Satellite Pro L850 - slider 'hang up' and related problems

Similar Questions

• Satellite Pro L850-1 p 7 - wireless LAN problems

  I recently bought a L850 Pro Satellite 1 p 7 and led to a new installation on Windows 7 (64-bit)

  After the new installation, I manually installed the driver for the network card, I then shot all windows updates.

  In Device Manager, I noticed that it lacks a few downloaded drivers so a load of drivers who have resolved most of the issues.

  I don't have one that is still yellow, it's for network controller.

  My one question is with wireless network.

  I tried to install several drivers, but cannot get the wireless network card to show in the settings of the card.

  I can see a bit of reading I have a wireless / Atheros Bluetooth combo.

  Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter. After that I turn on Bluetooth with F12 function key, it warns me about issues with Bluetooth and wireless on at the same time.

  I also noticed that windows tells me there is a problem with the Bluetooth software and am trying to get download and install driver_bluetooth_TC00131900C

  This does not seem to fix anything.

  Has anyone else had this problem and the fix is? I really need to get my wireless working...

  See you soon
  Dave

  Hello

  You are right, that the Satellite Pro L850-1 p 7 was equipped with the WLan ATHEROS 802.11 A/G/N WB222 card, which also supports Bluetooth.

  > Reading some other threads that I downloaded the value added package, the package of Atheros Bluetooth and Bluetooth stack filter.
  It is almost correct. But you forgot to install the Atheros WLan driver.
  You must first install the Atheros WLan driver then the filter package Atheros Bluetooth and battery Bluetooth.

  This should be the key ;)

• Satellite Pro L850-1 p 8 PSKG7E - unable to see BT devices

  Hello
  I have a Satellite Pro L850-1 p 8 PSKG7E-00C002EN. Initially, I had a problem with the software, acknowledging the equipment. Resolved by reinstalling the filter of Atheros driver. Now all it works and the latest drivers are installed.
  I have a phone, a Nexus 7, a car and Panel PV all see each other by using their BT, which go hand in hand.

  Application via bluetooth which worked on a previous works Tosh Satellite Pro links table of PV in a PC-based.

  The laptop refuses to see devices nevertheless say that it works correctly and all other devices are visible to the other.

  BT RFBUS Toshiba 8.0.2005.0
  BT RFCOMM Toshiba 8.0.1129.0
  BT RFHID Toshiba 8.0.830.0
  BT RFUSB controller Toshiba 8.0.2005.0 14

  As far as I can see there is no entry of BT in the BIOS.
  I tried the FN F8 in both States.

  Can someone give me advice?

  When you use BT on your laptop, it is important to activate the BT module correctly. I guess it works with FN + F8. When the BT is Manager of BT should start and in the taskbar, you should see a blue symbol BT.

  When you turn on the BT don't boot manager or not? Click on this symbol with the right mouse button and choose the option Add a new connection. Scan the area and hope that your device should be found (enable visible modus).

  You are right about the BIOS. There is nothing related to the features of BT.

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Satellite Pro L850-1NR - dualboot Win7 / Win8

  Hello world

  I use my L850 - 1NR Satellite Pro for the school. I go to a technical school for information technology, and we use windows 8. The problem is that * Windows 7 preinstalled * on my laptop and home, each PC works with Windows 7.

  When you buy a Satellite Pro L850 1NR, you get two * installation Windows 8 CD *, if I want to make one * dualboot Windows 7 and Windows 8 *. I know how to create a new volume on my hard drive, but when I run the first disc, the only option is to remove Windows 7 and install Windows 8.

  Is it possible to dualboot this and if it is possible, what should I do?  :|

  Hello

  Windows 7 is pre-installed on your laptop. 8 win was provided on DVD discs.

  In both cases; Win 7 and Win 8 is part of the image of Toshiba.
  Toshiba is a package containing all the drivers, tools and utilities.

  It s is not possible to keep the Win 7 on the HARD drive and install 8 additional to win using the recovery disk provided.
  Why? Because this isn't clean system Win 8, but as mentioned; his image.

  But in general, its possible to have a system dual boot (8 Win and Win 7). The start menu will be created that will allow you to choose between Win 7 and Win 8 OS.

  You will need to create simply new partition in Win 7 system.
  Then, you must start the MS Win 8 disk clean and could install the 8 Win on the new created partition.

• Satellite Pro L850 - Synaptics finger scroll

  I would have preferred a finger scrolling along the right and below of the touchpad (as my old Toshiba Satellite) but this Satellite Pro L850 1MJ has two fingers to scroll in the middle of the touchpad that is counterintuitive (push up to scroll to the bottom) and more importantly means that I have to hold my hand in a position that kills my wrist.

  If I go into the settings of the mouse, I can pass various options "multi-finger" two-finger scrolling and there is a separate option "scrolls" - on / off if I check the box on I get a graphic demonstration of scrolling with a finger, but it does not actually turn on scrolling with a finger.

  Can I get a finger scrolling on this laptop? If so, how?

  'Settings' tell me I have v7.5 Synaptics TouchPad on PS/2 Port and v16.2.10.3 14 Aug 12 Synaptics pointing device

  All the responses received with gratitude, preferably before my wrist decreases!

  Elaine

  I don't know what version and settings you have but if synaptic settings on your machine it looks like this that do not use two fingers to scroll and activate the scroll option.
  Click on this option and the animation, you will see how it works.

• Satellite Pro L850 1DR - problems with Windows 7 update KB2887069

  I have problems to install the KB2887069 update.

  It seems to install OK... prompt me to restart... when I do it, says it configures... GETS to 7%, then starts rebooting... watch it configures again... up to 7 or 9%... and then reports it is defect and restoring... restarts again... and it is quite... not installed and reference to Windows Update confirms it failed.

  All the other updates I had installed today very well once I realised KB2887069 was the problem and failed to update.

  I am running Win 7 Prof Serv Pack 1 64 - bit on a Toshiba Satellite Pro L850 1DR. I use my AV Microsoft Security Essentials software.

  For now I had to hide the update... but all of the bright ideas how overcome the problem. I tried the Microsoft site, but there is still no answers who brought a solution for me.

  Thanks in anticipation!

  I googled around for KB2887069 update and it seems that you are not alone with this problem to Microsoft Update. I also found your request in the forum, Ms.

  In other words, that's not a problem of mobile by this must be resolved by Microsoft.

  I read in the MS forum on this issue and this issue is still under investigation.

• Satellite Pro L850-1DZ - wireless keeps dropping

  Hi all. Thank you for taking the time to read this. I have a Satellite Pro L850 1DZ and my wifi guard fall then plugging himself. It does this to Uni, in my old House and the new. The router was changed when I moved. It can fall so im sitting next to the wireless router and when im in another room. There is not no more wireless phones. Any ideas?

  Thank you very much
  Rhys

  Does it happen with the AC adapter plugged in, or by using only the power of dough mode?

  In which case it would only happen by using battery power mode, I recommend to change the saving parameters as shown here:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Watch wireless adapter power saving Mode settings
  Also an update of the WLan driver would be recommended.

• Satellite Pro L850-1DT impossible to install Win 7 driver wireless

  Please, I beg you.

  On costs to install Windows 7 64 bit downloaded all drivers wireless I can find on the site of tosh.
  No work.

  Find in this page http://www.toshiba.co.uk/discontinued-products/satellite-pro-l850-1dt/ ended
  Says spec card Atheros.

  Try reinstalling the driver atheros, it gets a little then disappears and nothing happens.
  Tried the driver atheros here too, but moved, but no functionality.

  At one point, I tried the function and F12 key on and outside, that seemed to allow some stuff of bluetooth and wireless.
  I have "Network controller" and "Unknown device" in Device Manager with yellow exclamation points.

  Heeeeellp please.

  You're right, it seems that the laptop Satellite L850-1DT was equipped with the Atheros WLan card and the Atheros WLan driver should be right.
  This Atheros card also supports Bluetooth function and what an additional driver must be installed for both WLan + BT working.
  First you must install Atheros WLan driver suite by packet filter for driver Atheros BT and battery Toshiba BT.

  Of course, all other tools like value added Package for Windows 64-bit must be installed too!

  I hope this helps.

  By the way: driver can be found on the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
  Here you choose the Satellite Pro L850 PSKDHE

• Satellite Pro L850-1UJ: how to create DVDs from recovery partition recovery

  I recently bought a Satellite Pro L850-1UJ with Windows 8
  http://www.Toshiba.co.UK/laptops/Satellite-Pro/l850/Satellite-Pro-l850-1UJ/

  I created a new partition (if I could use it as a data room)
  i.e. C: windows system z AND my data

  After that, I couldn't use the RECOVERY MEDIA CREATOR to create recovery DVDs
  BUT the score still exists and I can see the inside of the windows files

  It IS a way to extract the files from the recovery partition or any other idea how I could fix the partition scheme so the RECOVERY MEDIA CREATOR he might recognize

  Thank you very much for your time...

  After changing the structure of the partitions on the HARD drive, sometimes that recovery media creator Toshiba cannot find the files for recovery. These files are marked with special markers which, in your case, will be more found.

  I m afraid is now too late to make or change anything. You're not the one with this problem. We always write here that the first step should be the creation of recovery media and later you can do what you want. You can even remove.

  Now, you can just order new recovery disc to https://backupmedia.toshiba.eu/landing.aspx

• Satellite Pro L850: ATI Catalyst was able to start after the update of Windows

  Satellite Pro L850 with Windows 8 Pro 64 bit running OK with default Toshiba Catalyst Control Center and the 8.982.10.6000 video driver version. Video chipset is AMD Radeon HD7670M.

  This week, Windows Update offered an update of WDDM1.2 for HD7670M video driver to version 9. I thought it was OK to install it, as he came formally to Microsoft. The updated video driver installed OK.

  After a reboot everything works perfectly except the specially modified Toshiba Catalyst Control Center. CCC reports that "there are currently no parameters that can be configured using Catalyst Control Center". After that I drove back the new video driver version 9 to version 8.982.10.6000, CCC started working again.

  I checked for my laptop model Toshiba product support page, but it is not a new CCC by download. Toshiba will never be released a new CCC that works with the new Microsoft video driver? What alternatives are there?

  As far as I know these drivers are offered as option drivers and you should not install them. Stay with the original drivers. Don t update a driver offered through Windows update.

  Have you tried to roll back the OS to an earlier time before this update has been installed? If it does not do it and check the functionality.

• Password lost for my new Satellite Pro L850-1DT

  I bought a new Satellite Pro L850-1DT and went through the installation process. He suggested to install a password to logon to safety. So I put an and confirmed. The pc has agreed. The pc then rebooted to install new programs. He asked me to put my password to logon, I did. He said then that is the wrong password. I tried again and again, with different permutations, in the case where I had made a mistake in the initial configuration. No luck. I can't access.

  Y at - it someone who did something similar and who knows of a possible solution to get access. At this point without disk recovery, because I don't have a lot. Please help if you can.

  Oh man why are you doing these stupid mistakes? :(
  You can set the password later. At first, it is important to complete the installation of windows, check the machine and see how it works.

  Your problem is that you don't have a recovery disk. Using the recovery disk, you can reinstall OS and everything will be OK. Now same disk image installation HARD recovery cannot start without this connection password.

  As much as I know there not that you can do about it. I hope someone on this forum has the solution for you. Otherwise order the original restore on https://backupmedia.toshiba.eu/landing.aspx disc

• Satellite Pro L850-1DV: manual driver installation repair md5 command

  Technical support could please provide some details on the correct order to install the downloaded drivers from Toshiba for a Satellite Pro L850-1DV for Windows 7?

  Also, is there another method to install the drivers to download and unzip the 44 separate drivers?
  I remember there are 47 drivers that are installed during a repair recovery partition but 44 available for download.

  I guess things like the creative software recovery media are not included in these downloaded drivers, or something else that does not included?
  I would like to try an install of Windows 7 media.

  I could also ask if anyone with a L850-1DV and appropriate tools, such as a Linux installation might be able to tell me the sum of md5 checksum for the recovery hard disk partition. That would be fantastic!

  Best wishes,
  David

  Try this:

  Windows 7 SP1 of Win7 64 bit
  SW 9.3.0.1020 Chipset installation utility
  Intel Management Engine Interface 8.0.1.1399
  Driver Intel 8.15.10.2639
  Driver Intel Rapid Storage Technology 11.0.0.1032
  Realtek Audio Driver 6.0.1.6559
  ATI HDMI Audio Driver 7.12.0.7704
  HD 1.12.0300 SRS Premium Sound Technology
  Synaptics Touch Pad Driver 15.3.38.2
  Realtek LAN Driver 7.48.823.2011
  Atheros Wireless LAN Driver 9.2.0.474
  Atheros Bluetooth Driver Package v1.0.12 Filter
  Battery Bluetooth for Windows by Toshiba v9.00.00
  Bluetooth Monitor v4.08
  Intel USB3.0 Driver 1.0.1.209
  Realtek 6.1.7601.30130 card reader
  TOSHIBA value added package 1.6.0021.640203
  TOSHIBA Sleep 1.4.0022.000104 utility
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.2004
  TOSHIBA Media Controller 1.0.87.5
  TOSHIBA Media Controller plugin 1.0.7.7
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 20
  TOSHIBA Web Camera Application V2.0.3.33

• Satellite Pro A40 inside cleaning due to overheating problems

  Hi Forum,
  I want to clean my Satellite Pro A40 carefully inside due to overheating problems.

  Can someone provide me with a sort of manual how to open the SPA40 correctly resp. How to clean it.

  I think that indoor air to blow a few tablets will not solve the problem, there is a lot of dirt and dust inside.

  IWant to do myself, so please do not recommend you speak to a technical expert.

  Thanxx in advance...

  Hello

  > I want to do it myself, so please don't recommend me to contact a technical specialist.

  In my own opinion, generally it s not a bad suggestion if some advises to contact a technician for laptop to a radiator cleaning because the dismantling of most of the computers mobile new generation is very delicate and not easy. Mostly one or the other has no experience and in this case, it is best contact an ASP to help him try to clean the laptop and probably damage parts.
  If the warranty is valid such procedure will void the warranty

  But don t worry buddy ;) I'll try to help you as much as I can
  I have goggled a bit and found it nice [statement | http://www.irisvista.com/tech/laptops/ToshibaA45/Satellite-A45-remove-hinges-1.htm] how to disassemble the Satellite A45.
  The A45 is very similar to the A40 and so pictures of the laptop must be the same.

  Step 4 (photo) and step 5 shows the dirty radiator and how to remove it.
  You do not need to disassemble the laptop full but only the radiator at the bottom of the unit cover.

  Notes; Always be careful and don't use force to remove anything ;) and you know everything you do are at your own risk

  I hope I could help. Best regards and Merry Christmas ;)

  Good bye

• Satellite Pro P100 - 11(d) crashed and Linux does not load

  Hello.

  I have a Satellite Pro P100 - 11(d) which have worked well since 2007 both with preinstalled Windows and Ubuntu last.

  But... Yesterday, Firefox crashes, I thought, but after the restart it was not able to load Ubuntu desktop, comes from a command prompt.

  I tried to reinstall the driver and xserver with no luck.
  Tried to reinstall Ubuntu together, but it stops while loading of Ubuntu live.

  Thought maybe, a hard drive crash so I want to wipe the entire hard drive and so reinstalled Windows, which wouldn't load after installation. Changed the hard drive to a WD250GB, but always the same - stop loading live Ubuntu and Debian and Meego...

  Has a verified memory from the live USB of Ubuntu (before loading Ubuntu), no errors.
  I have an idea that maybe the graphics, but it has no errors or defects to display install screens - graphics.

  Anyone have any ideas?

  Oh, I had Ubuntu while loading, try checking the hard drive and what makes some mistakes, why I thought it might be a hard drive problem.

  Thanks in advance
  Leif

  Hello

  What about another system? Windows?
  Can you start and install Windows system using the Toshiba Recovery disk?

  Generally speaking, it is not easy to say what has caused this problem
  It may be related to no hardware, a part even if the HARD drive or memory error was not detected, one of these parties may malfunction
  Worst case its something wrong with the motherboard but it s only a hypothesis.