Satellite Pro L670 - connection via HDMI to TV Toshiba

Similar Questions

• Satellite A100-062 - connect via HDMI LCD monitor

  Hello

  I wish I could connect my laptop Satellite A100-062 to LCD TV.
  The TV has a HDMI input. I understand that I could get a cable to connect DVI to HDMI, but I'm not sure I'd be able to output/DVI laptop computer.

  Is it possible to connect the laptop to a TV LCD with HDMI? If so, how would that be better achieved? Do I need a series of cables converters?

  Any comments on this would be greatly appreciated.
  Concerning
  Ben milk

  Hello

  As much as I know this laptop can't stand out DVI, or HDMI port.
  It supports only s-video and RGB (monitor) output port.

  My Satellite phone supports a HDMI port output. The external monitor supports DVI and HDMI.
  I connected my laptop via a DVI-HDMI laptop/DVI HDMI cable on my monitor.

  I don't know if there is a RGB to HDMI adapter I doubt m
  But I found another solution;
  You can use a cable S-video to SCART and was able to connect the converter as Lindy - SCART to HDMI between laptop and TV or LCD display.
  This converter is not cheap, but it s about 120Euros

• No sound on the TV LCD Satellite A200 is connected via HDMI

  The problen is: I connect to laptop (A200) for LCD TV (Philips) by HDMI. The video is OK, but his stay on laptop not LCD TV.

  Maybe the problem is THAT HDMI 1.2 does support audio and video not together? Only 1.3?

  Sorry for my English

  Hello Maria

  I have connected successfully Satellite A200 to my 32 LCD TV with success. Be sure to use high quality cable. As Gantz has already written sound can be enabled in the sound properties. When the cable is connected on the reading tab, enable HDMI output.

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Satellite C660-1RQ cannot connect via HDMI to the NEC projector

  Hello.

  I have laptop Toshiba C660-1RQ.
  It can not connect via HDMI to the NEC projector.
  I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58

  I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...

  And my HDMI works with monitors, TV (but sometimes!), etc.

  I don't know what to do...

  > And my HDMI works with monitors, TV (but sometimes!), etc.

  If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.

  What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?

  The use of Fn + F5 keys can toggle between internal and external display.

• Satellite Pro L630 connect to TV Toshiba

  I'm trying to connect my laptop to my TV. The specifications are:

  Laptop: Toshiba Satellite Pro L630 - 134.
  TV: Toshiba Regza CT-42RL853.

  I am trying to achieve connectivity via HDMI. Once I have connected the TV to the laptop, I try to switch the display. However, the laptop does not see the TV (made to each function F5 or via Control Panel). The other view is not be found even when I select detect.

  Does anyone have any ideas?

  Things I've tried:
  Looked in the BIOS but no parameters to allow another external screen.
  Tried to look in the settings of the TV to see if there are access port to allow/disallow settings but nothing appears.
  Shot to the top of Toshiba Media Controller on laptop. He seems to see the tv (screen name on the right side). However no image displayed on the tv.

  Someone else has solved this problem?

  Thanks in advance.

  Sean

  Hello Sean

  To be honest after reading your ad, I can't say with certainty what can be the problem. The fact is that, in most cases, it takes work and if there is not a small problem.

  In the past, I have connected several laptops from Toshiba on my BRAVIA LCD TV and everything went well every time. On television, you must enable HDMI port you use. If you have more HDMI ports do not forget the right turned to television.

  On the other hand, if your TV is recognized by your laptop when you press FN + F5, you should see several options there. You see it or just one option (LCD)?
  Are you using the original pre-installed OS that you got with your laptop (original drivers)?
  Have you tried using different HDMI cables?

• Satellite Pro L670-103 screen is dark - external monitor ok

  Hello

  Screen goes black in my Satellite Pro L670-103 while playing games. It is not completely off, but very very dark.
  System is activated and works while its happening. No flickering, changing colors.
  On the external monitor (TV via HDMI) everything works fine (so I guess that the GPU is very well).

  The beginning I had to restart the laptop and screen was once again but now it does not work and I have to wait a few more hours a sound goes on again just by itself (im leaving laptop on).

  I only use the approved oryginal drivers.
  System Windows 7 pro 64
  I guessed it might be the display inverter, but someone from the point of laptop repair told me that because my screen is RUN there is no converter and problem is with the screen itself.

  I spent hours reading various forums and UPS has been my best guess.

  Post edited by: Cezar_1

  Hello

  I think that its problem of converter FL.
  The FL inverter controls the backlight of the internal display.
  I think I get m with my suggestions because the external monitor looks ok.
  So it may not be a driver issue not a GPU problem

  Get in touch with the service in your country then must check this part

• Satellite Pro L670 - 11 d is not an external keyboard

  My Satellite Pro L670 - 11 d is not an external keyboard (PS2 connected via a USB adapter). When connected, the keyboard lights blink once and that's it. The keys do nothing. This happens if the connection before or after the start. I use Windows XP. Any help is appreciated!

  Hello

  You need to update drivers chipset makers of these functions:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Choose your model and download, install it and restart

• Satellite Pro L670 - size of the Excessive recovery partition

  Hello

  New to this forum I have just bought a new laptop of Toshiba Satellite Pro L670, is great so far, but I have a question I'd like to solve.

  It has a 500 GB hard drive, which will be more than enough for some time yet, but I'm not satisfied with the way it is partitioned, usable space is divided into 232 C: and 232 GB D: that has the data folder HDDRecovery on it. Now, I know that I can still use the partiition for data, but I prefer to keep all my files in one place and the usual locations of Windows on the C: drive.

  What is the best way to recover all my hard drive space, Windows allows me to shrink the D. partition, but cannot extend the C: partition into free space created as the recovery folder is in the way. Thought copy output folder then recreate a smaller partiiton D: but he did not like me trying to move the folder either!

  ID of burn recovery DVDs can I safely delete the D: partition? I prefer to keep the disk but with a bigger drive C: is the highest priority!

  Congratulations to all

  Steve

  Hi scoobasteve,

  > What is the best way to recover all my hard drive space
  There is no better way. There are many options for the creation of new partitions because some people prefer a single partition, other people using a lot of partitions.

  Don t worry folder HDDrecovery!

  For example, I installed all my programs/games on the first partition C: where I installed Windows as well. This partition uses 50% of HARD drive space.
  Then I have a second partition D: with HARD drive recovery record. He s using the other 50% and on that, I've stored my files like photos, videos, music, documents, etc. No program, but all other files.

  In my opinion that s ok because I have to run HARD drive recovery, only the C: partition is removed. My important files are still on the D: partition after recovery of HARD drive. In addition, each week, I create a backup of all files on D: partition wait folder of HARD disk recovery. That's why I use Acronis True Image, it records the image on an external DRIVE connected via USB drive.

  Then why delete disk HARD recovery file?
  Of course, you can remove it but create the before recovery disk! After you delete the folder, you are not able to do this more!

• New Satellite Pro L670 - 14 M turns on if the charger is plugged?

  Hi all

  New to the forum so grateful for any help on this matter.

  I bought a brand new laptop Satellite Pro L670 - 14 M last week. Now it works fine up until today. The last time that I used it while just running the battery was Monday night. I was working on the laptop, send email etc. today, and I decided to change rooms. For some reason, I still have to discover that I disconnected the charger from the wall (instead of simply unplug the charger from the laptop) so that it was plugged into the laptop and the laptop just turned off much to my shock. It was sparking that I saw the decision-making that I removed the CAP, but now the laptop lights not unless supply current is connected. If I unplug the charger, the computer does not illuminate.

  Now, my first thought is I (crossed beams) killed the battery, but the strange thing is, when the laptop is plugged in and turned on and I'm on my screen and I click on the battery icon in the taskbar it States 94% available (plugged in, load)

  While I wait for some answers I hope I shut down the laptop and leave the charger plugged in to see if the battery has loaded more than 94%

  Hello

  I think that the BIOS update would be worth a try in your case. Take a look at the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  But before you start the update: make sure that you are logged on as administrator and close all running programs. Unzip all files from zip archive first.
  After update successful BIOS load default settings in the BIOS.

  Are you using the original Toshiba battery and AC adapter or they are 3rd parties gone?

• Satellite Pro L670 - 11 d and Dynadock U10 problem re-docking station

  This my first post on this forum - I hope I have the right category.

  We have a user with a Satellite Pro L670 - 11 d attached to a port replicator Dynadock U10 USB.

  Everything seems fine, except when press us the disconnect button (or select eject Dock) the laptop leaves the great.
  However when we try to anchor (for example after a meeting of bureau) it does not recognize the usb connection and docking station won't. We usually have to restart at this point. We are attentive to reconnect to the same usb port.

  Has anyone seen this problem and know a fix?

  Thank you

  David

  Hello

  Have you noticed this problem only under this Dynadock U10 or perhaps with the external USB HDD too?
  In my opinion, it sounds a bit like the issue of the BONE and not like the Dynadock question.

  I would recommend this control by using a USB HDD.
  Connect the USB HDD to the USB port as well.
  Then, disconnect the USB HDD and unplug the laptop HARD drive. Reconnect the HARD drive and check if the HARD drive would be connected again.
  If the same thing would happen with HARD drive, you should check the USB port
  Maybe the chipset driver will need to be updated

  But if the HARD drive is raccorderaient ok and if the question does not seem to be using the HARD drive, then, it would be necessary to check the Dynadock maybe reinstall the Dynadock from the software again.

• WiFi for retired on Satellite Pro L670 - 11 d

  My Satellite Pro L670 - 11(d) does not connect to internet (Internet Explorer) wireless despite a good connection to the router. Router works wirelessly with other laptops and it connected with a cable. It has been lowered to Windows XP and downloaded wireless network adapter is Broadcom. Any ideas/suggestions?

  Is the card properly installed wireless (Device Manager)?
  You can activate using the FN + F8 key combination?
  Have you checked all the WLAN settings?

  What did you already get this working correctly?

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• Satellite Pro L670 - 14 M and SATA 6 GB/S Support

  Hello

  I recently bought an SSD (Crucial M4) for my Toshiba Satellite Pro L670 - 14M. He behaves well and certainly improves performance. However, when I test my SSD benchmarks, it reaches only about 230 - 260 MB/s reading speeds on sequential when it needs to get up to 500 MB/s as advertised.

  I'm assuming it's because my SSD is running via SATA 3 gb/s, so I ask, my laptop does support SATA 6 Gbps? If not, this isn't a big disappointment, although it would be great to have up to 500 MB/s sequential read speeds for this performance gain.

  Someone can confirm on the question of whether my laptop (Satellite Pro L670 - 14M) supports SATA 6 Gbit/s or not?

  Hello

  The laptop is equipped with a Mobile Intel HM55 Express Chipset and the Intel Core i3 - 330 M processor.

  That's why the SATA II controller agreed that 3 Gbps

  Welcome them

• Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

  Hello

  Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

  I have a Toshiba Satellite Pro L670.

  Even when the sound in Windows is turned off the laptop do a annoying sound.

  Thank you!

  Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

  Do you really want to work until the battery is completely discharged?

  Anyway, AFAIK this notification level BIOS cannot be disabled.
  Let's see if someone else is better informed than me.