Satellite Pro L50 does not start with 8 GB

I have a brand new L50 Pro of Satellite (PSKK3A-001001)

Config of RAM is default of 1 x 4 GB memory DDR3 12800 1 use slot 1 slot free
I removed 4GB and install 1 DDR3L 12800 8 GB but it does not start.
The form of State capacity 16 GB so with 2 slots logically, that means 2 x 8 GB cards.
He also said DDRL, which I assume is the correct type.

The 4 GB mark was Hynix and the 8 GB is Apacer.
Anyone have a resolution on this or know what the problem is?

On this forum you can find many threads where people describe similar problems. In most cases the problem is compatibility modules, especially if Ram needs to be upgraded with modules produced by different manufacturers.

According to the specifications of the laptop you need DDR3L memory (1600 Mhz).
Talk with your dealer and ask if there's Kingston compatibility module. Kingston offers high quality and 100% compatible memory modules.

Tags: Toshiba

Similar Questions

  • Satellite Pro 460 does not start with the new drive in

    I recently received a Satellite Pro 460, but he had no hard drive.
    It starts great without a disc in but as soon as I put a new hard drive in it does not start.

    I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

    Someone has any ideas why this is and what I can do about it

    I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

    What HARD drive you are trying to use on this good old classic?

  • Satellite Pro A120 - does not start with 4 GB of memory

    Hi all

    I'm new here so please be gentle!

    I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

    Where I'm going wrong? This model will not take 2 GB memory modules?

    Any advice will be appreciated.

    Best regards

    Dr. Feelgood

    Hello

    Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

    Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

    So please bring back the memory modules and buy 2x1GB. It will work.

  • Satellite Pro A200 - does not start with 4 GB of RAM

    Hello

    I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

    Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

    Hi caribman

    What Satellite Pro A200 you have exactly?

    I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

  • Satellite Pro 480CDT does not start with mounted HARD disk?

    Hello
    I have tried several disks in my Satellite Pro 480CDT, but none of them starts. The screen stays black and the power led blinks orange (long, short, short, short, short, long, short, short). If I drive the machine past the on-screen "In Touch With tomorrow, TOSHIBA. He sees Windows CD-ROM or a floppy disk. I tried with 6 hard drives all below to 6 GB and AFAIK the work. I tried with another 480CDT a 220CS and a 2140CDS. Surely all hard drives and computers laptops have the same flaw? What I need to update BIOS or something as none of the drives are original for the machines.
    Help, please!
    Thank you

    John.

    Hi John

    I'm afraid of nothing that you can do everything alone. When the electronic power supply detects a power problem, it sends the hex code. In this case you should contact the technicians. They can read this code and will know what the problem is here.

    Just FYI: I discovered this disc HARD original for this unit has the P000244000 part number. Maybe it will help you get another HARD drive for testing.

    Sorry I can't tell you more info on this good old classic.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite Pro L300 - does not start form DVD

    Problem: my Satellite Pro L300 will not start no optical drive (DVD)

    Leisure problem scenario:

    Insert the DVD Toshiba recovery in optical disc drive,
    Restart and during the boot prompt, press F12 and select the optical drive.
    Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

    Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

    Model No.: PSLB1E-02200GG3
    Serial 78685377Q

    I'm doing this because I want to change the OS from Vista to XP.

    Hello

    Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

    Have you tested with any other CD bootable (Linux)?

  • Satellite A200 PSAF3A does not start with 4 GB

    Hello

    I have a model A200 PSAF3A-0QH01N.
    I've been led to believe that it supports 4 GB of RAM but does not start with 4 GB, freezes at the toshiba logo.
    Also have A100 running new 4 GB RAM works very well in this machine. Have updated BIOS did not help.

    Any advice?

    According to THIS specification that your laptop can be upgraded up to 4 GB of RAM.

    Downstairs you can also find the part number of the compatible RAM. List of the memory modules are tested and working with your laptop.

    Where have you bought?

  • Satellite Pro M40X does not work with battery

    Hello

    I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
    In recent weeks, the laptop does not work with the battery.
    With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
    The laptop works without battery.

    I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

    I'm sure that battery modules were not upset because I used the battery not very often.
    I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

    Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

    I hope you can help me

    gretings

    Hello

    It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

    Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

  • Satellite Pro C650 - does not start

    Hey all,.

    My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,

    However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.

    The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
    I was hoping you could help me!

    Thanks :)

    I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.

    For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • Satellite Pro A10 does not start - no hard drive

    MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
    WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
    CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
    DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

    Hello

    HARD drive is visible in the BIOS?
    If this isn't the case, then this means that the HARD drive is faulty.
    Try to replace the HDD with a compatible and try again.

    Good luck

  • Satellite Pro L20 does not start

    I have a new satellite pro L20 M750
    does not start
    the thing is since the first time I tried to start it it would not start.
    I bought it over the internet and is still brand new in the plastic bag, would there be anything to make this power for the first time or it is defective.

    Thanks in advance

    Hello

    Did you check if the AC adapter is working properly?
    Initially, the battery is not charged. You must connect the power adapter to recharge the battery.

  • Satellite Pro M10 does not start

    My M10 Pro Sat will not start.
    Power cable shows a green light and a light orange constant and nothing else, but does nothing when the network is not pluged.

    Any suggestions? With our thanks.

    I put t know if this will help you, but what you could do is the following:
    -Unplug the power adapter, remove the battery and wait about 30 min
    -then reconnect the two parts and check to see if you can power the laptop

    It helped me in the past and maybe it will help you too.
    Otherwise:(bien, puis vous devrez contacter le technicien de l'ASP pour la vérification de l'ordinateur portable)

    Welcome and good luck

  • Satellite C660-108 does not start with 8 GB of RAM

    I bought 2 x 4 GB memory modules to upgrade memory up to 8 GB.
    With 8 GB installed, the laptop does not start, but he will start with 6 GB installed.
    Modules 4 GB 6 GB configuration and wood East of 1.8.

    Any ideas?

    Hello

    According to the manual, this laptop can be upgraded up to 8 GB of RAM.

    Then you should be able to use the 2 x 4 GB RAM modules

    I think that both modules are not compatible with each other and therefore cannot boot up the laptop.

    You should test the laptop with the help of other modules.

  • Satellite Pro 480CDT does not start (even in BIOS)

    Hi all

    I just hand on a Toshiba Satellite Pro 480CDT

    I had to work with the original power supply (on an inverter plugged into my 12v cars I wasn't close to 240 v power outlet)

    It worked very well, it boots into Windows 98 and I played with a few programs (Media Player and defragmentation)

    I got it defragment for about 5 minutes, while charging via the car converter, however it froze and I had to hold the power button to restart.

    When I tried to next turn on the screen remains empty, the hard drive is not turn and there is only the power LED and battery LED that lights up.

    He let me press the function key that lights up the fn LED on top of the keyboard, but then after a few presses of lighting stops.

    I opened the case and concluded that there are two batteries of the bios, the look at where they are plugged into the main Board, there is green type of corosion on the pins, I removed the plugs (who might add when it is very difficult to remove because of the coros), I cleaned the plugs (male & female) with a pen of WD40 and plugged in I got a voltmeter on them and they demonstrate tension and also show higher voltage when the power supply for laptop is connected, then it means they are load or at least tension.

    After doing this I go up the laptop, but it still suffers from the same problem?

    Please what could someone help or give me a little advice? My next event is the power supply Board but wanted to get some ideals before hand.

    Thanks in advance.

    Pete

    > after doing this I go up the laptop, but it suffers still from the same problem?

    His pity to hear that your baby dead :(
    But if we move to a diagnosis of material, I doubt someone here might be able to point in the right direction if his motherboard problem, it would be really difficult to solve this problem without using special tools, circuit diagram of motherboard and of course experience

    I think you should check the modules memory vivid faulty ram could affect the laptop everything is just speculation

Maybe you are looking for