Satellite Pro L50 - B Touchpad resize the display

Similar Questions

• Satellite Pro L850 - Driver/tool for the display of the functions of the F keys

  Hello

  I have a L850 Pro of the Satellite with "nine" Windows 7 Home Premium. I had to reinstall windows and I do not have the recovery DVD, so I used a Windows DVD installation and installed the drivers manually.

  The only thing I miss now is the display of the F1 to F12 key functions (like brighter, stronger, touchpad switch, Wifi/Bluetooth power and so on).

  Can you tell me, what driver Toshiba or tool do I need?

  Thank you very much.

  Andy

  Hi Andy

  What you need is the package of added value. This package contains several tools and utilities. One of them is utility of Flash cards. This tool is for Flash cards that you see at the top of the screen when you press the FN key.

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Satellite Pro 400CDT not start after the display of a stack

  I have the same problem as this post:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16837

  Is there a solution yet?

  It is with a very old laptop 400CDT Satellite that I use to pay my car. What happened, I lay laptop running on battery until it went flat and now I can't start laptop with or without battery (and connected a/c)... turns on, it don't think light for 1 second, but nothing on the screen?

  What this may be?

  No one can tell you with certainty what can be the problem. We can only speculate, but just after the exact diagnosis laptop you can find more information. As you can see in another thread, there is no universal solution, and I assume that you need professional help.

  BTW: one thing I didn t understand. When you turn on your laptop, don't stay laptop but nothing showed on the screen or the computer laptop immediately switches off the POWER?

• Satellite Pro L50 - A disconnects from the WiFi every 20 minutes approximately

  I searched around on the internet for advice.

  I downloaded the latest drivers from toshibas website, I put my power maximum output on Device Manager, and it is not my ISP, as happens at any hotspot wi - fi including familys homes, work, etc..

  Please, how I stop my laptop to disconnect every half hour, it disrupts the Skype teleconferencing and downloads.

  I am running windows 7 64 bit and it's your laptop brand new I bought a month ago has soon

  > I put my power to the maximum on Device Manager.

  I guess you mean the Win 7 Power Management.
  Here a nice HowTo on + Win 7 power management +.
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Here you must concentrate on Wireless Adapter Power Saving Mode settings
  There are four energy saving / performance parameters. If your Wi - Fi connection is unstable or slow, try selecting a higher performance tuning.

  This must be done for power profile that you use mode battery and sector.
  I would also recommend to check different settings of the Wlan router.

  Check if your laptop disconnect Wlan which has no security (open) and various parameters of WiFi (WPA/WPA2 AES or TKIP) encryption

  I also recommend you update the WLan driver (if possible)

• Satellite Pro A100 (PSAA3) - Cannot install the display driver because of the length of the specified directory path

  Downloaded, extracted and I tried to install it, (installed before but had to reboot the computer)

  Error message
  "SETUP cannot continue because the length of the greater of the specified directory, the name of the installation folder path exceeds 88 characters.

  "Please shorten one or both of the limit specified below, and then try again"

  What should I do?

  and cheers in advance!

  The problem is that your unzipped folder name is too long!
  You need to rename the folder. Take a shorter name!

• USB 3.0 does not work on my Satellite Pro L50

  Hello boffins.

  I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

  I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

  The technician in the repair shop said:

  + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

  It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

  So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

  Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

  But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

• Satellite Pro L50 - load capacity of low battery

  Satellite Pro L50, I got a warning box will appear from the Toshiba PC Health Monitor, who said

  "Your battery charge ability is relatively poor.
  After a period of time, the battery will lose its ability to perform in the max capacity & will need to be replaced. This is normal for the batteries. Click the help button for more information on the State of charge 'poor'. »

  By clicking on the help button, said the State of the battery to a third load capacity.

  Is this an indication that I need a new battery?
  The laptop is only 4 months old & I have a few concerns. Comments appreciated

  Best regards, mrpringle.

  If the laptop is 4 months old I recommend you to contact your dealer or directly the closest Toshiba sevice provider and explain the situation.

  You should clarify this with them and maybe you will get new battery free.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
  Don't wait. Call the Toshiba service as soon as possible.

• Satellite Pro L50 - B - unable to connect at 5 GHz Wi - Fi

  Hello

  I just bought a new Satellite Pro L50 - B and it is unable to connect to the wifi of my company 5 GHz network. It connects well to the 2.4 GHz network, but poor performance on network thaat there.

  Is it possible to get the L50 - B to work in the 5 GHz range?

  Thank you

  Martin

  Frequency of 5 GHz is supported by 802.11 A and 802.11 N
  But if the WLan module is not compatible 802.11 A, then the standard 802.11 N will operate at 2.4 Ghz

  The question is: what are the standards WLan are supported by the integrated WLan module?

  Which module WLan is integrated?

• Satellite Pro M10 - horizontal lines on the screen in different areas

  Hi all

  I hope someone can help.
  My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
  It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
  The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

  Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
  A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
  I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
  Perhaps a cooling problem? Or problems of motherboard?
  The motherboard has been replaced twice, hoping that this isn't another mobo problem.

  Any advice would be great.

  Thank you.

  Hello

  I m not 100% sure but to me it looks a bit like an overheating problem
  Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

  I wonder how you were able to replace the graphics chip on the motherboard?  :|
  If I m not wrong not the chip is fixed and the replacement is very easy and difficult

  It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

  Sorry, but that's all I can suggest.

  Best regards from my friend

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite Pro 4600: where to find the drivers

  Where to find drivers for Toshiba Satellite Pro 4600 drivers?
  We cannot choose this model in the support page...

  The drivers for this laptop Satellite Pro 4600 series are on the European driver Toshiba page.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  The laptop seems to be an oldie and therefore you should take a look in the _ * Archives * _ folder!

  Best regards

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye