Satellite Pro L850 1DR - problems with Windows 7 update KB2887069

Similar Questions

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Satellite Pro C850 - strange problem with LAN connection

  Hello world

  I just signed up on this forum because I hope you guys can help me with a really strange problem.

  I recently bought a Satellite Pro C850-1MX
  It came with Win8, but given that I don't really like Win8, I bought an additional Windows 7 Pro (64 bit) license and installed on the laptop.

  The problem I describe, also arrived on 8 to win, which makes it even more strange.

  As soon as I connect a cable to the RJ-45 port, Windows tells me, that the LAN connection is not connected.
  As soon as I unplug the cable, Windows starts looking for a network and actually found one!

  So, the only way to connect to my LAN cable is... I have activate the LAN connection, wait that it detects a network (without the cable connected!) and meanwhile to connect the cable to the network port.
  Now... If I disconnect the cable once again, Windows still shows its connected.

  I must say, that I am a Director of professional network for more than 10 years now, so I should know my systems, but this never happened to me before. Event log shows nothing, re-installing drivers did nothing either. IM quite confused here and I hope you guys can help me.

  Thanks for reading, and let me know if you need any additional info!

  Greetings from the Germany,
  Sandro

  Hello Sandro,

  To be honest I confused m.

  I would try to start talking about the drivers installed, since you changed the system for Win 7.
  All the network devices, such as card WLan and LAN card are properly recognized in Device Manager?

  As I m not wrong not the laptop was equipped with a network card Realtek-8111F (1000BASE-T/100Base-TX/10Base-T) and WLan RTL8723AE Realtek b/g/n card.
  If both should appear in the device properly Manager if you have installed the drivers correctly.

  2nd question:
  You said:
  > As soon as I unplug the cable, Windows starts looking for a network and actually found one!
  Are you sure that you speak of LAN and WLAN?
  For me it made no further since. If the network cable is unplugged, the notebook would connect to the WLan where WiFi is enabled.

• Satellite Pro C660-1J3 - problem with OpenGL / Edrawing

  Hello

  I hope you can help me with the following problem:

  I need to work a program that we OpenGL for drawing, but still the program does not work if it opens the drawings, the following information, always on the screen:

  "OpenGLView: EnableRenderContext failed" and the stop-work program.

  So I dry to update the driver grafik, but it does not work. I found a thread on this forum, but http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67241 his looks.

  I am at the part:

  Thank you, useful, but still having problems. I downloaded "Intel® Chipset Device Software (INF Update Utility) v 9.3.0.1019" and installed it the way you say, but the computer says I'm already under the latest version of the driver, which the computer is 8.15.10.2622. I'm running Windows 7 x 64 Home Premium. I can't forget the old version and use the new version.

  I don't really know the command SETUP-OVERALL, where I can find this command...

  Please help me, I need the program to work!

  Computer laptop-type: Satellite Pro C660 - 1J3 PSC0RE and I we Windows 7 Professional 64 bit

  Thank you alex
  PS Sorry for my English ;)

  Post edited by: alexk

  Hello

  I think the drawing application needs the graphics driver that supports OpenGL.
  To my knowledge, the driver of the Intel page should already contain the OpenGL.
  The Satellite supports graphics Intel HD (Intel HM55) so I think that you should use the driver from the Intel page, even if the update utility indicates that you are using the latest driver.

  I think that you need to uninstall the old driver through the Device Manager.
  In addition, check whether it should be uninstalled in the control panel-> software.

  Then download the latest driver for the Intel HM55 chipset, and install it via the Device Manager.
  You do this by using the Advanced installation procedure that will force windows to select the driver from the driver's record, that you have downloaded from the Intel page.

• Satellite Pro A300-2CW - necessary with Windows XP recovery disc

  I have a Toshiba Satellite Pro A300 2CW. I bought it with the software Windows XP (included in a CD), which worked perfectly for years. I reinstalled several times this year, but now the CD has deteriorated and it no longer works.

  The machine was originally WIndows Vista installed with the option to create DVD recovery and a recovery of HARD drive option, but I think that it is not possible for Windows XP.

  Do I have any options? Where could I buy the original Windows XP CD?

  Thank you

  Hello

  You can try to order it on https://backupmedia.toshiba.eu/landing.aspx
  Otherwise you can install the clean version of Windows XP Home edition. All drivers of Windows XP Home edition, utility tools announcement can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

  I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

  It may be possible that the upgrade to Windows 10 gets no success.

  I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-a-dual-boot-installation-of-Windows/d7ca80ce-96b0-4F0A-9A8E-4038ded592b2

  Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

  Part links can be resolved. By using the links to third party is at your own risk.

  You can also check:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• problems with windows 7 update again

  so after I have change my HARD drive to a new one because the old one broke, I reinstall the windows 7 and readers of motherboard, I so start to update and the download update of many fast but after that windows update some rare and on service pack 1, windows update to get caught in the search for updates for always.

  I KNOW that windows 7 really SEVERAL HOURS to update, but is already more than 48 hours stranded in the search for updates!

  I already try to download and install this update on the links manually

  https://www.Microsoft.com/pt-BR/Download/details.aspx?ID=46817

  http://www.catalog.update.Microsoft.com/search.aspx?q=3125574

  but they do not work, when I try to install I get a message saying that they can not be installed in my computer

  This is a list of the update I download realdy (in Portuguese, sorry, but you can see the KBnumbers)

  the last update has been updated windows agent 7.6.7600.320

  

  Windows 7 update problems? First read this.

  :)

• Satellite Pro L500-12F - problem with CD/DVD player and screen

  Hello...

  I have a few questions on my laptop...

  1. is it normal that the DVD rom on some DVD/CD it is very noisy and vibrates a lot, spesialy on older CD

  2. the lid of my laptop when I close its kinda not in harmony with the rest of the pc it is not fully aligned, but it's a little difficult to see wait when you look for it... but its good on and what is not lost or anything just not setting for the "body" of the laptop

  3. the cover still once, under the screen where the cover is mounted on the 'body' off the laptop so... It is not glued to the screen as the rest of the rolled edges it is right next to him that you can drag into it, so you can see the wires enter the screen etc.
  is this normal?

  -Thank you

  Hey Pedersen37,

  (1) maybe your old CD's doesn't work correctly. What happens if you try the same disks in another computer?

  Regarding your display/cover problem if you mean that you can see the cables that they go into the screen I can see it on my laptop. Normally, all the cables are invisible and under the plastic.
  He s strange to say something on the subject but maybe a lid plastic isn't installed correctly or a screw is missing

  If you think that something isn't normal, you should contact your authorized service provider. They can check the laptop.

• Problems with Windows Vista update error code I get is Code: 80096001

  Hi gang,.

  I need help I can get at this point. I am currently working on a machine to a customer who had the rootkit zero.access top. The machine works like a champ, now that it is all clean; but for some reason any Windows Vista refuses to update. Let me mention the operating system before proceeding. The operating system is Windows Vista Home Premium 64-bit. When I try to run Windows Update, the machine has a total of seven updates to install; This is especially important and option. In the important section, the machine is trying to install a security update and that is 9. In the optional section, the machine is trying to install the driver as updates: video, network, etc. The PC is already running Service Pack2. The error code I get is: 80096001. I tried every fix that Microsoft recommends, even the Microsoft Fix It tool. Nothing seems to work. I had a simular problem before in Windows XP. If my memory is good, I had to go to the entry in the registry of Windows Update and apply a DWORD here, or something; I don't remember exactly what I did. I can tell you that I checked the registry and there is literally no key to change in Windows Update. Any help or advice would be great, this question is about to drive me crazy.

  Thank you

  What's next for security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?

  You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.

  (When was the last time you checked your system for malicious programs?)

  Suggest you try to have the system scanned both of the following in this order - do not jump...

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

  How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  ESET Online Scanner

  http://www.eset.EU/ESET-online-scanner>

  Access the article KB971058 via Internet Explorer (only)

  If no malware is present - How to reset components Windows Updates?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:30 on Friday, October 7, 2011

• Problems with windows vista update during the installation of service pack 3 for sql server 2005 express edition.

  I have problems installing Microsoft SQL server 2005 express edition service pack 3. When I use windows update Setup does not exceed 0% and crashes. I tried to download the service pack online. When I ran the installer, it crashes when you try to install SQL server database services.

  Any help would be much appreciated.

  Hello

  Download SQL Server 2005 Express Edition Service Pack 3 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3181842A-4090-4431-ACDD-9A1C832E65A6&displaylang=en

  Restart the computer in safe mode.
  http://www.computerhope.com/issues/chsafe.htm#03

  Install the update in safe mode and check.

  Cheers and enjoy!

• Problems with Windows 7 update KB 2092914? Help.

  Hello!

  I'm in trouble while trying to install the update KB 2092914, update of Microsoft Works 9. How can I install it? I am using Windows 7 now. Thank you.

   

  Thank you for your help. I already fixed it.

• Satellite Pro L850-1 p 7 - wireless LAN problems

  I recently bought a L850 Pro Satellite 1 p 7 and led to a new installation on Windows 7 (64-bit)

  After the new installation, I manually installed the driver for the network card, I then shot all windows updates.

  In Device Manager, I noticed that it lacks a few downloaded drivers so a load of drivers who have resolved most of the issues.

  I don't have one that is still yellow, it's for network controller.

  My one question is with wireless network.

  I tried to install several drivers, but cannot get the wireless network card to show in the settings of the card.

  I can see a bit of reading I have a wireless / Atheros Bluetooth combo.

  Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter. After that I turn on Bluetooth with F12 function key, it warns me about issues with Bluetooth and wireless on at the same time.

  I also noticed that windows tells me there is a problem with the Bluetooth software and am trying to get download and install driver_bluetooth_TC00131900C

  This does not seem to fix anything.

  Has anyone else had this problem and the fix is? I really need to get my wireless working...

  See you soon
  Dave

  Hello

  You are right, that the Satellite Pro L850-1 p 7 was equipped with the WLan ATHEROS 802.11 A/G/N WB222 card, which also supports Bluetooth.

  > Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter.
  It is almost correct. But you forgot to install the Atheros WLan driver.
  You must first install the Atheros WLan driver then the filter package Atheros Bluetooth and battery Bluetooth.

  This should be the key ;)

• Satellite Pro L850: ATI Catalyst was able to start after the update of Windows

  Satellite Pro L850 with Windows 8 Pro 64 bit running OK with default Toshiba Catalyst Control Center and the 8.982.10.6000 video driver version. Video chipset is AMD Radeon HD7670M.

  This week, Windows Update offered an update of WDDM1.2 for HD7670M video driver to version 9. I thought it was OK to install it, as he came formally to Microsoft. The updated video driver installed OK.

  After a reboot everything works perfectly except the specially modified Toshiba Catalyst Control Center. CCC reports that "there are currently no parameters that can be configured using Catalyst Control Center". After that I drove back the new video driver version 9 to version 8.982.10.6000, CCC started working again.

  I checked for my laptop model Toshiba product support page, but it is not a new CCC by download. Toshiba will never be released a new CCC that works with the new Microsoft video driver? What alternatives are there?

  As far as I know these drivers are offered as option drivers and you should not install them. Stay with the original drivers. Don t update a driver offered through Windows update.

  Have you tried to roll back the OS to an earlier time before this update has been installed? If it does not do it and check the functionality.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.