Satellite Pro L500 - does not light

After leaving of my 18 months, 500 L on the night it does not start a brief orange flashing on the edge is everything happening it is full of ideas its been fine until now

Hey Buddy,

Hmm... Correctly it s a hardware malfunction...

But in your case, I'll try this:
Remove the battery and the AC adapter. Then, wait at least an hour and then reconnect the battery and the AC/DC adapter. Make sure that the battery is charged and try to start the laptop.

It starts now?

Tags: Toshiba

Similar Questions

  • Satellite Pro 4230 - does not light

    Hello
    I have the following problem:

    A Satellite Pro 4320 will not feed, DC-in light is on (green), with inserted (quite old) battery, the quickly flashes orange, (charge of compensation, according to manual) battery. If I press the power button / stop, DC-In goes off for half a second and turns on, that of all, nothing else happens.
    The power supply is 15V 4Amps one correct, I load tested it works and provides all the power, according to the specifications. It does not matter if the battery is inserted or not.

    Now the question: is this a battery problem or there is a problem with the entrails of laptops (internal DC converter)? Normally, your laptop should work on the included power supply.

    Best regards
    Nohab.

    Hey,.

    > Normally a laptop should work on the included power supply.
    You're absolutely right, mate. All cell phones work with power supply only, theoretically, a battery is not necessary. That's only important if you want to work without power, otherwise laptop mobile working with power supply only. No battery is needed.

    So my personal opinion it of a card mother dysfunction :(

  • Satellite Pro L500 does not burn DVD

    I have TWO laptops Satellite Pro L500 with a TSSTCorp TS-L633C DVD - RW. BOTH have the same problem - burn a DVD fails during the finalization process, regardless of how fast you burn at.

    Burn the CD works fine.

    Burn fine blank DVDs on a laptop Satellite L500D using the HL-DT-ST DVDRAM GT20N drive, as well as on an another Satellite Pro L500 which is to use a Pioneer drive.

    Two laptop computers with problems are ongoing running Windows 7 Home Premium 64 bit, but nothing else than the software that came with the laptop. Both are new straight out of the box. Driver is the current version driver, from what I can find.

    Any suggestions? When a laptop has shown problems, I thought that maybe it's the reader, but now 2 notebooks of totally different stores showing exactly the same problem?

    Thank you.

    Hello

    Have you tried burning programs such as Nero, Ashampoo Burning Studio? Check this box and we post

  • My Satellite Pro L500 does not charge

    _Hi everyone _

    I really need help, I was so happy with my laptop until this problem started. It started a while ago, I noticed that I had problems loading from my laptop.

    I needed to hold the end of exactly the right angle charger cable into my computer for loading to occur.
    I have let the problem away and now I m in an even worse situation.

    My laptop charge very little, before clicking on disable. It turns on, but after about 30 seconds it will be DESACT.
    The computer records the charger BUT NOT CHARGING, I m lucky to get to the login screen.

    If someone could give me some advice on the repair of my laptop, it would be great. Thank you very much.

    P.S E Iv had the laptop over a year.

    Thanks again.

    > I had to hold the end of charger at just the right angle cable in my computer for loading to occur.
    According to your information, there and lose the connection between the adapter and motherboard
    I think because of the bad connection, the battery could not properly and now the battery is dead.

    I put t see any other solution for you to replace the battery and check the power supply mother board s. In addition, the AC adapter cable must be tested. Maybe its broken too.

  • Satellite Pro C660 does not illuminate

    Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

    any suggestions?

    Hello

    On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
    After doing this connect the power running and try to start again.

    What happens when you do this?

  • The product key on my Satellite Pro P300 does not work

    The product key on my Satellite Pro P300 does not work.
    I entered the key from the sticker on the back of the computer. What I am doing wrong?

    Hello

    Why use this product key?

    Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

    Second, it's an OEM key and it will not work with other versions of Vista!

    Cheers mate

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite Pro L500 will not start on battery only

    Hello!

    I recently bought a Satellite Pro L500 and have the following problems.
    My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
    The only way to get this light off is to remove the battery.

    Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
    Works quite normal, once started - with or without power connected

    SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
    I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

    After having this problem, I've updated to the latest version of the BIOS but nothing helped
    Tried a different battery and did not help
    Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

    Very annoying!
    Please anyone with a solution?

    Hello

    Try this.
    Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
    Together the two parties again, charge the battery and then remove the power adapter.
    Then try to turn on the unit using only the battery.

    If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

  • Satellite Pro A10 does not start - no hard drive

    MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
    WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
    CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
    DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

    Hello

    HARD drive is visible in the BIOS?
    If this isn't the case, then this means that the HARD drive is faulty.
    Try to replace the HDD with a compatible and try again.

    Good luck

  • Satellite Pro L300 - does not start form DVD

    Problem: my Satellite Pro L300 will not start no optical drive (DVD)

    Leisure problem scenario:

    Insert the DVD Toshiba recovery in optical disc drive,
    Restart and during the boot prompt, press F12 and select the optical drive.
    Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

    Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

    Model No.: PSLB1E-02200GG3
    Serial 78685377Q

    I'm doing this because I want to change the OS from Vista to XP.

    Hello

    Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

    Have you tested with any other CD bootable (Linux)?

  • Satellite Pro L500-1VT - not in stock anywhere?

    Hello

    does anyone know why the L500-1VT is out of stock everywhere online and sometimes until the new stock arrives keep getting pushed back?

    Toshiba replace this template with a just a good? i.e. i5 CPU and decent ATI graphics card?

    Hello

    As far as I know the Satellite Pro L500-1VT is available ONLY in Italy and the United Kingdom.
    If you leave somewhere else, you must look for another Pro L500 model with the same specifications of hardware.

    I'm sure that some online dealers would offer similar models Pro L500

    Welcome them

  • Satellite Pro C650 - does not start

    Hey all,.

    My Satellite Pro C650 boot not beyond a certain point. I tried to start in all modes different for example safe mode, mode of networking,

    However this proved unsuccessful, the laptop freezes and I meet a constant and regular beep at the same point every time that I try to start. I even tried to start Linux 12.04 USB to see if it's hardware or software, unfortunately is the same, which means hardware failure.

    The problem is that I don't know the bios beep codes and I can't understand what needs fixing.
    I was hoping you could help me!

    Thanks :)

    I think you need professional help with this problem. I don't know if your laptop is always guaranteed to be valid, but in my opinion, you should contact the nearest Toshiba authorized service provider and ask for help. They have special diagnostic tools and hardware malfunction can be detected and repaired.

    For the addresses and phone numbers, visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • Satellite Pro A40 does not start after water spilled on it

    Hello

    I have a problem with the laptop of my companion. After she pours water on her, she has stopped working (no surprise really lol). I took it to pieces, right down to remove the motherboard to try to find the fault. Now when the AC is connected and batt is in place, NIP of the led, same thing happens without batt.

    BUT the computer does not light when you press the power button. Im guessing that it is a hardware failure, since water isn't really best friend elecrtics, but I was hoping someone else might have other ideas/solutions?

    I searched the toshiba site and found nothing on this laptop.

    Any help is very appreciated!

    Hello Danny

    You are absolutely right. It's probably hardware failure and I fear that the motherboard must be replaced. I recommend you contact Toshiba service partners in your country and look for info on the repair and costs.

    Good luck!

  • Satellite Pro 6100 does not start - power light flashes

    Hello

    I have a Satellite Pro 6100 when I press the power button and HDD lights up briefly then powerlight blinks.
    It seems to Flash a pattern: on (2 sec) flashes (2 seconds) then off (about 8 times)

    What he told me? No fan, no display no hardrive is active.
    Food is ok because it load battery.
    I bought it as it would be something easy to fix ideas?

    Hello

    It sounds bad
    Generally, the power led will blink due to a malfunction of the equipment.
    The LED provides a microcode and only the technician can read this code.
    A common user is not able to read.

    Maybe you'll be able to read this code, but you won't find any description about the meaning of the code.
    I recommend you contact the technician in your country

    But try this:
    Remove the battery and unplug the AC adapter.
    Wait severla times and then plug in the battery and plug in the AC adapter.
    If this does not help, you have aks, a complementary technician...

  • Satellite Pro M40X does not ILLUMINATE

    Hi. -.

    I have a M40X Pro Satellite that I bought 4 years ago. It works well until a few weeks ago.

    I tried to turn it on but nothing happen, nothing, no lights, no sound at all, completely dead.

    It is connected to the power supply and the power light is on, (the battery light does not work since there is a lot of time). I tried to remove the battery, unplug the power cable and after several hours or even days, try to turn it on and I got the same behavior.

    Only power if it is (the power light when you connect the AC power) but when I press the button "turn on" the laptop, nothing happens.

    My laptop isn't under warranty, so if someone could help find a solution that would be great!

    Thank you

    Hello

    I have read your problem related to the failure of hardware. It seems that the motherboard is dead, no doubt, the southbridge. In any case, you should contact the service center:

    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

    Note that the motherboard is one of the most expensive parts of the tower and don't know if it's worthy to replace, it is better to buy a used or a new laptop.

Maybe you are looking for