Satellite Pro L510 cannot access my wireless network

Similar Questions

• Satellite Pro L510 - cannot install and start Intel Link 5100

  Hello

  I have a Satellite Pro L510 (P / N:PSLFML - 002004). Recently, I upgraded my Intel WIFI Link 5100 (my original WLAN is Realtek RTL8191SE). I tried Windows 7 32-bit and 64-bit with intel driver, version 13.4 and 13.5, non of them worked so far. I always get this error 'this device cannot start' in Device Manager

  Can someone help me with this problem please?

  Duy

  Hello

  May I ask why you switched the WLAN card? Something was wrong with your old WLAN or why you did that?

  The WLAN feature was working before the upgrade?

  I can say with certainty why you get this message error, but to me it seems that the WLAN card is not activated, you permit wireless network adapter using the FN + F8 key combination?
  ?

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

  This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

  I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

  I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

  Pics:

  PCMCIA slot

  The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

  Wireless network card

  Wireless network card; It is a little damaged but it still works.

  Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

  Hi Steve

  Well, I can give t well you not answer how you can just remove the PCMCIA slot.
  There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
  Please check this specific device. Perhaps you have overlooked a few screws.

  But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

  Good luck

  Good bye

• Satellite Pro refuses to connect to wireless networks

  Hi guys! I need your help!

  My laptop Satellite Pro has suddenly decided to refuse to connect to wireless networks.
  all except my home router from the sky.

  I have moved since and am not able to connect to the free public Wi - Fi.
  No error message; Just click to connect to a particular network and nothing happens.

  I've been back home since and it connects automatically.
  I have Windows 8 and have not been able to find any trace of the Sky network to deselect etc.

  Any ideas?

  CAL

  > I've been since back home and it connects automatically.
  This means that you can connect to your WiFi network at home without big problems?
  This indicates that s laptop WiFi connection works correctly.

  I put t know what Satellite Pro, you have exactly, but have you checked if you can update the WLan driver?

  What happens if you change the Wlan standard? (802.11 a / B / G or N)
  This can be changed in the Device Manager-> card WLan-> properties-> Advanced tab

• Satellite Pro A120 - cannot access BIOS and install Win XP

  Hello

  I ve a Toshiba Satellite Pro A120, I installed an operating system Linux on ve and uninstalled.

  When I go back to the Windows XP operating system, I just couldn't access the Bios (event the i press F1, F2) and the computer cannot start the windows XP SP2 CD too but it starts windows XP 2001 CD

  Could someone help me please

  Hello

  To access the BIOS, you can try press ESC then F1.
  Pro A120 was equipped with the Toshiba BIOS and that is why the ESC and F1 should functions.

  To boot from the CD of Win XP you can also press F12 immediately after switching on the laptop. This will start on the screen menu and there you can choose the CD/DVD drive as the boot source!

  Welcome them

• Satellite Pro L500: Cannot access Microsoft Office - need serial key

  Cannot access Microsoft Office on my laptop, the series Satellite Pro L500, need a product key of 25 letter/symbol.
  Not with the paperwork, instruction manual, or on laptop background.
  Found a key to the letter or symbol 25 on bottom of laptop, but Microsoft Word/Publisher/excel etc will not accept?

  Hi mate

  AFAIK the preinstalled Office is a trial version!
  You cannot use the serial key you found at the bottom of the unit because the key to this series is a serial OEM key and it belongs to the version preinstalled Windows.

  So if you want to enable the office, then you will need to purchase the full license!

  See you soon

• Satellite Pro L300 (PSLB9E) - need to wireless network drivers for Server 2003

  Hi all

  I put the Server 2003 on my new laptop for a University project. I got everything to work except for the wireless. I've tired the latest drivers from the support site for that laptop, but they did not work.

  Does anyone know if there are any drivers for my wireless card so that it will work on Server 2003? Or how can I know exactly what I have in the machine I said it the wireless card may not be an Intel card could be an Atheros card?

  Thank you

  Hello Jack

  Server 2003 is not supported on Toshiba laptops and you must try to find somewhere on the net.
  According to the specification of your Satellite Pro notebook has REALTEK 802.11(B/G) 13CH-RTL8187B WLAN card.

• Satellite M45-S265 - cannot install the wireless network

  Hi all!

  My laptop has had a big problem and HARD drive crashed. Unfortunately I lost all the data with no chance to recover anything. I installed a new HARD drive. I installed Win XP - SP3.

  But I'm unable to install the wireless network. I continue to pass the button in front of the laptop - nothing. I type the combination Fn + F8 - nothing. I think that I have not installed the driver corectly.

  P.S. - of course, I lost the CD.

  Can someone help me?

  Thank you.

  Hey,.

  > I think that I have not installed the driver corectly.
  Then you need to (re) install the WLAN driver. Otherwise, you are not able to use the WLAN connection correctly.

  Anyway, your model is listed on official Toshiba US page so that you can get all the drivers:
  http://www.CSD.Toshiba.com

  If you have any other questions, please let us know! :)

• Satellite M70-181 - cannot see the wireless network

  Hello

  I reinstalled the entire system (Windows XP) and now system did not see the network wireless at all. How can I install it and put it back?

  Laptop Satellite M70-181.

  Thank you.

  Hello!

  Have you installed all the drivers for your laptop and also the network wireless driver? You can find all the drivers on the Toshiba site.
  Check for yellow exclamation marks Device Manager.

  Here in the forum, you can find 100 or discussions on the wireless LAN using.. Please search for it.
  Use of WLAN you should check the TCP/IP (DHCP or IP) WLAN card settings and you should use the same standard WLAN (e.g. 802. 11b) as on the router. Then, you should see the router and if you know the password, however, you can connect.
  If you can find t the router, disconnect it from the AC/DC adapter for 5 minutes and then plug it in again.

  Good bye

• Satellite A300 - cannot locate any wireless network

  Hi all

  I just bougth today a Satellite A300, everything works fine except the wireless access. Ethernet access works very well, and the problem is not with my wireless device since it works with my old laptop.

  It cannot locate any wireless network. It does not appear to be activated WLAN and I don't know how to enable it in the BIOS.

  The swicht wireles on the front of the laptop is turned ON, but not the function Fn + F8 appearing at all.

  Can anyone help please?

  What you mean with this WLAN is in the BIOS not enabled? Normally, you can change all BIOS options then try to activate it.
  Also make sure that the WLAN switch is on and active with FN + F8.

  Visit the Toshiba for a driver and the update to the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite Pro L510 - computer laptop Toshiba DVD - RAM cannot read disks

  My laptop toshiba Satellite Pro L510 computer may not play all discs as I installed Microsoft Expression Studio 4 by using the original CD... now whenever I insert a disc, the dvd - ram turns the disc for a few seconds and thn stops spinnig.

  Then drive shows that there is nothing inside the disk and it is completely empty.

  I can't even restart my operating system discs cannot be read from the bios either.
  I uninstalled the drive, the updated drivers, but it did not help. Please help me, I really need to use dvd ram... I use windows xp sp2 and using the laptop for 8-9 months...

  Help, please!

  http://www.Microsoft.com/UK/expression/products/StudioUltimate_SysRequirements.aspx
  According to this statement you must have installed Windows XP SP3 home edition.

  Your ad is a bit confusing to me. You have a problem with the functionality of DVD - RAM or optical disc drive cannot read all drives (different CD, DVD, DVD - R formats. DVD + R and so on)?

  I put t know what is the problem with the optical disc drive, but way generally, an installation of software packages has nothing to do with ODD when you use it as first boot device.
  > I can not even restart my operating system discs cannot be read from the BIOS either.
  Restart or reinstall?
  Is a readable recovery DVDs when you try to start the recovery image installation?

• Satellite Pro L850-1 p 7 - wireless LAN problems

  I recently bought a L850 Pro Satellite 1 p 7 and led to a new installation on Windows 7 (64-bit)

  After the new installation, I manually installed the driver for the network card, I then shot all windows updates.

  In Device Manager, I noticed that it lacks a few downloaded drivers so a load of drivers who have resolved most of the issues.

  I don't have one that is still yellow, it's for network controller.

  My one question is with wireless network.

  I tried to install several drivers, but cannot get the wireless network card to show in the settings of the card.

  I can see a bit of reading I have a wireless / Atheros Bluetooth combo.

  Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter. After that I turn on Bluetooth with F12 function key, it warns me about issues with Bluetooth and wireless on at the same time.

  I also noticed that windows tells me there is a problem with the Bluetooth software and am trying to get download and install driver_bluetooth_TC00131900C

  This does not seem to fix anything.

  Has anyone else had this problem and the fix is? I really need to get my wireless working...

  See you soon
  Dave

  Hello

  You are right, that the Satellite Pro L850-1 p 7 was equipped with the WLan ATHEROS 802.11 A/G/N WB222 card, which also supports Bluetooth.

  > Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter.
  It is almost correct. But you forgot to install the Atheros WLan driver.
  You must first install the Atheros WLan driver then the filter package Atheros Bluetooth and battery Bluetooth.

  This should be the key ;)

• Satellite Pro L510 (PSLGXA-002002) lights at 09:50.

  Hello. My Satellite Pro L510 (PSLGXA-002002) on automatically every morning at about 09:50.
  He does Hibernate, sleep or death. AC or battery, he'll do it on either.

  I have Windows 7 64 bit and the BIOS update v.1.1.

  Also Ubuntu is a total failure on this computer, cannot even get a boot cd or usb to work, if anyone has any advice on that, I would be grateful.

  Hello

  I had a similar problem my laptop turns on itself so I turned off in the BIOS the following as suggested here in the forum:
  Wake up on LAN
  Wake on keyboard
  Sleep USB & Charge

  Take a look in the BIOS for these parameters and test again.

  In addition, you must wait for a new version of the BIOS. On another model of laptop, this problem was solved by new BIOS. :)

• How to get two laptops to access the wireless network.

  My chip wireless on a Dell Inspiron 1520 laptop (intel pro wireless 3954bg) can find the wireless network if I use Intel Pro software, but Windows cannot find the wireless network. My real growth problem trying to connect a second computer; an IBM T42 think Pad computer to the wireless network, but I get a message that the network is secure, and the second computer keeps trying to acquire an address, but will not acquire an address. He just continues to try to acquire again and again, he can never acquire it. This second computer using Windows to configure the Wi - Fi connection and was working fine until I tried to connect the Dell laptop upward. Then, the IBM laptop cannot acquire an address. I go around and try to understand it. Someone at - it information to solve this problem? Both computers are runing Windows XP Pro SP3. My wireless router is a Belkin54g (F5D7230-4V8000)

  Thanks for any help,

  Btk (billy the kid)

  You can control a with either wireless network adapter software integrated in Windows XP (or WZC Wireless Zero Configuration) or with software provided by the manufacturer of the card (for example, Intel PROSet/Wireless), but not both at the same time.

  Most, but not all, software configuration wireless no Windows is smart enough to disable WZC automatically.

  There are a few sites that offer "safety tips" for wireless networks which includes 'hide' your wireless network by disabling the SSID broadcast.  This is not a good idea and does not, in fact, your wireless security.  See http://blogs.technet.com/b/steriley/archive/2007/10/16/myth-vs-reality-wireless-ssids.aspx if you have disabled broadcast SSID of your router, automatic configuration won't be able to find it.

  I get a message that the network is secure, and the second computer guard trying to acquire an address, but will not acquire an address

  If you have enabled encryption wireless router (a very good idea), you will need to enter the correct password in order to connect a find an IP address. What type of wireless encryption configured on the router?

  This second computer using Windows to configure the Wi - Fi connection and was working fine until I tried to connect the Dell laptop upward. Then the IBM laptop cannot acquire an address.

  You have changed something else.  The idea of a wireless network is to allow multiple computers to connect; connection to a computer shouldn't affect how another computer connects.

  The easiest way is to configure your router to connect a computer using an Ethernet cable (if you connect wireless, you will be disconnected when you make a change to the configuration of the router wireless).  For the Belkin router User Guide is here--> http://cache-www.belkin.com/support/dl/p74559-f_f5d7230-4v8xxx_manual.pdf

  Open a web browser (Internet Explorer, Firefox, etc.) and type 192.168.2.1 in the address box.  You should get to the home page of the router. Click on the "Login" link at the top.  The default password for the router is blank (no password) unless you changed it.

  Click on the link "Channel and SSID" under the heading "wireless" on the left side of the page.

  • Make sure that there is to check the "Broadcast SSID"
  • "Wireless mode" should be "g only" or "fashion g and b" (the latter is necessary only if you have a very old b wireless adapter in one of your computers)
  • I suggest you let off QoS (but click on "more info" or see what says the User Guide)
  • The wireless channel should be 1, 6 or 11.  If you have no difficulties, let him you will find
  • "Protected mode" should be off (but click on "more info" or see what says the User Guide)
  • If you make changes, click on "Apply Changes".

  Click on the 'Security' line under the heading "wireless".  You should be able to see both what type (if any) encryption is configured (64-bit WEP, 128-bit WEP, WPA, or WPA2) and the password (if any).  Unless your computer maps are old, you should use WPA2.  If the adapter in one or more of your computers is too old to be capable of WPA2, use WPA.  Regardless of the bit, WEP length, is easily broken.