Satellite Pro L630 close without warning

Similar Questions

• Satellite Pro M30 descending without warning

  Hello

  My old one year Toshiba Satellite Pro with a card his Sigma such C - Major DIES many times when I start a good intensive application, such as Sound Forge, or Windows Media Player or a game like GTA Vice City or Return to Castle Wolfenstein and much more, the computer just turned off, instantly. Dead. Without any warning. At this point, something sticks in memory because he did re - will not power switch start.

  No, remove the battery and unplug the power cord and then putting them back in. This happens maybe every third or fourth time, but only with a program that plays music or some sort of sound effect. Can anyone help?

  Hello

  I have the same opinion as TOM. It is possible that the overheating is responsible for laptop, closing. If the processor is very hot and before it can be damaged the protection mechanism, switch off the appliance. I'm sure that the device must be cleaned and after that the heat can be removed from the unit.

  If there is no way to clean only contact service partner in your country.

• C55 - A satellite - files keep close without warning

  Hello

  I have a Toshiba Satellite C55-A-1CQ with lots of free memory.
  When I try and copy images from one folder to another, it closes files and brings back me to the screen.
  I tried to move only small files rather than groups of files, but it has the same effect.

  If someone saw it, I'd appreciate it.
  Thank you
  Ben

  For me, looks like the system is confused upward... I have no idea if the cleaning system could help with this strange problem, but I recommend you to check the application "CCLeaner". It is small freeware tool that could help you to clean the system registry as well as to remove the HDD of garbage (temporal files).

  Also its recommended to defragment the HARD drive.

• Satellite Pro L630-12: the Ethernet controller v v. WLAN network card

  Basic questions:
  My Satellite Pro L630-12F has (A) an Atheros AR8151 PCI - E Gigabit Ethernet Controller, and (B) Broadcom 802.11n Network Adapter.
  Toshiba continues regularly informing me that a Wireless Lan Driver update was released, which I need to install.

  First question: is Wireless LAN Ethernet controller driver or the network card?

  I have check the versions on my machine of both (A) and (B) with the PC diagnostic tool and find that (B) is the latest version (5.60.48.35) and (A) is a very old version (1.0.0.26). I download the latest version (9.2.0.316.0) of "Atheros Wireless LAN Adapter" for my machine from the Wireless LAN Driver download page (Windows 7 (64)) and run the file. But, everywhere I look, my machine continues to say that the version of (A) is (1.0.0.26).

  Second question: am I update the Ethernet Atheros controller when I download and run the Atheros Wireless LAN Adapter?
  If Yes, then why doesn't it show the latest version information?

  Sorry for the basic questions, but I found no explanations in various forums on the difference between 'ethernet controller', 'network card' and 'Wireless LAN' after searching several times. I'm afraid that Toshiba keeps informing me that I don't have the latest version of the wireless LAN driver despite my efforts to follow their instructions.

  > First question: is Wireless LAN Ethernet controller driver or the network card?

  Ethernet controller can be both; WLan and LAN in your case I guess that WLan is Ethernet controller, it would seem if the WLan driver is not installed

  Your laptop L630-12F seems to bear card Broadcom BCM94313 WLan and the driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  > Am updated the Ethernet Atheros controller when I download and run the Atheros Wireless LAN Adapter?

  This is driver LAN!

• Satellite Pro L630-L14 - the unhandled exception message

  I'm no expert, but I was hoping that someone could tell me how to get rid of / fix an error message thatI do me whenever I put on. The unhandled exception, said "access to PathC:\ProgrammeData\ToshibaEurope|. Registration\se fittings xml is denied. "

  I had a Trojan horse affecting this laptop two weeks ago and he (or hidden) wiping most of the material I had on this machine.
  Thanks I've got it running again, but this unhandled exception appears every time so I have to type Quit or he keeps coming back.

  I have no idea how to fix this problem. I checked everything and so has my son, remotely and this morning I ran MalwareBytes and allowed the two files, but I still get the message unhandled exception.
  It's annoying because I don't know if I need to have access to this road. If someone can tell me how do I cure this I would be grateful, but please keep in mind, I'm just a user with limited experience. It's a Satellite Pro L630-L14 and I got just TWO MONTHS! stevmk2

  Hello

  I think the problem is the Trojan horse you had. It was probably something has changed on the access to the files/folders. If you can t remove the Trojan with Antivirus software, you must reinstall the whole operating system. Therefore, you can use the recovery disk as described here:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

  > I got it just TWO MONTHS!
  Who makes no difference, how is the laptop. This viral infection can happen after a few days and it s depending on your antivirus software you use, but it has absolutely nothing to do with the brand of laptop.

• Satellite Pro L630 connect to TV Toshiba

  I'm trying to connect my laptop to my TV. The specifications are:

  Laptop: Toshiba Satellite Pro L630 - 134.
  TV: Toshiba Regza CT-42RL853.

  I am trying to achieve connectivity via HDMI. Once I have connected the TV to the laptop, I try to switch the display. However, the laptop does not see the TV (made to each function F5 or via Control Panel). The other view is not be found even when I select detect.

  Does anyone have any ideas?

  Things I've tried:
  Looked in the BIOS but no parameters to allow another external screen.
  Tried to look in the settings of the TV to see if there are access port to allow/disallow settings but nothing appears.
  Shot to the top of Toshiba Media Controller on laptop. He seems to see the tv (screen name on the right side). However no image displayed on the tv.

  Someone else has solved this problem?

  Thanks in advance.

  Sean

  Hello Sean

  To be honest after reading your ad, I can't say with certainty what can be the problem. The fact is that, in most cases, it takes work and if there is not a small problem.

  In the past, I have connected several laptops from Toshiba on my BRAVIA LCD TV and everything went well every time. On television, you must enable HDMI port you use. If you have more HDMI ports do not forget the right turned to television.

  On the other hand, if your TV is recognized by your laptop when you press FN + F5, you should see several options there. You see it or just one option (LCD)?
  Are you using the original pre-installed OS that you got with your laptop (original drivers)?
  Have you tried using different HDMI cables?

• Satellite Pro L630-167 - Win 7 connection to the very slow connection menu

  Hello

  I have a Satellite Pro L630-167, which is connected to my network works.
  I have this problem where the screen stays just on the Please wait screen, it seems that the laptop is that connects something, but not really do anything.

  However if I had to start the computer in safe mode with network it works fine.

  Any ideas?

  I really need some help here.

  Kind regards

  JT

  Hello

  Have you noticed the problem even if the laptop is not connected to the network and if you want to load your user profile on Windows 7?

  If this isn't the case, then I guess that it has something to do with the network, and in this case, I recommend asking the network administrator for a few suggestions.

• Satellite Pro L630-12F constantly read hard drive

  My laptop 2 months old, satellite pro L630-12F, running windows 7, just started to constantly read the hard drive in windows. The light is still on. When I try to do something, it takes forever-. for example, click on the start menu. Wait a minute, while the cirlce thing appears and the start menu.

  If I do too much hard drive starts to make a ticking noise and possibly a BSOD appears and it restarts.

  If I try to stop or restart it takes forever to do.

  When I go into safe mode, it just does the same thing.

  Any suggestions as to what is happening and how I can fix this problem?

  Hello
  At first I thought that the constantly HARD drive activity can be because of preinstalled McAffe and HDD scan but this info on ticking noise and possibly a BSOD is really strange and I'm afraid that there must be another reason m.

  Have you noticed this behavior from the first day or later?
  It will be interesting to know if the same behavior is with its own OS preinstalled. Can you install new OS by using recovery image and test it with the factory settings?

  In the worst case I mean that the HARD disk must be exchanged.

• my lap top was close without warning or command especially when I watch movies online

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  my lap top was close without warning or command especially when I watch movies online.i just ts will puff and must be reseeded again and again

  Looks like it's overheating.

  Use Bing or Google to search for information on your particular laptop (maybe the support forum for your Dell, Toshiba, HP, etc.) and determine how to combat overheating.  You may be able to 'fix' it's using compressed air to clean the vents and/or using a cooling pad under the computer laptop and even run a small fan external imed in the inlet.  May not be recommended by people IT but I often run my old laptop without battery to reduce heating.  And of course, you might have a fan does not properly.

  Doubtful that the malware is causing your problem.   You have every reason to think otherwise - no evidence of infection

  Kind regards...

• Vista close without warning

  Lately my pc has been randomly close without warning.  It doesn't seem to be compatible on when he decided to "shut down".  I noticed that if I turn it on and just leave, so it seems that the time it takes to turn off is shorter.  But the time intervals are different each time.  If I turn it on and use a heavy application immediately (like Need for Speed) and it remains on 90% of the time without problem.  I tried a number of analyses of virus and so far nothing has much turned upward.  I checked my hardware and all is well.  There is a problem in the windows registry, virus, or vista is just corrupt.

  I am running:
  Vista Business SP2
  3 GB ram
  3.0 ghz AMD Athlon 2 x
  NVIDIA 9500 GT graphics card
  PC Chips motherboard
  80 GB HD (hard drive was free, hoping to get a much bigger VERY soon)
  Hello
   
  1. don't you make changes before the show?
   
  This happens usually if the program or device driver is defective.
   
  Step 1: to find out what is causing the problem, check the event logs to find out what is causing the problem.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
   
  You can try the following steps to keep your system up to date, as it has sometimes solves the problem.
   
  Step 2: we recommend updating all drivers for devices on the computer and install the latest updates of windows for better functionality.
  To update the device driver, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2 to the list of issues, do a right-click on the following and click on update driver.
  a. graphics cards.
  b. the network cards.
  c. Chipset driver.
  3. If prompted, restart the computer and follow the same steps for updating other drivers.
  
  For more information about updated drivers, visit this link: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Step 3: check in safe mode.
  If the problem does not persist in safemode, it then confirms that some programs not Microsoft is causing this issue.
  Visit this link to start the computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
   
  If the problem persists, check the logs of events and after return details, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Satellite Pro L450 - network without WIRE Realtek RTL8191SE adapter: limited access

  Hello

  Hoping you can help me with my problem with the wifi connection.

  OS: Windows 7
  Wireless adapter: Realtek RTL8191SE Wireless LAN adapter
  Laptop: Toshiba Satellite Pro L450
  Wireless router/modem: Cisco

  When I turn on the laptop the wifi connection can work for 10-30 minutes, but then the down network access but remains connected with limited access.
  Then restart the connection will have access limited the offset.
  In addition, sometimes the available wireless connections do not show in the networks available on the windows toolbar.
  When you use the Ethernet cable connected to my router there is no problem.

  I have searched the forums for help on this and have already tried without success, the following

  Updated driver: issue date may 2010
  Verify that TCP/IP has been installed to automatically obtain the IP and DNS
  Disabled firewall
  Reset the modem
  Countless reboots of the modem and the laptop

  Wireless modem/router works perfectly as I can connect with other devices and laptops.
  Is it a problem that we see on a regular basis with this combination of laptop card / without wire/operating system?
  Would appreciate any guidance you can give me as it becomes very frustrating.

  Thank you

  Kieran

  Hello

  I see you didn't check the BIOS!
  Here you can compare the BIOS with the version update available.
  If you have an older version of the BIOS on the laptop, then an update would be recommended.
  Once the update to the BIOS it defined it please to the default settings (press BIOS F9 and save)!

  By the way:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads
  Here you can find the latest WLan driver
  It s v.2015.1.0427.2010 at the moment

  PS: I hope that Windows 7 is up to date...

• Can I use Express Media Player on Satellite Pro M70 delivered without it?

  Hello world

  I have a portable Satellite Pro M70 which has not been installed with Express Media Player. In addition, my recovery CD too are not the Express Media Player software on it. Is there a way I can download this Express Media Player and even install on my laptop. If so can someone let me have this link download and any other procedure for doing the same thing.

  Thank you
  Marzi

  I put t agree with the user above.
  Microsoft Windows player is not the same as the Express Media Player, which is sometimes delivered with Toshiba laptops.
  As far as I know, this software cannot be downloaded and it s version an OEM if it s preinstalled on your laptop.
  In this forum, you will find some comments on this topic.
  To my knowledge, you cannot obtain and order the CD of Express Media Player if this application has not been delivered with your laptop.

  Unfortunately, nothing to do.

• How to reformat the Satellite Pro C660-21 without recovery disks?

  I have a Trojan horse on my Toshiba Satellite Pro C660-21f, I have more available disks to reformat the laptop.

  Is there a way that I can do?

  You can install recovery image using recovery disk (F8 at startup) facility?

• My gateway Tablet close without warning. Now more trouble...

  My Gateway Tablet PC with windows XP stops without warning a few days ago. Now when I try to start, it doesn't do anything (the screen is black, fan works, power and light is on), it will start up, I log on, and then it crashes after a few minutes, or the screen goes black (power light always). I managed to make it work yesterday, and I ran the Microsoft Saftey Scanner. He came clean. I keep reading on overheating which could cause this, but I don't think that's it. The fan seems to work very well, and it does not start or stops immediately after 2 days of course stop. It worked fine before all this, what's wrong? Help, please!

  Hi Bmjohnso9192,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 2: You can also check the below mentioned article Microsoft Knowledge Base and check if the problem persists.

   

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  Let us know if that helps.

• Problem of volume with Satellite Pro L630

  Hello
  Brand new on these forums so forgive me if I am in the wrong part of the forum.
  My L630 bought 19 November 2011, and has downgraded the OS XP Pro. Problems with the volume that is barely audible when full! Is there than some tweak I can do to improve the volume?
  Thanks heaps...
  Murphy

  Hello

  You can try to adjust the volume to a higher level.

  Go to control panel of control-> sound, speech and audio devices-> sounds and Audio devices

  Now, go to the Audio tab (line from the top of the buttons) and in reading his article click the Volume button.
  In the Volume Control Panel, click the Options menu button and choose Properties.

  In the properties panel check all the boxes unchecked.
  Now you should see all the volume controls which could be addressed at the next level.