Satellite Pro L850 - keyboard / touchpad does not work

Similar Questions

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Dell place 11 Pro travel keyboard - touchpad does not

  I bought the DVP11 with travel keyboard, and touchpad not responding after working initially. The keyboard is completely loaded, as is the DVP. All other keys on the keyboard work. Dell tried updating the BIOS support and several parameters of the driver, but no change. Thoughts before I have send the keyboard backwards?

  Mine has started working after the update too. But I think you're right that the problem is related to the battery or charge, touchpad no longer works after that I loaded the keyboard separately and then connected it. There are also some problems of connection between the keyboard and screen, if the screen turned completely open position, so it rests against the back of the keyboard, keys or the touchpad does not work.

• Satellite C855 - 1 HM-Touchpad does not work

  Hello

  My touchpad does not work! indications are he should be, pilot the newest, toggle F5 etc. Any ideas as to what may be wrong welcome. Machine is also only a few weeks, how do you contact technical support?

  Thank you

  Hello

  You can contact the Toshiba authorized service partner in your country, your hardware is defective.
  But you should first check if its hardware problem.

  First of all, you should check if the touchpad (pointing device) is enabled in the BIOS
  Press F2 during the powering of the device and go to the Advanced tab-> the system setup
  You will find the touchpad power option.

  If the touchpad is enabled in the BIOS, I recommend to check the touchpad system settings: Control Panel-> mouse-> last (Advanced) tab-> Advanced button

  Last but not least you should recover the laptop to test the device with factory settings.
  If all these tips would not be successful success, well, then I recommend to ask the guy to service

• Shortcuts keyboard touchpad does not work after installing Wii XP on Satellite A200-1HV

  Synaptics touch after that installation of Windows XP does not work.
  http://i043.Radikal.ru/0805/C5/09a7324bc1d2.jpg

  On Vista I touch "Two arrows" touchpad lite to the top of blue color, but now it doesn't.
  I installed the driver for Win XP Toshiba web site.

  How about the hot keys on the touchpad?

  From Russia with love =)

  Can be I said isn't right, problem? I'll try to talk about my pain. In Windows Vista Home Basic, when I touch "2 arrows" (you can see it on the screen, Angel of the top-right), after that, touchpad started a blue fluorescence, and after I press 1 to 6 buttons on the touchpad (they were all in the red circle) and starts the application tha. But no, when I touch "2 arrows", nothing has changed. It's information helps solve the problem?
  P.S. I try phone support, but now in Russia, we have vacation =)

  Sincerely your JIABP.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Re: Satellite Pro S500 - brightness adjustment does not work correctly

  On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.

  When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.

  Hi asdf.

  I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled

  In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.

• Satellite Pro L350 SSD upgrade does not work

  Hi all

  I'm trying to upgrade a Satellite pro L350 with ssd, currently I try with an ssd samsung 830. I've already updated the bios to version 2.2, but it doesn't work. Can someone help me?

  Concerning

  Mike

  and what exactly does not work?

  The SSD is recognized by the BIOS?
  Have you checked if the SSD has need of a firmware update or if a firmware update is available

• Satellite C870-155 - the Touchpad does not work

  I have a Satellite C870 - 155 (PSC8AE) and problems with the touchpad.

  The buttons work, but not the pointer/trackpad.

  The laptop was in need of a replacement hard drive, and I don't have any recovery media. I'm running a new installation of Windows 7 (Home Premium, 64-bit) vanilla.

  I installed all the drivers, that I can find (including the touchpad).

  I tried pressing F5 / Fn + F5, but this does not change anyuthing that I can see.

  I am running the latest version of the BIOS I can find (6.60).

  Any suggestions?

  > Everything seems to work except the pointer.
  I guess that s hardware problem and the touchpad module must be replaced.
  I m straight probably because if the touchpad would be disabled or drivers that would be misunderstood, the touch area AND the touchpad buttons would not work.

  In your case touch ONLY area/pad does not work, but the buttons

  But just to be sure: go into the BIOS (F2)-> Advanced tab-> the system setup
  Here you can check whether the pointing device (touchpad) is enabled.

• Satellite L50-B-211 - Touchpad does not work

  Hi I have a question

  We just bought a Satellite L50-B-211, but the touchpad is not working properly.
  Move the pointer autour is no problem, but the buttons do not work.

  Using the buttons does nothing, left or right clicking has no effect?
  If I want to get the properties of a file right-clicking does not work?
  (two fingers press work)

  The hardware is correctly installed, there is no problem in the configuration of the device.

  Do I have to return the device (before installing our software / config the device to our needs)
  or is this a software bug?

  According to specification for laptop, your laptop was supplied with Win8.1 pre-installed so that all the necessary drivers are installed and all hardware should work fine.

  Try please check all the touchpad settings and check if changing the settings has positive effect.
  What you can try to do is to reinstall the original recovery image and test once more with the factory settings. If the result will be the same, I recommend you to contact your dealer as soon as possible and explain the situation. Ask if you can get the new machine.

• Satellite M105-S3031: the TouchPad does not work

  Hello guys!

  I have a M105-S3031 Satellite. It's been 1 week shut down and this morning when I turned it on, the touchpad did not work, check status, that's like "enable." I installed a mouse cable and with it works well.

  Any help?
  TKS.

  Check it please again using FN + F9 key combination.

• Satellite A7330 S75Dt - keyboard backlight does not work

  Hello

  recently I bought this laptop A7330 S75Dt with windows 8, and after 2 days, the backlight of the keyboard has exploded.
  The Fn + Z combination indicates it's on and it should work, but it's not.
  I don't need it but its irritating that it does not work. I hope someone can help me.

  Thank you
  Luk

  Go to the BIOS by pressing the F2 key while under tension.
  Then go to advanced-> configuration of the system and check if the lighting of the option is enabled.

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!