Satellite Pro L850: ATI Catalyst was able to start after the update of Windows

Satellite Pro L850 with Windows 8 Pro 64 bit running OK with default Toshiba Catalyst Control Center and the 8.982.10.6000 video driver version. Video chipset is AMD Radeon HD7670M.

This week, Windows Update offered an update of WDDM1.2 for HD7670M video driver to version 9. I thought it was OK to install it, as he came formally to Microsoft. The updated video driver installed OK.

After a reboot everything works perfectly except the specially modified Toshiba Catalyst Control Center. CCC reports that "there are currently no parameters that can be configured using Catalyst Control Center". After that I drove back the new video driver version 9 to version 8.982.10.6000, CCC started working again.

I checked for my laptop model Toshiba product support page, but it is not a new CCC by download. Toshiba will never be released a new CCC that works with the new Microsoft video driver? What alternatives are there?

As far as I know these drivers are offered as option drivers and you should not install them. Stay with the original drivers. Don t update a driver offered through Windows update.

Have you tried to roll back the OS to an earlier time before this update has been installed? If it does not do it and check the functionality.

Tags: Toshiba

Similar Questions

  • I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

    I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

    The primary partition has the following folders (including hidden & system)

    The recovery partition has the following (including the language files more)

    Someone at - it ideas why my laptop does not work?

    Thank you

    Greg

    Hello

    You press F11 on startup with a HP Compaq to start the recovery process.

    For problems with the recovery process, you will need to contact HP.

    BIOS problems:

    There are messages for the HP Forums for posters with similar errors:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

    All the answers it point to a drive about to fail

    See you soon.

  • Vista was able to start after the auto update today

    the system configuration might caused the problem, the system files check integrity and repair failed, code of error = 0xa
    computer model acer Aspire 4930 - 732G 25 windows vista home edition premium OA (EM), no installation cd supplied so can not roll back, System Restore does not...

    keongklee,
    First, start from the Advanced startup options , and then select the 'last known good configuration."  If this does not work, try to start safe mode and then try a system restore.
    If your system did not come with a restore disc it must have a recovery hard disk partition.  You will need to check with Acer to see how to get there if you want to perform a factory restore. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • WLan AutoConfig was able to start with the error 193:0xc1

    Former title: error 193:0xc1

    My wireless does not connect because it says that the WLan service failed to start.

    I went to the computer > manage > services > WLan AutoConfig. It has been set to automatic but it was empty when he should have said start. When I tried to start it I got the message service was able to start and the error in the title.

    I opened the dependencies in order to check if that was the problem and each of them have begun. So, it seems that the error is always in WLan AutoConfig.

    I tried the system restore (this problem just started today) to an earlier point, last week. It sticks on the system restore is initializing an hour +. I tried several restore points, but it always gets stuck on initialization.

    I looked at similar questions and I did everything recommended in people, but it seems that the answers stop without the original poster saying that they got it to work or not.

    Hello
     

    Step 1.
    Follow the steps below and check if the problem is resolved:
    a. Click Start, and then click computer.
    b. go on the system disk, where the operating system is installed (usually drive C :).
    c. find the program file.
    d. remove this file and restart the computer and check if you are able to start the service.
    Note: If you don't see the program file check if the file is hidden. Clickhere to find out how to show hidden files.
     
     
    Step 2.
    If the steps above to solve the problem I highly recommend to run a Virus Scan online.
     
    Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
     
    a. follow the link below to start the free online scan:
    http://OneCare.live.com/site/en-us/default.htm
     
    b. run the malware removal tool from Microsoft.
     
    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
     
    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
     

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • 'Circular session context Logger Kernal' was able to start with the following error: 0xC0000035

    I hope it helps someone as it has been a persistent problem for some time at least six months. I did the research almost as long and also a solution for this, but I'm done here as a last resort. My question to had is that I believe that this occurs at the start of most of the time with the system, but can occur later also is originally the system will block also up and we have four other systems here that this was never a problem at all. I'm still looking and I hope to find an answer somewhere with out having to do a complete clean reinstall 7. I looked here for answers and met several all through the web, including here none have solved the problem.  I would be grateful at least someone leading me in the right direction on this issue if you can.

    Hope this is the right place to post also. If this isn't the case, please advise.

    Journal name:

    Source:

    Date:

    Event ID:

    Microsoft - Windows - Kernel-also racingl Admin
    Microsoft - Windows-Kernel-EventTracing

    02/06/2013 -07:59:57

    2

    Task category: Session

    Level: error

    Keywords: Session

    User: SYSTEM

    Computer: BarbKeenan-bail

    Description:

    Session "circular kernel context Logger" was able to start with the following error:

    OxC0000035
    EventXmI:


    BDB6-4648-BC92-F3FDC74D3CA2}">I >
    2

    O

    2

    2

    12
    Ox80000000000000 1 O

    I >
    2713

    I >

    I >
    Microsoft-Windows-Kernel-EventTracing/Admin
    BarbKeenan - bail

    I >


    Kernel context Logger circular

    3221225525
    268436608


    For what it's worth, I have this error periodically on several Windows 7 systems.

    She seem to be a non-event and does cause some system problems.

    I don't think that your freezing problem is caused by the present.

    However, take a look at this thread.

    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/2eab69ac-7537-40c4-916e-6f6d41c05d4b

  • Session "circular kernel context Logger" was able to start with the following error: 0xC0000035

    Is there a way to eliminate the error "Session"Circular kernel context Logger"was able to start with the following error: 0xC0000035?

    Hello A123.

    Thanks for the return of the response.  Regarding your last question, some were told that they have ignored this error without any problem, but I would like to see if we can fix that.  If you start in a clean boot state, you can reproduce this error?  I want to see if a program is causing this to happen.

    Clean boot:

    http://support.Microsoft.com/kb/929135

  • Journal of session "Homegroup" was able to start with the following error: 0xC0000035

    Hi my event error log says: session "Journal of home group", was able to start with the following error: 0xC0000035

    I don't have a setup of home group because I am the sole operator of my PC. (Windows 7 SP1 x 64).
    I assume that the error is so wrong? Y/N?
    If so is there a way to change the reports for this message?
    Thanks for all the support.

    Hello

    1 are you facing a problem to work with any application because of the error?

    2. do you have connected on a network printer?

    3. you remember changes to the computer before the show?

    I suggest you try the following:

    Run a scan of the System File Checker.

    http://support.Microsoft.com/kb/929833

    Also, make sure that homegroup is not created on the computer, even if the computer is not connected to the other computer. When you configure a network device it will prompt you to create a home group. Check the following link to leave a homegroup.

    http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

  • vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

    Hello

    Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

    vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

    Thank you

    John

    Hi John,.

    This is due to host on the vCenter server entries. Please try the procedure below

    Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

    C:\Windows\System32\drivers\etc\hosts

    # 127.0.0.1 localhost

    Note: If a line does not exist in the hosts file, add it at the end of the text.

    #) to remove the comment from the line of IPv4.

    1. 127.0.0.1 localhost
      ·  Save and close the file.
    • localhost127.0.0.1.

      • GoTo services.msc and start VMware Virtual Center Services.

    Thank you

    Venance

  • My pc with UEFI windows8 was able to start at the WSC windows8

    I don't know if it's supposed to happen, but recently I wanted to install windows7 and I put my system in legacy mode and came a message saying that I wouldn't be able to start the operating system. To restart my system, Windows8 was able to boot to the CSM. If it's supposed to happen? When I changed it to UEFI also started. My system can start at windows 8 in the two MCS AND of UEFI?

    Hello

    Thanks for the reply.

    As you have Windows 8 on your computer, there is no point on what you can not use Windows 7 installation. But, you can install Ubuntu in another partition and use it by disabling the UEFI mode and secure boot options.

    Let us know if you have any additional questions.

  • Satellite P300 - 1 H 9 does not start after the update of the BIOS didn't

    I perform an update BIOS, but before the update was completed second shortly after), the laptop has been frozen and is not used to shutdown evenn if hold start buton. So I disconnected the battery and plugin power after that I have reconnceted the plugin from power, then press the power button, it showed a black screen and i heard a
    beep (1 long, 2short)
    CLR CMOS can solve the problem?

    Where the rider is to do the reset?

    P300 - 1 H 9

    Thank you very much...

    Hi mate

    Seems that something was wrong during the BIOS update process.
    Usually the BIOS update should work correctly but the BIOS update is always sensitive technique and something like that can happen.

    Usually the CMOS must be cleared first and then the ROM module must be flashed again. This can be done by an ASP.

    Be in contact with an ASP in local guys help!

  • Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

    Dear Sir

    I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
    I try to do the recovery only by pressing f8 without answering.

    How can I recover my laptop to its state of origin as drive HARD recovery again in d:
    Thanks in adv

    Hello

    You will not be able to restore the factory settings because another operating system has been installed on the first partition.
    Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

    But if this doesn t work then you will not be able to use HARD drive recovery.
    In this case, you will need to order the new CD from here:

    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Satellite Pro C50-A-1E2: problem get into BIOS after the activation of the quick start

    Hello

    I own Satellite Pro C50-A-1E2.

    Default hard drive has been replaced by a v300 kingston ssd. I also enabled quick start.
    I am trying to get into the BIOS but without success.

    I tried all possible combinations (Esc, DEL, f1, f2, f8, fn + esc, f1... fn)

    I found this piece of information through Googling: "press f2, and then press power. But always without success.
    Help with my problem?

    Thank you.

    Hello

    Quick start can be enabled and disabled too using the Toshiba software called Desktop Help. Within this tool, you would find the HWSetup Toshiba and this part of software must contain the quick start option.

    Check it out.

    By the way: for some series laptop, press INS key then F2 worked too.

  • HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

    I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."

    I checked my graphics driver and it says that it is up-to-date.  I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem.  An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.

    I also tried the Intel and HP driver update utility and told me that my drivers are up to date.  However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."

    I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade?  Advice or opinions would be appreciated!

    My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279

    I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.

    I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver.  I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.

    I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).

    With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel?  If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.

  • My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

    Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

    Hello

    Code 39 means that the driver is corrupted or missing.

    Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
    Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
    These however is a possibility depending on which and how many you have installed.

    Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
    allows the reader to work (not re - install until the issue is resolved).

    -------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I have a gateway dual core w vista sp2 (10/10/12) latest version of windows update was able to start after his stop.

    There was a large number of updates and after repair is restored to the previous, I suppose that nothing works properly now.  Word and excel will not start now and have macafee ISP software freebie.  Everything started having all sorts of fun with this computer after upgrades and will never buy another operating system of windows again.  You lost me for mac because I'm sick of working on these to get the Junk to run.

    Hello

    There are a lot of repair Vista and recovery information in the connection of the gateway, including the recovery to factory settings.

    http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

    See you soon.

Maybe you are looking for

  • My spell checker has stopped working.

    My spell checker stopped check I typed and also when I intentionally misspell and press 'check' spelling, it says "no misspelled words".I downloaded a dictionary and still no show. (problem was there before I tried a new dictionary.I use WDOS 7. Unde

  • simulation of mx DAQ

    Buen dia. me gustaria simular tajetas mio y dio, e visto videos than simulan voltajes y señales pero no explica como, lo quiero are simular sin nada solo external the computadora, usar una fuente o osciloscopio simulados para simular señales entrada

  • DAQmxWriteDigitalU32 writes zero channel

    I learn to use NIDAQmx in my process control project and am stumped with my problem. I'm using LabWindows CVI 8.5 and PCI-6229. Here is the code segment causing problem ---------------- OUTPUTS DIGITAL DAQ 0-23 reserve linechar chanP1Leds [] = ' dev1

  • I just put a sony cd - rw crx216e and does not burn...

    Simply put a cd - rw burning and the custom of sony crx216e... I tried updated and running microsoft fix so far. Fix, what he says is not capable of burning cd - rw is not sure what to do? also tried the dell site for driver downloads/patches, nothin

  • Problem with standalone AP1602 Airprint

    Hello We have 2 Standalone AP1602. It works very well with perfect coverage. However, we have the problem that we cannot print our devices via Airprint. With the Linksys access points old it works, but after that we implemented the new Airprint APs d