Satellite Pro L670-16Z keyboard problem

TOSHIBA - Satellite Pro L670 - 16Z Intel i3 - 350 M RAM 4GB 17 "LED Windows 7 Professional / XP.
Next week I'll buy this model. I read some reviews on a decline in the middle of the keyboard.

"The one on our review sample fell a lot in the middle. As a result, we felt more like we were tapping on a bouncy castle. »

Read more: http://reviews.cnet.co.uk/laptops/toshiba-satellite-l670-review-50000488/#ixzz15FI0QhuI

I wanted to know from someone who has this model, if the problem is present.
Thank you

Hello

I put t have it, but best friend of my girlfriend had it and I installed and configured this machine so I got it in my hands and I must say that the keyboard is OK, and I didn't notice anything unusual.

Also, talk with your local dealer to return option. In my country I have 14 days to return the product if I don't like it. Maybe you have the same option in your country. Check it out.

In any case, I must also say that the Satellite Pro L670 is good laptop for all activities of the day. Nice design, very good material and enough power/performance. With other words: nice piece of hardware for the money.

Tags: Toshiba

Similar Questions

  • Satellite Pro L670 - 16Z BSOD after start and an external monitor

    Hello!

    I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
    Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
    Systems running Windows XP. I have this with both of them with different external monitors.
    I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

    Any suggestions?

    Concerning

    Stephan

    Are you using the original recovery image Toshiba WXP?
    Can you start Windows XP Home edition in safe mode?

    The port on which you are using to connect the external monitor?

  • Satellite Pro L670-16Z - XP installation after using Windows 7?

    Regards to all forums. I'm new here.

    Next week I should get a new pc, * Satellite Pro L670-16Z *. I have a few questions.

    * 1. * If, during some weeks, use my computer with Windows 7, after that I can downgrade to Windows XP?

    * 2 if I downgrade to XP, you can reinstall Windows 7 new?
    Thank you for the replay.

    If you want to reinstall Windows 7, you must first create the recovery disk. There should be an icon on the desktop. Use good quality DVD discs since those of poor quality can cause errors during recovery.

    To install XP, you buy XP in a store (which may be difficult).

    You can run XP in Windows 7 Professional or higher using a Virtual Machine.
    http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  • Satellite Pro A40-240, keyboard problems

    Hello!

    I had problems with the keyboard of my Toshiba Satellite Pro A40-240... "Sometimes the"<" key="" print="" a="" lot="" of="" characters,="" and="" sometimes="" the="" "sticky="" keys"="" are="" authomatically="">

    This problem starts without any previous sign. A suggestion?

    Thank you!

    Check your keyboard settings?

  • On Satellite Pro L870-173 keyboard problem

    Hi, I am the owner of a laptop from the Satellite Pro L870-173.
    By writing an e-mail the keyboard functions has changed.
    Some keys have a different meaning, examples

    Space lab = o
    4 = o v4v4
    c = the optioo for a secodon display

    What can I do?
    Is originally a default keyboard?
    Do anyone have an idea?

    The system is a 6v4 - bit win8o
    The keyboard settings is always the same: German language

    Thank you very much!

    > Do someone has an idea?
    Yes, I have an idea.

    > Is originally a default keyboard?
    I m afraid, Yes.

    You can confirm my idea connection external USB keyboard to the laptop.
    In case your external keyboard would work correctly, the problem is definitely related to the internal keyboard.

  • Satellite Pro L670-16Z and WinXP - keyboard Fn + F8 does not work

    I installed Windows XP on this laptop. The keyboard * Fn + F8 * (control of the wireless switch) do not work. ?
    Any idea? Thank you

    Hey,.

    Have you tested other combination of FN keys or only FN + F8 does not work?

    If only the WLAN power switch doesn t work it could be linked to the WLAN driver is the WLAN card in Device Manager correctly or you see a yellow exclamation point?

    Official website of Toshiba, you can download your model and new WLAN driver for XP. In addition the common Modules, you can also download that you need for the FN keys:
    http://EU.computers.Toshiba-Europe.com

  • Satellite Pro C660-1LR keyboard problem, there type y7 and 7 types y7.

    I plugged a USB keyboard and it works well. That means it's the internal keyboard hardware that is defective? How long is the warranty on these laptops?
    I removed the Y key, and there is nothing stuck in the origin of the problem.

    Post edited by: howieleem

    > I plugged a USB keyboard and it works well. That means it's the internal keyboard hardware that is defective?

    Yes, exactly
    You need new keyboard
    Ask Toshiba authorized service partner for a keyboard that you can also order a 2nd common hand keyboard from ebay or some online dealers

    standard warranty is valid for 12 months long...

  • Satellite Pro L670 - 14 p - problem with 8 GB of RAM

    Hi all

    Recently, I bought 8 GB of ram for my toshiba.

    its 2 into 4 gb sticks, "integral" IN3V4GNYBGI, DDR3 1066 mhz SODIMM.

    BIOS is seeing all this ram properly, but after the opportunity to get into the bios, the laptop is freezing.

    I have black screen then and '_' cursor flashing at the top left.

    I tried to change the positions of ram, but it did not help.
    I also tried with my old sticks and thought that it starts with 2 GB old stick in main location, but it does not start with the 4 GB stick in the main location.

    I have updated the bios of 02.2011, both sticks have been verified with memtest and they seem well.

    any1 have any ideas how to turn on the 2 x 4 GB sticks?

    Thanks for all answers

    Greetings
    Slav

    In my opinion, the problem is related to the problems of comatibilty between the RAM modules and the laptop.
    You should test the other modules from different manufacturers
    The Kingston modules should work fine, I upgraded two of my books with Kingston modules and it worked perfectly

    I also read here in the forum that some users had problems with the RAM upgrade and after switching to Kingston problems went

  • Satellite Pro L670 - 11 d and Dynadock U10 problem re-docking station

    This my first post on this forum - I hope I have the right category.

    We have a user with a Satellite Pro L670 - 11 d attached to a port replicator Dynadock U10 USB.

    Everything seems fine, except when press us the disconnect button (or select eject Dock) the laptop leaves the great.
    However when we try to anchor (for example after a meeting of bureau) it does not recognize the usb connection and docking station won't. We usually have to restart at this point. We are attentive to reconnect to the same usb port.

    Has anyone seen this problem and know a fix?

    Thank you

    David

    Hello

    Have you noticed this problem only under this Dynadock U10 or perhaps with the external USB HDD too?
    In my opinion, it sounds a bit like the issue of the BONE and not like the Dynadock question.

    I would recommend this control by using a USB HDD.
    Connect the USB HDD to the USB port as well.
    Then, disconnect the USB HDD and unplug the laptop HARD drive. Reconnect the HARD drive and check if the HARD drive would be connected again.
    If the same thing would happen with HARD drive, you should check the USB port
    Maybe the chipset driver will need to be updated

    But if the HARD drive is raccorderaient ok and if the question does not seem to be using the HARD drive, then, it would be necessary to check the Dynadock maybe reinstall the Dynadock from the software again.

  • Satellite Pro L670-18F - plasticky rattle on the lower part of the keyboard

    Brand new L670-18F a plasticky rattle on the bottom of the keyboard and the whole area of the keyboard.

    Anyone experienced this?

    Hello

    I m not Satellite Pro L670 owner but in my opinion it of difficult to discuss these issues without seeing and hear it.

    From my own experience, I can say that I have two laptops Toshiba and I can t view all rattle plastic. Everything is ok, the quality is perfect.

    If you think that it s something wrong, you should get in contact with a service provider authorized in your country. Guys can take a look at your notebook and tell you if it of ok or not. :)

  • Satellite Pro L670 - 11 d is not an external keyboard

    My Satellite Pro L670 - 11 d is not an external keyboard (PS2 connected via a USB adapter). When connected, the keyboard lights blink once and that's it. The keys do nothing. This happens if the connection before or after the start. I use Windows XP. Any help is appreciated!

    Hello

    You need to update drivers chipset makers of these functions:

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    Choose your model and download, install it and restart

  • Latest version of BIOS of the need for my Satellite Pro L670 - 1 L 0

    Hello

    I have a problem with the keyboard on my satellite pro L670 - 1 L 0.

    where can I find the latest version of the bios/firmware of this laptop?

    THX.

    A.

    Hello

    Latest version of the BIOS of your computer, you can find on the Toshiba support page - http://www.toshiba.eu/innovation/download_bios.jsp

    By the way: what kind of issues you have with the keyboard?

  • Satellite Pro L670-103 screen is dark - external monitor ok

    Hello

    Screen goes black in my Satellite Pro L670-103 while playing games. It is not completely off, but very very dark.
    System is activated and works while its happening. No flickering, changing colors.
    On the external monitor (TV via HDMI) everything works fine (so I guess that the GPU is very well).

    The beginning I had to restart the laptop and screen was once again but now it does not work and I have to wait a few more hours a sound goes on again just by itself (im leaving laptop on).

    I only use the approved oryginal drivers.
    System Windows 7 pro 64
    I guessed it might be the display inverter, but someone from the point of laptop repair told me that because my screen is RUN there is no converter and problem is with the screen itself.

    I spent hours reading various forums and UPS has been my best guess.

    Post edited by: Cezar_1

    Hello

    I think that its problem of converter FL.
    The FL inverter controls the backlight of the internal display.
    I think I get m with my suggestions because the external monitor looks ok.
    So it may not be a driver issue not a GPU problem

    Get in touch with the service in your country then must check this part

  • Fan is always running on my Satellite Pro L670-17R

    Hi all

    First of all, I'm french, so excuse me for my poor English. I'll try to explain my problem. I've just bought a satellite Pro L670-17R, core i5 450, ati 5650.

    As I only work with the word or surf the web, fan runs always every two minutes. I checked the temperature of the processor (with pc health monitor from toshiba), and it gives me 37 ° C which seem quite normal.
    I'm trying to change an option in the Panel, but without success, anything in the bios, to set the speed of the fan over the CPU usage.

    If you have any ideas or suggestions, it would be great.

    Next

    France Fabrice

    If you want to reduce the speed of the fan cooling use the balanced power plan and go into the advanced power settings.
    Energy saving of Toshiba you will find the option called cooling method. Assign the optimised battery.
    Cooling fan should run on low speed.

    Check it out.

  • Satellite Pro L670-18F - pilots missing after updating BIOS

    I have a Satellite Pro L670-18F and I recently updated the BIOS to version 1.5, recommended by the site, but now my internet speed is VERY slow and I have some devices in the Device Manager without drivers related to the bios (from Googling) and so I realized that the bios has been a problem.

    Does anyone know this laptop came with to downgrade the BIOS version? Also, if I reinstall windows will I receive a new bios version or will it would not affected?

    Hey,.

    Did you download and install the correct version of the BIOS of your laptop? Satellite Pro L670-18F belongs to the series of PSK3FE AFAIK, so have you chosen BIOS for this series of model?

    In addition I recommend you load the default settings in the BIOS. Just press F9 key if you are in the BIOS Setup.

    If you reinstall Windows, the BIOS will not be affected. BIOS and Windows are different, you will always have the latest version of the even you change your operating system.

Maybe you are looking for

  • Re: How to get the Tempo to work properly?

    Hello I have problems with the service of Tempo. I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site

  • Machine support and Java applet

    Is it the Firefox Mobile for Android support the Java machine to run the Java applet? For example, a webmail system using the Java applet. I found a lot of mobile browser does not support. Firefox Mobile is designed to be the same as Firefox Desktop.

  • Network printer a M175nw in two areas

    I just bought a M175nw laserjet and must he have connect to the two areas at a time.  They told me that it was possible, but can not find all the Setup instructions for this requirement. Anyone have all the instructions or how to configure the printe

  • Upgrade Guide vWorkspace 8.0

    Hi all Is there a guide for this? I can only find information on the upgrade 7.0 and 7.2? Thank you

  • Dell OptiPlex 380 TM HELP!

    My OptiPlex has lost its graphics IE no signal to monitor just before that happens, I got the color of the lines ect but it was brief so he's just went I had a Radion HD5450 mounted but even when removed still no signal on the screen the generic grap