influence on the wireless network card and the entire operating system!

    Good luck

  • Satellite Pro L40: Wireless is turned on but doesn't connect - SOLUTION

    My light on my Satellite Pro L40 orange wireless was on, but it would not connect after Vista crashed.

    By chance, I found a software switch to activate wi - fi on and outside.

    Try this
    right click on desktop
    go to properties Office (Customize)

    on the left hand side - click - Connect to the projector or other external display

    wireless control is on

    hope that help people, mine fixed TI

    Baz

    Great info. I'm sure this will help other users here in the forum

  • Satellite Pro L40 - wireless adapter does not work - Vista

    I recently had some problems with my laptop.
    A couple of weeks, I put in a disc of OpenSuse.
    It's not stable anything, but locked me out of my original Vista operating system.

    I reinstallled Vista Home Basic, but there are a few problems.
    Mainly, my wireless adapter does not work.

    When I flip the button to turn it on nothing happens and it is not recognized in Windows.
    I installed Atheros Driver, but still nothing happens, light is not yet.

    Any advice?

    Hello

    First check the device-> network adapters area manager
    You see the WLan card? Or the unknown device appears?

    If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

    Remember that your wireless network card? Maybe it was a Realtek WLan card?

    If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

  • Satellite Pro L40 - failure wireless, how to diagnose a problem?

    Not now my Satellite Pro L40 will detect wireless networks, and the light does not illuminate when the switch is triggered.

    How can I know what is the problem?
    see you soon
    Mark

    I'm afraid that the WLAN adapter is not correctly enabled.
    Please put the WLAN to position on and after making this combination of keys using FNF8 and enable the wireless network adapter.

    Card WLAN registered and installed properly in Device Manager?

  • Wireless connection on Satellite Pro L40

    I have a Satellite Pro L40 and I am facing a problem with the Wi - Fi connection. When I turn the laptop on no wireless connection is located. To connect, I have to turn off and restart and free Wi - Fi is computer laptop connects to the Internet.

    I have checked the settings etc. and can't find anything wrong. LAN switch is on.

    An offer of help.
    Thank you.

    GOM

    Hello Gom

    If you visit this section you can see numerous threads on WLAN L40 laptop. Check it please. There may be some useful information for you.
    For example check this one.

  • Satellite Pro L40 - drivers need to

    Hey.

    I just installed a clean version of Windows (Vista 64-bit) on my Toshiba Satellite Pro L40 PSL4BE... But I have no drivers CD or anything.
    I can't connect to internet because my Wifi does not work, because non drivers (and for some reason that I can't connect through the LAN (does not work on other portable computers as well).) And the lack of internet, it is really difficult to find drivers.

    I downloaded the drivers from this site: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

    And I tried to download the LAN drivers wireless from here: http://aps2.toshiba-tro.de/wlan/?page=downloads
    But I'm not sure which one to choose? Also, should I install the Intel drivers first? I installed them, but while restarting the computer froze and I had to force him to stop... :(

    Are there not as a driver Package, you can download, as, instead of the driver CD or something?

    I hope you can help

    ANDA H.

    Hello

    To be honest I don t understand your problem. I checked the Web from Toshiba site and there are some drivers listed and also for LAN and WLAN card. Just search for your model and Vista 64-bit. You will find a short list of necessary drivers.
    Check this box!

    In addition, you can turn on/off WLAN if you press FN + F8. Did you do that?

  • Satellite Pro L40 - how to enable the WLan using ConfigFree

    Can you help me?

    My English is bad I do not end.

    The question is:
    My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

    Help please!
    I want to know what's wrong

    Thank you!!

    Hello!

    Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
    Her check first because otherwise, you can get the WLAN to work.

    In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
    Check it!

    After this Free Config should find your WLAN router if you are in the range of that.

    Good bye

  • Satellite Pro L40 - freezing recovery utility

    Hello

    I'm trying to restore my Satellite pro L40 via the recovery CD. The utility starts and then as soon as I select a language the recovery utility screen freezes with the list of countries endangered and section of flag having a small gray box that just overlap it.

    Does anyone have ideas, what is? I've never been able to get this new laptop to work, it is not the first time I turned it on and then I ordered a recovery CD and recovery utility is now a failure as well.

    This question is unclear to me. I got several notebooks A200 and P200, but I have never seen anything like it. If you aren't really able to use recovery DVD I recommend you contact the service provider authorized in your country. They can order for you the new copy.

    You may have some Microsoft CD/DVD installations to see if the installation of the OS can be finished without any problems. I really hope that this problem occurs due to recovery media.

  • Satellite Pro L40 - network LAN adapter does not connect

    We had a satellite pro L40 for about a year and have connected to the internet through our wireless home network using the connection Wireless on the laptop.

    My son has now gone to the University and tries to connect to a wired connection via the network adapter, but without success. He tried 3 different cables and different takes the work of others within its rooms, so we know the cables and connections to work.

    Setting up the program guard in him asking to connect the cable, which he did. Adapter network said he works in the control panel and new network connection section, it says to connect the cable.

    Any ideas would be welcome!

    Steve

    What is the "Installer"?

    Try to disable the firewall and update the LAN drivers on the Toshiba site.

  • Satellite Pro L40-15 has: motherboard problem

    Hi all

    I have a satellite pro L40-15 and it was running vista basic but very slowly.

    A friend advised me that I needed to renew the bios for xp install xp. I did, and now he's dead. The fan is not still running, even if the wireless lights and 3 lights above the power switch will Flash once.

    I took the motherboard out (part number 08g2002ta22jtb). During the inspection, there seems to be a reset button on the plateau (near the battery terminals). It is only accessible with the removed card. Does anyone know haw to restore bios factory settings please?

    Thanks in advance.

    John.

    Hi mate,

    It's cool to you finally disassemble your machine. But you won´t get no benefit from this action given that the bios needs to be reflashed by a technician of toshiba, BECAUSE they have the right tools to do this.

    I don't know how or what tools they use, but I had a similar problem on my Satellite A100 and they fixed without the motherboard. (So it was told to me).

    If I were you, I would send the machine to another and the closest to the ASP (certified partner) in your country. They should bring back your machine to life.

    Here´s a [LINK | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] to a telecommunications service provider ASP if you need help...

    Cheerio

  • Satellite Pro L40 - how to make a dual boot with two recovery disks

    A small question;
    How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

    discs 1 & 2 are windows vista buisness
    discs 3 & 4 are windows xp profesional
    Disc 5 is updated the bios

    The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
    I have
    I already have a partition, but when I boot from disks, is not has the option to select a partition

    Thanks already

    > Satellite Pro L40 - how to make a dual boot with two recovery disks?
    Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
    Ask this smart guy, how to do this. Maybe it's a useful tip.

  • Installation of Windows XP on Satellite Pro L40

    Hello

    I would like to install windows XP on my Satellite pro L40.

    The installation instructions, I download and create a driver AHCI FDD.

    Installation instructions present in the selection of the type of driver that I need to select PACKAGE DRIVER but I can't find this selection as if I fallow the instructions for installation.

    Can some one Board to create AHCI FDD.

    Download the Storage Manager and check the AHCI HDD... folder. You will find everything you need.

  • Satellite Pro L40 PSL43E wlan driver for Windows XP

    I need a driver for Windows XP wireless lan
    Satellite Pro L40 PSL43E
    I can't found.

    or what should I do my WiFi to work with Windows XP?

    Ty

    ACO

    I think that the laptop supports Atheros 11 b/g wireless network card, so you will need to install the Atheros Wlan driver.

    See this Toshiba WLan Portal:
    http://APS.toshiba-tro.de/WLAN/

    Best regards

  • Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

    History:

    I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

    IV ' e read on the internet that I need Intel storage driver manager...

    IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

    I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

    The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

    How can I make it work? It is that I can get.

    I DON'T WANT BACK TO VISTA - HELP!

    This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

    However, worry guy. I have a solution ;) (jeaaa: D)

    Try to create a new XP CD using the software called nLite!
    Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

    For details and how to use the nLite please Google because there are a lot of useful Web sites.

    Good bye

Maybe you are looking for

  • Satellite L775 goes into BSOD after upgrade to 8.1 Win

    Hello First of all, I have win7 on this device, so I bought a Microsoft windows 8 pro for her.When I upgraded, it went well for a few months and then it started to plant on its own. I tried so much to rebuild the PC using the Toshiba software without

  • Is it possible to restore a session on demand?

    There is an option that sounds right, "history > restore previous Session ', but it is disabled no matter what. The only solution is to install an addon of session manager?Thank you!

  • sound via DVI - D to HDMI

    I recently acquired a renovated Pavilion P7-1010 running Windows 7. It has no HDMI output, but it has a DVI - D output. I would like to hear the sound through the speakers integrated HDTV (I don't have speakers or an external audio system). I tried t

  • Remove the automatic update of machine

    I am runing XP Professional SP 3.  My pc has been updated overnight, without my knowledge and it gave a message to reboot.  I did, and a major program does not work.  I need to know how to uninstall everything that was installed.  Any help will be ap

  • "This plug-in following broke down: Shockwave Flash. Can you get it someone please let me know what to do?

    Since my computer was rebooting I can not play any video online, a message still appears: "This plug-in following broke down: Shockwave Flash. Can you get it someone please let me know what to do? I already try to downland Shockwave players, but ther