Satellite Pro L770 - 12 p - Wake-up on LAN is not possible?
I try to send a wake up message to LAN (WOL) on my laptop to propel to the top.
I failed to make it work.
But I do not see a strange thing happening: when I send a magic packet WOL while my laptop is running, the laptop restarts automatically after closing down.
It seems that the Magic Packet is stored somewhere (perhaps in the NIC?) and is activated once the cell phone is off. I think a magic packet must be ignored when a machine has already begun and not be recorded and executed after the PC is turned off again.
That being said, I did a test with another PC; I am able to send a magic packet via my business network. So the problem isn't somewhere else. But the BIOS of my Toshiba laptop does not pick up when the machine is off. Only when it is already running.
Is this a bug and this bug can be resolved?
PS I have the latest version of the BIOS (v2.30) and I activated the Wake Up on LAN in the BIOS.
Post edited by: avanzwol
According to the Toshiba driver page, the last BIOS update was 09/03/12 and I doubt that this new version of BIOS which will be released in the future. The Satellite Pro L770 series is already discontinued.
However, as far as I know the reactivation of the LAN option can be found in the properties of the LAN card.
Go to Device Manager-> LAN card-> properties-> Advanced tab
Here, you should check if the WOL is enabled.
By the way: the network driver seems to be Realtek. I recommend you update the driver of network directly from the page of the Realtek driver. I know that WOL is controlled at the level of the BIOS, but I think the update is worth a try.
Satellite Pro L770 does not start after flashing the BIOS to version 1.3 and install the latest version of Toshiba Service station.
According to the repair of the Windows system, the c:\windows\system32\drivers\tvalz_o.sys is damaged.
Where can I find a new driver for tvalz_o.sys intact?
I tried to repair using repair windows system, but failed.
The autoinstall tool would provide a solution for my problem?
I think that the TVALZ.sys file is part of the Toshiba value added package.
This package is released for Win 7 as well regarding the old Win Vista.
I think you should try to reinstall this package
You will find this software on the Toshiba UE driver page.
My computer laptop ist a Satellite Pro L770-144 and the ist IO 8 Pro 64-bit Windows.
The SD Card Reader recognize the cards. I had installed the controller with the 6.1.7600.30126 Version Realtek card reader a Windows 8.
But the cards are not recognized.
In Windows 7 it? works.
Does anyone have an idea?
Greetings and thanks
Card reader is properly recognized in Device Manager?
If it is not recognized, then you used a bad driver.
If its recognized, the driver has been installed correctly and there is another reason why SD cards cannot be used.
As far as I know the Satellite Pro L770 card reader manages different types of cards with different sizes.
SD: 8 MB - 2 GB
SDHC: 4GB - 32 GB
SDXC: 64 GB
Memory stick: 128MB - 256 MB
Memory Stick Pro: 512 MB - 2 GB
xD Card: No.
Mini SD: 8MB - 2 GB
Micro SD: 8MB - 2 GB
As you can see the compatible SD card: 8 MB 2 GB
It seems more large SD cards only are NOT supported.
I have a portable Satellite Pro L770 running Windows 7. My problem is that when my mobile broadband is de-energized my mouse freezes and I can only close by using the "stop" key as CTRL/ALT/DEL will not work in closing the program.
Any ideas anyone?
But if you n t mobile use in wide band, everything is OK, right?
Do you use the touch pad or external mouse?
I have a Satellite Pro L770 - 14H and you want to use a Bluetooth mouse.
With the 'FN' and F8 key I am capable of coding between WLAN and Bluetooth, but it is not possibel to have both at the same time.
My question is: How can I have WLAN and Bluetooth at the same time?
To use a Bluetooth mouse with WLAN connection.
Thank you very much
Using Win 8.1?
Usually you could turn on and off Bluetooth in Win 8.1
Settings PC-> PC &-> of Bluetooth devices
There, you can move the cursor to BT for THE position.
I bought the laptop Satellite Pro L770 - 14N PSK3TE. I installed a clean version of windows 7 ultimate, but I can't find any drivers for this model.
For example,--> on page dowbload toshiba, is the required WLAN driver not in the download section.
I have dl the driver from Atheros page.
Find all the drivers, but we're missing in Device Manager.
Is a driver package available?
The Toshiba European driver page seems to provide all Win 7 64 bits of the Satellite PSK3TE L770 Pro series drivers.
The WLan drivers can be downloaded here:
This is the official Portal of Toshiba WLan and there you can also find Atheros Wlan driver.
I have a portable Satellite Pro L770-11F recently delivered to me in the context of an insurance claim. It has an AR9002WB - 1NG Wireless Atheros adapt 7 is running Windows 7 Pro 64 bit.
The problem that I am facing is when I download a file from the internet, it stops at random points & is unable to complete the download.
I can't tell when it happens or how it goes as nothing comes on the screen to tell me any problem. Sometimes I find that even if the PC is always connected to the router (D - Link DIR-615 & only 6 feet from the PC) the map only shows theres no connection to internet even if my Xbox is connected & my phone connects.
What makes it more rare is that if I connect to the router via an ethernet cable it never is de-energized & download the files without any problems
The files I download are various sizes of 350 MB to 3 GB, but it seems to do more on files larger than 500 MB so im thinking it's a matter of time/timer or a problem of size of file (wireless only, not connected by cable)
I had a laptop before it & it worked fine & I have never experienced this problem never
I changed the power management settings in the option ncpa.cpl & bang as far as I can tell that the drivers are up to date. I'm sure it's a matter of PC and not my internet & hopefully this week I can you confirm that by connecting to an internet friends & see if the same thing happens.
Any help would be greatly appreciated I have about 14 days left before I can send it to the supplier for an Exchange if it's a hardware problem.
Thank you very much
You said that the Wlan driver is updated, but I recommend you also check Toshiba Wlan portal and compare Wlan driver versions.
Here you can find the latest version of the driver.
You should also check the Microsoft power management settings.
There is an option for the WLan to save the power of the dough.
I recommend to disable this option for better performance.
Last but not least, you can check and play with the options that are in
-> Wlan card device manager-> properties-> Advanced tab
Good luck, hope this can be a little help
I recently rebuilt a Toshiba Satellite Pro L770-149 with windows 7 64 bit, when I installed first the operating system, all the drivers were missing so I installed all of the correct drivers and had run as it was before. Form Apart wireless connectivity,
It can connect through the ethernet cable and wireless (Fn + F8) is enabled.
Device Manager, it shows that all the drivers are correct and functional.
The icon in the taskbar just like a Red Cross, unless I connect the etheret cable.
Thanks in advance for any help
I think that support for laptop AR9285 WLan Atheros 802.11(b/g/n chip).
Have you seen the Atheros Wlan card in Device Manager?
If so, the WiFi card driver is correctly installed and if you have enabled the wireless network adapter using the FN + F8, then you should be able to configure the WiFi network.
To do this, you must go to control panel-> Network & Sharing Center-> (left) choose manage wireless networks
Now choose Add-> manually create a network profile
Here, you can configure the WiFi using the SSID network and other options needed.
Yesterday I received my new toshiba, and since then, I can't connect to any wifi network. My model is the Satellite Pro L770. So I can find many networks, but when I try to connect to one of them, the connection fails:
-My home network, which is of WPA/TKIP. I enter the password, and after several seconds, I have an error reported, with very little information about the causes.
-A public network (free, a french access provider), which should actually connect and redirect me to an authentication page. But in this case, I have limited access and if I try to connect to google, I have a DNS problem, so I can't use public network too. Here, I get an IP address, but no gateway, it's maybe normal that I'm not sure.
I must say that I have an Android phone with which I can connect to my own wifi. I tried to unplug, in order to avoid any conflict of IP, but the result is the same. My machines are ready DHCP, and my router has active DHCP mode.
Any help would be much appreciated.
Have you tried updating the driver WLAN and wireless network card appear correctly in Device Manager? You can download the latest WLAN driver on Toshiba WLAN official Portal:
Satellite L770 is brand new model mobile phone, so there is not a lot of discussion about it here in the forum. What you can also do is disabling feature of wireless network adapter in the power management Windows for each power of energy saving profile.
I hope that helps! :)
I have a Toshiba Satellite Pro T130 running Windows 7 Professional 64 bit.
After installing the Wireless Update September 29, such Manager recommended by Tempro, I'm problems with an awakening of the mode standby. Most of the time my laptop just don't wake up more and all I can do is to the hard switch off and turn it back on. I tried to solve the problem by changing the configuration options of the advanced sleep mode, and it seemed to work for a while, and problems to restart again.
Please help me with this issue, it is terribly annoying to have to turn off and turn on again everytime my laptop goes into mode 'sleep', not to mention the fact that I have to take care of not to let something unregistered, to avoid losing data.
Thanks in advance.
You have already started a thread on the same topic here:
Please follow the first thread to prevent certain misunderstandings
Often, I carry my laptop from one workplace to another.
Usually, put mode 'sleep', unplug the USB mouse and throw it in the bag.
However, whenever I unplug the USB mouse - laptop wakes up and I have to put back to sleep.
It's embarrassing. Is it possible to set up portable _not_ wake on USB activity?
I found no option in Vista power settings, or in the BIOS.
My BIOS is up-to-date (just updated, but did not help).
I use Windows Vista Business on Toshiba Satellite Pro P300 - 1 CG.
> Usually put in mode 'sleep', unplug the USB mouse and throw it in the bag.
Why you n t disconnect the mouse USB first and then put the laptop mode ensures?
That would solve your problem ;)
To my knowledge, the BIOS provides only the options: wake on LAN, wake-up keyboard.
There is no options for Wake up on USB and so cannot change these settings...
See you soon
just got my new laptop Toshiba (see subject). Unfortunately, I had a big problem with the W - Lan laptop speed.
Compared to my old laptop (satellite Pro A120, with a chip of WLAN Intel 3945) the new laptop (with a chip Atheros AR9281) scores only about 10% of the possible Internetspeed (approximately 1.5mbit compared to 0.1mbit!).
I am running Windows XP Service Pack 3 and tried to install the latest drivers for the card Atheros (126.96.36.199), newest Bios Version (version 2.50) and tried a few things on the forum (like disabling the option 'save energy' in the advanced driver options.) But speed has not improved at all and now I'm all ideas.
I'd appreciate it if someone could help me with my problem. Many thanks in advance,
As far as I know the standard WLan card Atheros AR5BXB91 supports the 802.11bgn WLan.
Check what WLan standard A, B, G or N to have been chosen in the
* Device Manager-> WLan card properties-> Advanced tab * and set it up again.
I have a toshiba satellite pro A100-psaase!
I could not find this model on the toshiba site, so I chose the A100-psaas software.
The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.
I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.
My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.
The funny thing is that I have internet and all.
I can't find a solution to these two problems
You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.
The LAN drivers are also published on the page! There are 2 different versions. Try them both!
The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!
Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
Close for any help.
It's a scream! :_| : O
This looks like a damage ROM module!
How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.
I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.
I think the best way is to ask the Toshiba service partner in your country.
I think they'll give you more details on the handling of the Fryer
I own a Satellite Pro L40 - 17F (PSL4BE-00R005EN).
I've been running the system on the current for a while now.
I decided to remove the battery to avoid damage.
Last night, I accidentally pulled the addapter at the back of the laptop. Since then; the machine won't start.
I noticed that the HARD drive was not making the usual noises. Then I realized was not the CPU fan is spinning.
Nothing appears on the screen, not even the start menu.
The only things that do not seem to work are the DVD player & power light!
I had the back of the machine off; I didn't see any obvious reason for the problem.
I'm looking for a second opinion on what is happening with it, and if it can be fixed without having to buy a new motherboard.
Thank you. Dan.
Hmm. possibly, there is nothing wrong with your motherboard.
Try this common workaround that has helped me in such cases.
Remove the battery and unplug the AC adapter. Leave the laptop for about 30 min and after this short break, put the battery in the laptop and connects to the AC adapter.
This short procedure helped me to sort a similar g and strange question.
I hope that you will succeed if you please post some results.
Maybe you are looking for
I'm not familiar with kit Apple having always used machines BACK, Windows, UNIX and Linux. Picked up this Mac second hand for watching old DVDs, but my husband connected to our router without having been asked by our security software and it immediat
I've updated my BIOS to version 6.00, but when restarting my Toshiba Satllite the BIOS shows me an error:"No TPM or TPM has problem.The ram test has passed but I can't get into Setup and BIOS freeze after the RAM testDo you understand what the proble
The idea is that if I had a framework for data collection. The thing is that I don't know beforehand how data are collected. That's why a vi opens dynamically to recover these data. When I use udp control in this vi recover data over a network, every
Whenever I try to download adobe reader software, it changes all my icons to adobe reader. Then, when I try to click on an icon (example: create the document or on the internet) I can not in any of my usual icons. ????
Why Vista WMP can't play .asf files and why MS has not created a fix for this?