Satellite Pro L500-1W4 - cannot install Win 7 Pro after changing the HARD drive

Similar Questions

• How to install hp support assistant after changing the hard drive on my HP Pavilion TouchSmart

  Hi all

  I have recently updated my hard drive and install windows OS 8.1. Okay, everything works fine. But, to get the latest drivers from HP, I want to install: hp support assistant "application. I am trying to download and install, start the installation but not showing any progress.

  I downloaded the folliwng to my product page ' HPSupportSolutionsFramework - 11.51.0027.»

  Any help will be really appreciated.

  Thank you

  MVR

  Hi mvr

  What is your exact model name, product number?

  Try to download, register & then install from this page: http://www8.hp.com/in/en/campaigns/hpsupportassistant/hpsupport.html#.VI62_0Trb4c

  Did you clean install Windows 8.1 or recovery media? Who was the operating system preinstalled on your laptop?

  Concerning

  Visruth

• Cannot retrieve Equium L40-10 after changing the HARD drive

  Equium L40 - 10U Windows Vista 32 bit.

  I had a problem with the HDD (120 GB MK1237GSX) & I replaced it with MK2576GSX - 250 GB)

  I have a the original Toshiba product recovery disk, but I can not reinstall the s/w.

  Windows will load initially and then diskpart seems to be installed OK.

  The installation hangs at Image X for Windows
  I get error 23 c:\programfiles\adobe\reader 8 - data read failed.
  Image X could not apply to Vista F:\05468XSP.swm Index 2 to C:\.

  In addition, the administrator screen shows:
  Failed to initialize the Raid class.
  ANY RIAD continually normally

  I'd appreciate any help with this problem.

  Thank you

  Jim

  Do you use the disc of recovery for the first time?

• Cannot install a version upgrade of Windows Vista after changing the hard drive.

  Original title: my computer gives me a warning... saying backup.

  My hard drive is bad.  I can feel it.

  Keep the system lock up and rebooting message says cable and BAD status.

  I took the hard drive... put in a new one... and now it says I can't install vista.

  I have the version upgrade.

  I put XP on this drive and upgrade again.  Y at - it something I can do.

  I want to just reinstall windows vista on a new drive.  How can I accomplish this.

  The bad hard drive still works and is accessible it is not stable and keeps locking up.

  The full version of XP that I have is out of licenses.  Help Help

  Hi Rob,

  You must install first Windows XP and upgrade to Windows Vista.

  If you have a genuine copy of Windows XP, after you install Windows XP you can contact support for Microsoft's Activation to activate the copy of Windows XP.

  For more information, you can consult the following articles:

  Upgrade Windows XP to Windows Vista

  How to activate Windows XP

• C55 - A satellite - keep Windows after changing the HARD drive?

  Hello

  I want to buy Toshiba Satellite C55 - A, which is pre-installed Windows 8.1 and the recovery on the HARD drive Partition.
  I also want to buy 256 GB SSD and put it in Toshiba (and use the external as hard drive from Toshiba HARD drive).

  Can I install Windows 8.1 that I bought (preinstalled) on the SSD?
  If so, how?

  Of course, you can swap the HARD drive with an SSD.
  The key is the recovery media (USB key or drive).
  You must create a recovery disk to replace the HARD drive.

  Laptop Toshiba computers are preinstalled with software called Toshiba Recovery Media creator.
  This allows you to create a recovery media that you can use to reinstall the system on the new SSD installed!

• Satellite Pro P100 - replacing the HARD drive internal

  I have a Satellite Pro P100 with a concert of 60 internal HDD and would like to replace this with a 250 or 320 GB drive.

  Anyone can suggest a way to imagery of the current drive and copy this back to the new drive without having to re - install the operating system and other installed software?

  I have a couple of USB 2.0 external drives with sufficient capacity.

  Hello

  You first need to know if the more drive HARD 250 GB or 320 GB would be compatible and if the BIOS recognize this HARD drive without major worries!
  The problem is that not all HARD drive sizes are supported by the BIOS.
  Then all first check if the new HARD drive are supported!

  You ask how to get all the files on the new disk? I recommend good reinstall the OS from the recovery CD. It would be to reinstall the OS, drivers, tools, utilities.
  If you have other files such as mp3, etc it then backup to the external USB HDD.
  Then you could connect this HARD drive to the laptop and could transfer it on the internal HARD disk.

  Greetings

• Satellite Pro P300 - remove the HARD drive to make a backup?

  My P300 went to my local store to repair for a network card problem. I thought it was just a software problem or driver, so I wasn't worried that my machine is still under warranty. After investigation, they stated that they could not resolve the issue, so would be to reformat and reinstall the OS, they thought they should solve the problem.

  To my horror, I found that they had broken the seals of guarantee and open to the top of the machine. They claimed the only way to save the P300 before reformat it, is to remove the HARD drive!
  Is this true?
  (It turns out that a broken chip is to blame, but because they violated the warranty, Toshiba will not touch!)

  Can anyone say about this the removal of HD to support it please?

  Hey,.

  Normally it of not necessary to restore the factory settings with to remove the HARD drive but don t you worry about this. The laptop can still be opened from a service provider authorized without losing the warranty.

  I also put t know why they did, perhaps they have checked the material. It would be possible because they have professional diagnostic tools.

  But interesting to know whether or not your problem is now resolved?

• Cannot access through desktop remote after replacing the hard drive

  After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

  Hello

  I appreciate the efforts that you put to publish the query on this forum.

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• Change the HARD drive in the laptop Satellite P10-304

  I bought a new hard drive for my laptop toshiba satellite sp10, can someone tell me were the hard drive is in the laptop, so I can change it as it does not tell you in the instructions booklet
  Thank you
  jm75uk

  Hello

  For some portable models change HARD drive is very simple and not complicated. Change the HARD drive in your case will be not so easy, and in my opinion, you should contact the service partner. I don't know how old is your laptop, and if the warranty is still valid, but as Tobi said if you open the Briefcase with laptop computer on your own, you can lose the warranty.

  I don't know, but the HARD drive should be placed somewhere under keyboard because on this model there is no coverage of HARD drive in the lower corner.

  Good bye

• Satellite P10 - how to change the HARD drive?

  Hello

  I want to change my Satellite P10 for a bigger HARD drive.
  But I Don t know how to remove the DvD drive.

  On this laptop, I mean that the HARD drive is under the DvD drive.

  Please help me, if you know how to change the HARD drive.

  Welcome them

  Mister_X

  Hi Frank,.

  I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

  The hard drive is fixed with 4 screws (2 on each side)

  HTH

• Satellite 5100 503: change the HARD drive and start questions

  My hard drive in my Satellite 5100 broke down and I want to change it.

  According to various posts in the forum, it is not possible to start the 5100 from a CD when there is a (new) hard drive in the machine. And the only way to change the boot sequence is via Windows - what does more - there is no other way to change the settings of the BIOS within Windows.

  I looked in the manual - I find no mention after pressing F12 C or any other combination to change the boot sequence (of course I tried yet without result). The only thing I found possible is to press ESC + F1 for BIOS settings default _restore_. And turning the power on by pressing on the left of the space bar gives me the opportunity to Flash a new BIOS.

  Is this really so? Because that would mean I'm stuck. And in this case I will just save the money for the new hard drive and throw my laptop... (and probably by another brand next time - but I sincerely hope that is not so much...)

  Thanks in advance.

  Best regards
  Thomas

  Nice. ;)
  To my knowledge, it was always possible to boot from the CD. Also, after replacing the HARD drive

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I bought a license LR6 which I installed on a Windows PC, and that works well. I'll change the hard drive of my PC pour an SSD. How do I get por reinstall LR on this new album? I'm going to buy a computer no Mac

  I bought a LR 6 license and I I've installed on my Windows PC slot, I'll change the hard drive pour an SSD, can I use the same license with the serial no that was provided to me and how? I'm going to buy an APPLE Mac computer, can I use the license I bought pour install on the Mac? and how?

  Hello

  You can install Lightroom on 2 computers according to your license.

  You can download it from the following link: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html

  Kind regards

  Tanuj

• Satellite NB10-A-104 - cannot install Win 7 64 bit

  Hi all

  I can't install Windows 7 pro 64-bit original, on my laptop,
  probably the bios does not make me the boot on exsternal burner... the bios is version 1.00 and the hard drive is new...

  what I can do...
  Thank you very much

  If you want to boot from an external source (other then the internal HARD disk), you need to disable startup secure in the BIOS.

  But as far as I know the BIOS supports boot devices: USB FDD, primary HARD disk, USB memory and network (LAN)

• Satellite A200 - PSAE6 U27 - cannot install Win XP - No HDD

  Information for us:
  I have Toshiba Satellite A200 - U27 (PSAE6) with Vista 32 bit

  HELO, I need help!

  What should I do with my Vista?
  I'm not entirely remove this system and install XP Profesional, but I can't because I when I try to install XP pops up the window with this information "you don't have a HARD drive or you do not have power supply on the HARD drive"

  It is impossible, because I can't turn on my laptop with Vista every day.

  Perhaps is - this error connect disk sata HARD... driver or bios driver?

  I n ' know if I think that good. Please help me...

  * Help me..., * what stupid topic. Can you please change and make brief description about your problem? After having done that more people may be interested in the content of thread.

  Just a tip for you: take a look at the other topic of the thread and you'll see that everyone has a sense, but not your one.

  Later we can continue the discussion.