Satellite Pro L670-103 screen is dark - external monitor ok

Similar Questions

• Re: Satellite Pro L670-103 - not able to connect to the internet using LAN

  Hello

  I am unable to get my L670-103, in the case of Windows 7 Pro (x 64), to connect to the internet via the ethernet jack.

  I tried running the troubleshooter in windows and reinstall the driver ethernet with no luck.
  The computer used to work fine with the same network (I have no control on the network itself, as I'm on a University campus), and my other, much more old laptop (with XP), connects with no bother.

  I'm sure the question is focused on software that - I tried to go online on the same socket after booting from an Ubuntu live CD, and it worked fine.

  What can I do about it?

  Hello

  Can you confirm that the LAN driver was installed successfully?
  What is card LAN recognized correctly in Device Manager?

• Satellite Pro L450D - light ripple effect on external monitor

  I hope someone can help me. You just bought a new Pro L450D of Satellite and also bought a screen separate LCD (Viewsonic) to use with the laptop.

  When you use the lcd screen there are a slight ripple effect on the bottom when you look at the screen that is not pleasing to the eyes. This is not the screen that has a problem, as I have tried on other portable PCs and its fine. Have also tried another screen on the laptop and the same problem occurs. However, this problem does not the screen of the laptop itself.

  Anyone have an idea how I can solve this problem.

  Thank you

  Sam

  Hi Ndev,

  Have you tried another cable for your external monitor and what (cable) connection you use exactly?

  Are you running the factory settings or you have installed your own OS?

  First of all, I would recommend updating the display driver and BIOS. The two you can download on the Toshiba site.

• Satellite Pro A120 - lines running on the external monitor refresh

  OK I just want to know if anyone else has this problem if they fixed

  I connected an external monitor to an A120 you can see the lines of refreshing the screen running, I changed the screen and power cables to make sure it is properly grounded and drove up the refresh rate all the way, but it happens still I was wondering if anyone else has the problem, so I know I'm not nuts

  (Yes, I did an upgrade driver and I tried another monitor the only thing what is the laptop but I don't want to get engineers out if it's something I can solve)

  Hello

  Can you please test it on a few different monitors? Perhaps your external monitor is not one that suits more.

• Re: Satellite Pro L670-103 - sound

  Hi all

  If I plug in my speakers external in the headphone, they work well, if I remove the plug the sound comes from the laptops internal speakers for about 10 seconds before cutting. If I connect the external speakers, everything is ok, I then unplug them, the internal speakers work for about 10 seconds before cutting... ad infinitum

  any ideas anyone?

  Sam

  When you restart your laptop is then all is well again?

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• Satellite Pro L670 - 11 d is not an external keyboard

  My Satellite Pro L670 - 11 d is not an external keyboard (PS2 connected via a USB adapter). When connected, the keyboard lights blink once and that's it. The keys do nothing. This happens if the connection before or after the start. I use Windows XP. Any help is appreciated!

  Hello

  You need to update drivers chipset makers of these functions:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Choose your model and download, install it and restart

• New Satellite Pro L670 - 14 M turns on if the charger is plugged?

  Hi all

  New to the forum so grateful for any help on this matter.

  I bought a brand new laptop Satellite Pro L670 - 14 M last week. Now it works fine up until today. The last time that I used it while just running the battery was Monday night. I was working on the laptop, send email etc. today, and I decided to change rooms. For some reason, I still have to discover that I disconnected the charger from the wall (instead of simply unplug the charger from the laptop) so that it was plugged into the laptop and the laptop just turned off much to my shock. It was sparking that I saw the decision-making that I removed the CAP, but now the laptop lights not unless supply current is connected. If I unplug the charger, the computer does not illuminate.

  Now, my first thought is I (crossed beams) killed the battery, but the strange thing is, when the laptop is plugged in and turned on and I'm on my screen and I click on the battery icon in the taskbar it States 94% available (plugged in, load)

  While I wait for some answers I hope I shut down the laptop and leave the charger plugged in to see if the battery has loaded more than 94%

  Hello

  I think that the BIOS update would be worth a try in your case. Take a look at the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  But before you start the update: make sure that you are logged on as administrator and close all running programs. Unzip all files from zip archive first.
  After update successful BIOS load default settings in the BIOS.

  Are you using the original Toshiba battery and AC adapter or they are 3rd parties gone?

• Satellite Pro L670 - 11 d and Dynadock U10 problem re-docking station

  This my first post on this forum - I hope I have the right category.

  We have a user with a Satellite Pro L670 - 11 d attached to a port replicator Dynadock U10 USB.

  Everything seems fine, except when press us the disconnect button (or select eject Dock) the laptop leaves the great.
  However when we try to anchor (for example after a meeting of bureau) it does not recognize the usb connection and docking station won't. We usually have to restart at this point. We are attentive to reconnect to the same usb port.

  Has anyone seen this problem and know a fix?

  Thank you

  David

  Hello

  Have you noticed this problem only under this Dynadock U10 or perhaps with the external USB HDD too?
  In my opinion, it sounds a bit like the issue of the BONE and not like the Dynadock question.

  I would recommend this control by using a USB HDD.
  Connect the USB HDD to the USB port as well.
  Then, disconnect the USB HDD and unplug the laptop HARD drive. Reconnect the HARD drive and check if the HARD drive would be connected again.
  If the same thing would happen with HARD drive, you should check the USB port
  Maybe the chipset driver will need to be updated

  But if the HARD drive is raccorderaient ok and if the question does not seem to be using the HARD drive, then, it would be necessary to check the Dynadock maybe reinstall the Dynadock from the software again.

• Satellite Pro L670 - photo of autumn leaves displayed by webcam

  Satellite Pro L670.
  I am trying to use the built in camera for taking videos and still images.

  When I turn the camera the only image displayed, it's just a picture of the leaves fall.
  I can't get a picture that sees the carema to display.

  The camera works because I can use it for Skype and MSN.
  When I take a picture using the Control Panel, the only image taken is that of the leaves.

  The image is called a 'protection of screen '.

  Drag your mouse on your pop out where you choose to use your webcam, instead click the option at the bottom of the "Effect" in their 'net', click and click 'OFF' Tada!
  The now disappeared from your cam Image,

  Good luck!

• Satellite Pro L670 - size of the Excessive recovery partition

  Hello

  New to this forum I have just bought a new laptop of Toshiba Satellite Pro L670, is great so far, but I have a question I'd like to solve.

  It has a 500 GB hard drive, which will be more than enough for some time yet, but I'm not satisfied with the way it is partitioned, usable space is divided into 232 C: and 232 GB D: that has the data folder HDDRecovery on it. Now, I know that I can still use the partiition for data, but I prefer to keep all my files in one place and the usual locations of Windows on the C: drive.

  What is the best way to recover all my hard drive space, Windows allows me to shrink the D. partition, but cannot extend the C: partition into free space created as the recovery folder is in the way. Thought copy output folder then recreate a smaller partiiton D: but he did not like me trying to move the folder either!

  ID of burn recovery DVDs can I safely delete the D: partition? I prefer to keep the disk but with a bigger drive C: is the highest priority!

  Congratulations to all

  Steve

  Hi scoobasteve,

  > What is the best way to recover all my hard drive space
  There is no better way. There are many options for the creation of new partitions because some people prefer a single partition, other people using a lot of partitions.

  Don t worry folder HDDrecovery!

  For example, I installed all my programs/games on the first partition C: where I installed Windows as well. This partition uses 50% of HARD drive space.
  Then I have a second partition D: with HARD drive recovery record. He s using the other 50% and on that, I've stored my files like photos, videos, music, documents, etc. No program, but all other files.

  In my opinion that s ok because I have to run HARD drive recovery, only the C: partition is removed. My important files are still on the D: partition after recovery of HARD drive. In addition, each week, I create a backup of all files on D: partition wait folder of HARD disk recovery. That's why I use Acronis True Image, it records the image on an external DRIVE connected via USB drive.

  Then why delete disk HARD recovery file?
  Of course, you can remove it but create the before recovery disk! After you delete the folder, you are not able to do this more!

• 8 GB ddr3 on Satellite Pro L670 - 14L installation is possible?

  I would buy this laptop and I need to know something about its capabiliities of upgrade:
  -Can I replace the module 2 GB with 2 modules of 4 GB (8 GB total)
  -can I mount a second HD on this model?

  > - Can I replace the module 2 GB with 2 modules of 4 GB (8 GB total)

  After it's specifications:

  http://UK.computers.Toshiba-Europe.com/innovation/product/Satellite-Pro-L670-14L/1086890/toshibaShop/true/

  standard: 2 048 MB
  maximum extension: 8 192 MB
  technology: DDR3 RAM (1 066 MHz)

  You can spend up to 8 GB DDR3

  > - can I mount a second HD on this model?

  I'm not familiar with this model and do not know if there is an available slot. but you can use the external hard drive.

• Latest version of BIOS of the need for my Satellite Pro L670 - 1 L 0

  Hello

  I have a problem with the keyboard on my satellite pro L670 - 1 L 0.

  where can I find the latest version of the bios/firmware of this laptop?

  THX.

  A.

  Hello

  Latest version of the BIOS of your computer, you can find on the Toshiba support page - http://www.toshiba.eu/innovation/download_bios.jsp

  By the way: what kind of issues you have with the keyboard?

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Satellite Pro L670 - 1 M 3 - Chipset in this model

  Hello!

  I'm looking for help: who knows, what Intel chipset is in the Satellite Pro L670 - 1 M 3? It's the Intel H55 Mobile?
  If so - is that this chipset in all series production of the 1 M 3?

  I couldn't find this information on the Toshiba site.

  Thx a lot

  wonderpro

  Hey Buddy,

  I agree with the user MannerhagenVPO. The chipset of this model is Intel HM55 Mobile and all the Satellite Pro L670 - 1 M 3 models are equipped with this chipset.

  I hope that your question is answered now :)