Satellite Pro L650 turns off after start; DC In and Power LEDs blink on stop

Similar Questions

• iPhone 6s turns off after start upward with 30% of remaining battery

  6 s iPhone will turn off after starting with30% battery left please help

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Satellite A60-712 - turn off after 2-3 seconds

  Hello everyone.

  I am trying to fix this Satellite A60-712; He came to me without feeder, but I found a compatible and it seems to work: CC in LED lights up and the battery starts to charge.

  My problem is that this starts Mobile for awhile, radiator begins to turn, all the lights are normally, but, all of a sudden everything turns off after 2-3 seconds. I have observed that this machine has only one slot of free RAM and noted that it has integrated the module memory motherboard; that would be the problem? Or another reason?

  Could someone help me?
  Thank you.

  Hello

  > it came to me without feeder, but I found a compatible
  Can you please test it with a Toshiba original AC/DC adapter? The same thing is happening?

  If the laptop has already integrated memory motherboard there is no problem. Alternatively, you can use the laptop without additional RAM module.

  In the worst cases, you need professional help of an authorized service provider. :(

• Satellite M200 screen turns off after that start & battery does not charge

  Hello, I am from Jakarta, Indonesia
  I have a problem with my Toshiba Satellite M200 Notebook (running Windows 7 Home Premium)

  After I press the power button to the top of my laptop, it works fine display BIOS and Windows startup screen.
  but after that my monitor off all of a sudden when Windows is supposed to show the login screen.

  Sometimes, the monitor doesn't turn off, but shows a lower resolution (I don't know exactly what resolution, 1024 x 768 or 800 x 600, i use maybe 1280 x 800)
  so the only thing I can do is, press the power button to stop bad then press power again turns on, my monitor works normally
  try to stop and then turn on again in a few hours later, problems still comes once.

  from the moment where I install Windows 7, I use 8.15.10.1930 version of the driver (downloaded from Download Center of Intel, which included Assistant TV Intel)
  2 days ago, my friend told me that I should install the driver from the Toshiba site support, so I went to csd.toshiba.com and download the 8.15.10.1825 version of this site (which is not included Assistant TV Intel)

  my monitor works normally after I installed the driver I of csd.toshiba.com, so I think that the problem because the Intel TV Wizard somehow messed with my laptop. But this morning this problem once again, my turns just monitor suddenly...

  In addition, this problem seems to be my battery was unable to recharge, my completely reloaded Windows shows, but when I plugged my AC adapter,
  There are 15-20 minutes before my laptop turns off automatically

  Three months ago, I just brought my laptop to the local Service Center of Toshiba and bought the new motherboard to replace my old mobo (which have a VGA problem too!)
  Is there something I can do (related to Windows or driver/software) or I can bring my notebook at the center of service again?
  are they somehow an incorrect wiring when replacing my motherboard?
  and am I need to replace my battery too?

  I use this laptop for about a year and a half and there is nothing wrong with my battery before replacing the motherboard

  any help would be appreciated :D

  Hello

  Talk about your screen, the a graphics driver causes this malfunction with resolution and turn off. Go to the page of the toshiba driver and download the correct Vga driver for your model. I see, you are running Windows 7, if there is no driver for win7, try the vista driver.
  On your power supply, you have used for the year and a half and he is released in 20 minutes, there is nothing strange. It's standard for power supply operating period, need to be replaced. Just to be sure, you can check with a new battery. You will see that the trick works as expected.

  Welcome them

• Satellite M60/M55: Turns off after power loss

  Reposting because the original threads are locked.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15285&MessageID=55746
  My M60 sometimes turns off immediately after unplugging the power supply (AC power or plug the laptop CC), instead of out on the battery even though the battery is fully charged.
  The battery is OK & the laptop starts regularly on the battery after pressing the on switch.
  The Toshiba Power Saver seems to work OK & I have the latest version of the BIOS.
  I always save my work before unplugging, but again, I do not like this behavior & would appreciate some good advice.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19092
  Satellite M55 turns off by unplugging the power cable to unplug my laptop making rather that to the battery, my laptop will often simply turn off even though the battery is fully charged. Other time things work as it should.

  I had the motherboard replaced for another reason and was quite surprised to notice the problem after a replacement (but without reinstalling OS).
  The main suspect is the TPS and its pilot; A few months ago, a new version is released the Toshiba support site for M60 (although file dates are not fresh, and I think that I have installed this version earlier).

  So, I removed the GST and the GST pilot. I tried several times and it didn't happen again. Not even when I reinstalled the.

  During the test, I have disabled the HD write cache to avoid file corruption problems (but this slows down HD operation, particularly of hibernation).
  I don't know if it works because also earlier the computer would be closed only occasionally, not all the time. But this may be a clue in case you have this problem. If you do, please test and report the result, no matter what the result is.

  What to say dude. The problem is that this problem occurs ONLY occasionally and so it's not easy to find the real reason for these cases.

  However, I would try to give some useful advice, but first of all, it would be useful to know how old your battery.
  Fact is that batteries old and stressed loose clean performance very quickly.
  My battery is about 3 years and my laptop running on battery for 10-20 seconds even if it s fully charged. The performance is simple very low!

  On the other hand the problem could be related to faulty electronic power to the Board of Directors
  As you can see it's not easy to tell what's exactly wrong and as already suggested in other threads (locked), you should ask a technician for a control of the laptop.
  The guy could run diagnostics tests and can locate the fault.

  Best regards

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• Satellite Pro A60 cuts off after 3 minutes

  Hello

  work in IT Support generates many puzzles, but I currently have a Satellite Pro A60 which cuts off after 3 minutes.
  I have deleted the main CPU fan and have noticed that the VGA Chip Set fan fails.

  It is not at all which makes me think that it is completely broken or there is a problem with the motherboard.
  Who is more likely and if not card mother, can I buy a VGA heatsink thermal elemnet / separate fan and if so what is the part number and ball park cost?

  Matthew

  Hello

  As you already suggested this strange faucet portable bottom may be related to high temperature and to overheating.
  You are right; the malfunction of the fan could be a reason to close automatically and sometimes down.

  > can I buy a VGA heatsink thermal elemnet / separate fan

  Usually, the cooling modules are pieces separately and can be replaced.
  But notebooks disassemble and replacement of cooling modules is not easy and a little more difficult for someone who has no experience and never changed something like that. It s just too risky, because this person may damage the motherboard very easily.

  So, it's probably best to contact the technician of specifications for these s replacements!
  The ASP can command the support of the head of Toshiba warehouse cooling modules and compatible and could replace it.

  Best wishes & congratulations buddy ;)

• Acer 5742 screen turns off after starting

  Hi - looking for help from you guys please

  Got an acer 5742 running windows 7. All of a sudden the display has stopped working.

  It starts very well and the screen works to the point of "starting windows." I see the logo of windows for a bit, then it turns off.

  If I plug it into an external monitor, it works very well. In the chart properties, the screen is not yet listed (only external shows upwards). Help please!

  Hello...

  You can try to start your computer in safe mode by pressing the F8 key when you start your computer.

  If you can't login failure mode, connect the external display > from the Start menu, type Device Manager in the start search box and press enter.

  In the window Device Manager left click on the arrow next to "Graphics card", then right-click on the name of the display adapter and uninstall it. Watson computer to check if there is display after loading windows.

• Satellite Pro L650/L650D does not start

  My laptop Toshiba does not work...

  When he was for a restart, the it closed suddenly... I want to start (start), but when I clicked on the Start button, it does not start... The LED lights were lit, but the laptop does not start...
  At the present time, the lights went out, I don't know how...

  It means that the laptop is break down?
  I hope not, because I don't want to spend more money with that... :(

  Is there someone who could solve this problem?

  Thank you very much, long in advance,
  Raquel

  It is not easy to solve these questions, because nobody knows what is the problem. It may be BIOS related issue or some other hardware related issue.
  It's that there are not a lot of options in this regard.

  You can try to remove the battery and unplug the power supply, press the power button / stop for a while and try again with power running. The same thing happens again?

  > The lights were on, but the laptop does not start...
  You hear cooling ventilation? When the laptop is turned ON it turns off a few seconds later or stays, but without any reaction simply?

• Satellite A100 - monitor turns off after reboot

  Not here a load of HARD drive, also if the output of the BIOS not are displays logo. Just how to work again with turn off phone then turn on again. I also try external VGA display with cable (VGA VGA) have same problem.

  I try to put the connector again still.

  Toshiba Satellite A100 (model PSAA8) chipset Intel

  Hey mate,

  If you have the same problem on an external monitor I think that it s related to the motherboard or something else. He should t be a problem of the internal screen I think

  It's really hard to say something about it, but you can try to update the display driver and BIOS. The two you can find on the Toshiba site.
  Check it!

  In addition, it would be interesting to know what operating system you are using. Operating system preinstalled Toshiba?

• screen turns off after starting

  I have Windows XP Edition family service pack 3 computer desk Dell old to two years. Recently encountered a new problem. After starting OK, the screen of the monitor removed and remained empty after a few minutes (I don't have the time, but it seems to be not in hours minutes). The computer is "on" (I hear the fan), but nothing I could "wake up".  I found the monitor connection and cables were all OK. I could restart by closing with the power switch, power failure, wait a little while and then restart. System worked normally, monitor NSB OK for awhile... and then "deleted again" after a few minutes. To try to solve the problem, I restarted (see above) and then disabled 'power save' and 'Hibernate '; all energy and hibernation is DISABLED. The problem seems to have disappeared; While we're talking the computer stays on normally with normal display, etc. Assuming that the problem is actually related to register and/or hibernate, what I have to live with these features off? Other comments as to what is the problem? Thank you. Matt Sagal

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  Step 2: You can try to create a new power scheme and check what is happening.
  Reference: http://technet.microsoft.com/en-us/library/cc771632.aspx

• The display turns off after a few minutes and shows 'No Signal'

  Hey guys, I was faced with a weird problem recently. My desktop monitor turns off by itself after a few minutes, but the works of CPU, I can hear the fan running and see the lights blink. One thing I noticed, is that when the screen turns off, the light Orange on the processor rest on which flashes normally just. My PC works normally on the mode without failure, but worse, safe mode, but I can't work on my software CorelDRAW. This may be the problem of SMPS? because recently, my entries of mouse and keyboard did not work due to which I got a USB keyboard and a mouse. I recently installed Windows 7 64 bit, but I think that shouldn't cause the problem since I have worked with Windows 64-bit before on the same machine.

  PC configuration-

  Intel Core 2 Duo 4500 @ 2.20 Ghz processor
  ASUS P5QPL-AM motherboard
  3 GB RAM
  No (not sure, maybe integrated) graphics card
  1 TB harddrive

  PS - I couldn't find an exact category for my problem.

  Hey Archer
  Currently, I formatted my Windows 7 and installed Windows 8 and am these problems persist. I have not upgraded but formatted my C drive and installed a fresh new copy of windows 8... so I thnk it may be a problem of the SMP. Can he?

  Hi sunny

  It can or mentioned being SMPS... the reason is... you have already said that the computer or the monitor works fine in safe mode! But since his past even when you install Windows 8,
  To make troubleshooting a
  1. go to the Bios and reset all default by selecting the optimum setting in the bios... Given that your motherboard has got characteristic overclocking and selection of the IGD... let him get by default...  Start the computer and check if the monitor turns off always.
  2. If step 1 does not solve your problem... then go to the power option in the control panel and select your power setting of the high-performance system where you can set your monitor to never go to sleep.  See what's happening... If the monitor still going to sleep even after this setting... then you have a problem with drivers or the motherboard... try updating the drivers and see if that helps.
  3. If the update of drivers did not help... so the next option is to review your material... try to get a replacement screen and see if this could solve this problem... A things you can deduct that if this also fails, then the obvious reason is that your monitor is ok... and problem must be the motherboard.
  4. Firstly check the display port... does it feel loose?
  a. do you have this port pins come out?
  b. your motherboard has two power connections (EATXPWR 24-pin and a 4-pin ATX 12V... are both connected?
  c. your SMP should be at least 400W according to recommendations from the manufacturer to you. Check this box...
  d. then ofcourcse obviously... Reinstall the Rams and other external devices.
  Follow these steps and let me know your comments for each

• Satellite series A turn off for the game Command and Conquer 3

  Hi all

  This happened to me twice. While I was relax play skirmish Command and Conquer 3, computer laptop turns off suddenly. I was running an external power supply and the battery was full. What is even more strange, it was impossible to next turn to the until I removed the battery and plugged in.

  I bought this game around March and was able to beat the 3 campaigns without these attractions.
  I suspect that this may be caused by overheating, because after the laptop is pretty hot. What do you think? I bought it in January.

  In my Office I occasionally removed the fan and radiator vacuum, there accumulates a lot of dust sometimes. It is not easy in the case of laptops. Any suggestions? See you soon.

  Hello

  You should do a bios update, because I had a similar problem with my A100 and after updating the bios to the version the most recent (5.60) I had no problem more. Maybe it helps.
  The other thing is, if you have a ventilation system which is clobbed with dust, then you should take a container with compressed air (you can get it in every electronic market/store) and gently lead some air to breath through the ventilation holes. (like 2 seconds. Wait, then wait 2 seconds and so on; just make short sounds :))
  Then, ventilation must be clear.
  Otherwise bring your machine to a service partner for a checkup of material because some loose cables inside the machine could probably be a reason that the machine feeds not correctly on...

  Welcome them

• HP P1102 turns off after 4 hours since the last update of firmware - stop it turn off?

  I have updated the firmware and my printer drivers for the last realease (17/10/2012) on my P1102 printer. The printer now turns off completely after 4 hours. I changed the setting in the driver to "never turn off" but it makes no difference. It's a big problem that I use the PC connected to the printer via remote access and so I can print is no longer when I want to. How I either restore the firmware or stop the printer turn off please? Since the firmware update, I noticed also that when the printer goes to sleep the green light will blink each opten both before the firware update lights exploded when the printer has gone to bed. Can someone help please...

  Thanks in advance

  Hoddy

  Hi Hoddy,

  Follow the steps outlined in the document below. Let me know if this helps you?

  Auto shut-off delay time is too short