Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

Similar Questions

• Re: Satellite Pro L - error using the recovery media creator

  Try to copy in memory USB, using Recovery Media Creator, original image from the Pc; just in case of future problems, I get this message: error 040 EAE-02-000000000.
  No idea what this means?.

  Thank you

  Hello

  Have you tried another USB key? The stick is probably defective, so the recovery media can t create successfully.

  Also format the stick before using the recovery media creator.

• Re: L50 - B Satellite - 2 2 - where to find "Recovery Media Creator"?

  L50 - B satellite - 2 2.
  preinstalled Windows 8.1

  Where can I find the "Recovery Media Creator"?
  I found a description how to use but none where to find...

  Paul

  Start please help Desktop > support & recovery > and you will find the recovery media creator.

  You can also find if you use search option.

  Check it out please.

• NB200 - Recovery Media Creator and drive HARD USB

  I just bought a white NB200 and noticed that it does not come with a DVD of Windows 7 in case I ever need to install.
  I was informed by the seller in the store I could save a copy on a USB key using a recovery disc writing.
  I assume that "Recovery Media Creator" is the best way to do it.

  I booted up and it said that it will be 6.7 GB. I don't have a USB this size, but have a portable hard drive (250 gb) with 120 GB to spare.
  Even though I can view the drive in Windows Explorer / workstation, the program of recovery media says ' Please insert a USB drive with greater than 6.7 GB memory ', whenever I click on the create"" button.

  If anyone can help?

  Hello

  I doubt that you can use the USB HDD to create a recovery disk image.
  The Toshiba recovery disc creator has been designed in order to create a bootable recovery disk!
  It has not been designed for sure the image of Toshiba on the HARD drive!

  So if you want to use the Toshiba recovery disc creator then you must buy a USB CD/DVD drive that can burn the recovery image on a DVD

• Recovery Media Creator and USB

  I try to use "Recovery Media Creator' loading on a 16Gig USB drive.
  The program insert me a greater than 12 Gig USB flash drive ask what I do.

  He said while the drive will be formatted and then comes up with "Format Failed (Error Code: 040E49-04-00000000)" and the USB key becomes illegible. Using disk of Windows & tool management I can then format the drive and use it becomes usable with the exception of "Recovery Media Creator".

  I formatted in FAT32, NTFS and exFAT, but none does.
  I tried two USB flash drives, both the same behavior.

  As far as I know, there are no partitions on the disk and I used successfully "Recovery Media Creator" on one of the disks in the past. I want the files to restore another computer, something I've done successfully before.

  I can burn data using DVD but the DVD did not work so I want to try the USBs. I have read some threads in this direction but have not found the answers to date. I'm sure that there is a simple explanation but I'm not.

  Usually, the creation of recovery using the USB flash key support should work fine.

  I read in some other threads that the preinstalled anti-virus software could cause similar problems... so I recommend you to disable the antivirus and other security software... so this should work

  Other guy says that delete the partition entirely and create a new simple volume would also work.

• Satellite Pro C660-239 - restore from recovery media error

  Hello!

  I have a laptop from a client, it is a Toshiba Satellite Pro C660-239, and I'm having a strange problem.

  The original hard drive failed, and as the laptop is out of warranty, we bought a new hard drive and ordered the recovery media to this model, our assistance to repair local toshiba.

  After the installation copied the files on the disk, the imageX command fails when you restore the image with error files:

  "the file or directory is corrupted and unreadable."

  The hard drive is new, and I also tried with more than 2 hard drives, as well as with an external cd-rom drive.

  I spoke with the support of assistance local repair, and told me that this happens because the ins new ' t compatible with the recovery media hard drive?

  One of the new disks hard I tried, was the exact same model as the original hard disk, and the error persists, so the hard drive may not be the problem.

  Y does it have that no change in the recovery media is corrupt?

  Could also be a motherboard problem?

  Thank you

  > Is there any change in the recovery media is corrupt?
  Of course, this is possible.
  In case the HARD disk is OK, the recovery media may be damaged.

  > Could also be a motherboard problem?
  I don t think so. I imagine that the HARD drive is recognized correctly in the BIOS and the error message says something about corrupt directory. I guess the disk directory that is the meaning and I think that the media should be replaced.

• Re: Satellite L100 129 - cannot burn DVD more but can write to CD

  Hello

  I speak very well English, please try to understand me...
  I have a Toshiba Satellite L100 129. I burn long before DVDs, but since a week I can't do anymore! I can't burn CDs even but today morning I tried to burn a CD and it worked successfully. I also tried to burn a DVD, but it does not work. Whenever I tried it shows me this kind of message in alcohol:

  * Information system *.
  Windows XP Home Edition 5.1 Service Pack 2 (Build 2600)
  Processor Info: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1662 MHz)
  Memory available to Windows: 1.038.384 KB

  * Information program *.
  File name: C:\Program Alcohol Soft 120\_Alcohol.exe
  Legal name: Alcohol Soft Development Team
  Description: Alcohol 120%
  Original: Alcohol.exe
  Product: Alcohol 120%
  Brand: Alcohol Soft Development Team
  Copyright: Copyright (c) 2002-2008 Alcohol Soft Development Team
  Version: 1.9.7 (Build 6221)
  Date: 2008/02/22
  Size: 1815496 bytes
  Hash: ee833b4b446b7fa2e05541d4090f3c33
  File name: C:\Program Alcohol Soft 120\alcoholx.dll
  Legal name: Alcohol Soft Co., Ltd.
  Description: Alcohol virtual device control library
  Original: alcoholx.dll
  Product: alcohol
  Copyright: Copyright (C) 2000-2008
  Version: 4.12.0 (version 0)
  Date: 2008/01/18
  Size: 1244640 bytes
  Hash: f1274ca402d9296cd31eacc34a88bbea
  File name: C:\Program Alcohol Soft 120\devsupp.dll
  Legal name: Alcohol Soft Development Team
  Description: Alcohol software device capability
  Origin: devsupp.dll
  Product: Alcohol software device capability
  Copyright: Copyright (c) 2002-2006 Alcohol Soft Development Team
  Version: 2.5.4 (Build 222)
  Date: 2008/02/22
  Size: 60288 bytes
  Hash: 4b22ef831539d9f5b6923d3d286141e7

  * User information *.
  License: UNREGISTERED
  Registered user ID: not REGISTERED

  * Options setting *.
  Devices of control interface: default driver control Interface
  CPU priority level: high
  Size of buffer (MB): 256
  Examine the accuracy of data read from physical devices: Yes
  Activate the Enhanced weak sector Scanner during dumping: No.
  Overburn disc (s): No.
  Disable "write better automatic speed selection" if possible: No.
  Fill memory buffer before recording discs: Yes
  Book now Type DVD + R / DVD + RW disc as DVD-ROM when burning: No.
  Ignore Media Type: No.
  Refrigerants (re-writable physical Signature) emulation: No.
  BAD sectors emulation: No.
  Data fixed & emulation of subchannel: No.
  Laserlock emulation: No.
  Current language: French

  * Device (s) list *.
  (D) HL-DT-ST DVDRAM GMA - 4082N (atapi, Port 1, Bus 0, Target 0, Lun 0)
  (G) QO2663I TAI648E (asukl9p6, Port Bus 2, 0, Target 0, Lun 0)

  ACPI.sys ACPIEC.sys C:\windows\system32\drivers\aegisp.sys afd.sys asukl9p6. SYS
  ATAPI.sys ATMFD. DLL audstub.sys BATTC. SYS c:\windows\system32\drivers\beep.sys
  BOOTVID.dll Cdfs.SYS cdrom.sys CHDAud.sys BoiHwSetup.sys
  CLASSPNP. SYS CmBatt.sys, compbatt.sys disk.sys DLABOIOM. SYS
  DLACDBHM. SYS DLADResN.SYS DLAIFS_M.SYS DLAOPIOM. SYS DLAPoolM.SYS
  DLARTL_N.SYS DLAUDF_M.SYS DLAUDFAM. SYS drmk.sys DRVMCDB. SYS
  DRVNDDM. SYS dump_atapi.sys dump_WMILIB. SYS Dxapi.sys dxg.sys
  dxgthk.sys enodpl.sys Fips.SYS fltMgr.sys Fs_Rec.SYS
  Ftdisk.sys hal.dll HDAudBus.sys hiber_WMILIB. SYS HSF_CNXT.sys
  HSF_DPV.sys HSFHWAZL.sys HTTP.sys i8042prt.sys igxpdv32. DLL
  igxpdx32. DLL igxpgd32.dll igxpmp32.sys igxprd32.dll imapi.sys
  Intelppm.sys ipnat.sys ipsec.sys isapnp.sys c:\windows\system32\iviaspi.sys
  Kbdclass.sys KDCOM. DLL kl1.sys klbg.sys klfltdev.sys
  klif.sys c:\windows\system32\drivers\kmixer.sys ks.sys KSecDD.sys klim5.sys
  mdmxsdk.sys mnmdd. SYS Modem.SYS mouclass.sys MountMgr.sys
  C:\windows\system32\drivers\mrxdav.sys mrxsmb.sys Msfs.SYS msgpc.sys mssmbios.sys
  MUP.sys NDIS.sys ndistapi.sys ndisuio.sys ndiswan.sys
  NDProxy.SYS netbios.sys netbt.sys Npfs.SYS netdevio.sys
  ntdll.dll Ntfs.sys, ntoskrnl.exe Null.SYS OPRGHDLR. SYS
  PartMgr.sys pci.sys system32\drivers\pciide.sys PCIIDEX. SYS pcmcia.sys
  PFC.sys portcls.sys psched.sys ptilink.sys PQNTDrv.SYS
  Qkbfiltr.sys qmofiltr.sys rasacd.sys rasl2tp.sys PxHelp20.sys
  RASPPPoE.sys raspptp.sys raspti.sys rdbss.sys system32\drivers\rdpcdd.sys
  Redbook.sys Rtlnicxp.sys s24trans.sys SCSIPORT. SYS spzx.sys
  SR.sys srv.sys swenum.sys SynTP.sys StarOpen.SYS
  Sysaudio.sys tandpl.sys tcpip.sys TDI. SYS termdd.sys
  Update.sys USBD. SYS usbehci.sys usbhub.sys USBPORT. SYS
  USBSTOR. SYS usbuhci.sys vga.sys VIDEOPRT. SYS VolSnap.sys
  w39n51.sys watchdog.sys wdmaud.sys win32k.sys wanarp.sys
  WMILIB. SYS

  * Detailed information from the device (s) *.

  (D) HL-DT-ST DVDRAM GMA-4082N(1:0) for detailed information.

  Identification of the seller: HL-DT-ST
  Product identification: DVDRAM GMA-4082N
  Production revision level: HV02
  Location: atapi, Port 1, Bus 0, Target 0, Lun 0
  Support recording method: DAO, RAW SAO, RAW SAO + SUB, RAW DAO (96), TAO, DAO DVD
  BURN-free technology: BURN-Proof
  Auto-select best write speed: not supported
  -* Note: this information below is provided by the unit, it would be inaccurate. *-
  -* This software does not use this information! *-
  Removable media: Yes
  Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
  Response data format: 02 h
  CD - R read/write: Yes/Yes
  CD - RW read/write: Yes/Yes
  Reading CD - R fixed Packet: Yes
  Write test: Yes
  Read DVD-ROM: Yes
  DVD-R read/write: Yes/Yes
  DVD-RAM read/write: Yes/Yes
  Audio playback: Yes
  Composite Audio and video data streams: No.
  Digital output (IEC958) on port 1 supported: No.
  Digital output (IEC958) on port 2 support: No.
  Mode 1 form 2: Yes
  Mode 2 form 2: Yes
  Multisession: Yes
  BUF: Yes
  CD-DA commands supported: Yes
  CD-DA Stream is accurate: Yes
  R - W supported: No.
  R W-interlaced and answer key: No.
  C2 pointers Support: Yes
  Taken ISRC supported: Yes
  Taken UPC supported: Yes
  Read Bar Code: No.
  Lock media into the drive: Yes
  Currently drive LOCK state: unlocked
  Prevent jumper: No.
  Eject command: Yes
  Separate volume levels: Yes
  Separate channel mute: Yes
  Changer supports the drives present: No.
  Software slot selection: No.
  Side able change: No.
  P to W of introductory part: Yes

  * Source Image/disc information *.
  Type: File ISO Standard image
  Path: C:\Documents and Settings\Rhissa Harouna\Mes documents\
  Name: PANDORA.iso
  Size: 1927,75 MB
  Session: 1
  Track: 1

  Session 01:
  Track 01: DVD, number of sectors: 987008 (1.88 GB), address: 000000

  * Newspaper * dumping/record of progress
  The timestamp of the log file: 2009-04-06 17:09:38
  17:09:38 info processor: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1657 MHz)
  17:09:38 MEDIA by memory available to Windows: 1.038.384 KB
  17:09:38 not enough memory! Adjust the size of the memory buffer à * 256 MB.
  17:09:38 image file of reading from: C:\Documents and Settings\Rhissa Harouna\Mes documents\PANDORA.iso
  17:09:38 DVD Source Info: Session: 1, track: 1, number of sectors: 1.88 GB / 987008
  17:09:55 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): MEDIA by method of writing / speed)
  17:09:55 helio - DAO - 8.0 X (11080 KB/s)
  (D) HL-DT-ST DVDRAM GMA-4082N(1:0) - media format: DVD-R
  17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0) - [write ERROR] LBA: 0, length: 32)
  S:key 03/0 C / 00 - "Write Error".
  17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
  17:10:16 error message [03/0c/00] - write error
  17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
  17:10:16 conference of the e cancelled © image file!
  17:10:19 an error occurred during the procedure of burning!
  Please consult the register and report the errors to technical support.

  I don't know how to solve it please I need help... Thank you

  Hello!

  You can burn discs using another program Nero for example or this only happens with alcohol?

  In your case, I would try to remove the upper and lower filters in the Windows registry. Normally this does not solve the problems with the CD/DVD drive. Just follow the steps described in this workaround from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye

• Satellite Pro A300 - cannot write DVD

  Hi all

  I have a Toshiba Satellite A300 with PIONEER DVD - RW DVRTDO8A; Version 1.54 and after 2 years usingIi FW start having problems with the DVD the DVD because no desire to write.

  Maybe someone can help me?

  Hey Buddy,

  You still use another brand of DVD? Some brands could not be compatible with your player. I made good experiences with DVD-R (not DVD + R) of Verbatim and TDK. Both brands are working well and never had any problems.
  Did you check that?

  What burning software do you use?
  I use CD Burner XP because it s nice and little freeware tool.

• Satellite L500D - can only burn the recovery of 1st and 2nd disc

  I bought this 2nd hand computer laptop in the last two days with the factory default reset. However, I could only burn the 1st recovery disc 2 of 4 using Toshiba Recovery Disc Creator.

  I am running Vista Home Premium SP2 32-bit. I started at F8 factory reset "out of the box" settings that went well. I did where there was a small problem when the previous owner restored to factory settings.

  As he had SP1, I installed SP2. I upgraded the BIOS to 1.1 to 1.4, the latest. I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  Downloads from http://www.mytoshiba.com.au/support/notebooks/satellite/l500/pslk0a-00r009/download.

  I changed to another brand of DVD blank. I have checked and unchecked "Verify" in the Recovery Disc Creator. I also have the latest installed version of the Toshiba disc Creator software. I tried to burn discs 3 & 4 separately overall

  I get no error message, just as the taskbar progress 3rd disc ends never quite at the end. The former owner has never created a set of the factory restore disks. Any thoughts would be appreciated.

  Hello

  to be honest, I have not idea why t he does not burn it. I can offer you:

  1. use a high quality like Dvd - R verbatim media

  > I also installed the latest version of Recovery Disc Creator for L500D, after uninstalling the old version.

  2 maybe, he won't burn with Toshiba disc creator software update. Restore back factory settings and try again with the old version of Toshiba disc creator.

• Satellite Pro M30 - cannot burn CD/DVDs

  Hello!

  Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).

  Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
  Nero version: 6.6.0.1
  Recorder: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected: ATAPI
  CD-ROM: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ-820 s D: CDRom0
  Generic DVD-ROM E: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 74448896 (0) byte
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 510 MB (523184 KB)
  Free physical memory: 228MB (233560kB)
  Memory in use: 55%
  QUERIES PFiles: 0x0
  Static write speed table: 0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2004
  CD-ROM (ISO)
  14:02:51 #1 text 0 file Isodoc.cpp, line 6165
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  14:02:51 text 0 file Burncd.cpp, line 2832 #2
  CARPET * A DVD - RAM UJ-820 S
  Protection against the imbedding of buffer enabled

  14:02:51 #3 text 0 file Reader.cpp, line 127
  Player running

  14:02:51 #4 text 0 file Writer.cpp, line 122
  Writer MATT * A DVD-RAM UJ-820 s running

  14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
  First address writeable = 0 (0x00000000)

  14:02:51 #6 text 0 file Burncd.cpp, line 3117
  Turn on Track-at-once, using CD-R/RW media

  14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
  Last possible write address on media: 359845 (79:59.70)
  Last address to be written: 51106 (11:23.31)

  14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
  Write in overburning mode: No. (enabled: CD)

  14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
  Recorder: MAST * a DVD-RAM UJ-820 s;
  CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
  ATIP data:
  Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
  Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

  14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
  > Protocol of DlgWaitCD activities:
  =========================================

  14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 51107 (51107) original disc POS = #51107 / 11:21.32
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
  --------------------------------------------------------------

  14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
  Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
  -150 | Lead-in | 0 | 0x00 | 0x41
  -150 | 1. 0 | 0x00 | 0x41
  0 | 1. 1. 0x00 | 0x41
  51107 | Lead-out | 1. 0x00 | 0x41

  14:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
  Removed 2 blocks from end of track 1. Length: 51107-> 51105.

  14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
  Caching of files started

  14:02:52 #15 text 0 file Burncd.cpp, line 4003
  Cache writing successful.

  14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
  Caching of files completed

  14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
  Burn process started at 16 x (2 400 KB/s)

  14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  14:02:52 #19 text 0 file Mmc.cpp, line 20673
  Set BUFE: Protection against embedding of stamp-> ON

  14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
  SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
  Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:11 #21 CDR-1106 file Writer.cpp, line 311
  Power calibration error

  14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
  all writers idle, stopping conversion

  14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
  conversion idle, stopping reader

  14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  CARPET * A DVD - RAM UJ-820S\H1 T0

  14:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  14:03:12 #26 text 0 file Mmc.cpp, line 15477
  start closing a Session

  14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
  SCSI Exec, HA 1, YOU 0, LUN 0
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
  Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
  Power calibration error

  14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  14:03:12 #30 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
  Set remaining time: 0:00,000 (0ms)-> OK

  14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
  Burn process failed at 16 x (2 400 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
  File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Here's how I just fixed my misfortunes:

  In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.

  Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.

  (1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".

  (2) to ensure a hard reboot (power off)

  (3) Windows to automatically detect any material it appears after reboot begins

  (4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
  b change of "Ultra DMA mode" "PIO" mode only

  (5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "

  (5) - hard reboot again

  (6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.

  It should then work.

• Satellite Pro M30: Cannot write - DVD SD-R6112

  I have a M30 Satellite with a Player Pro combined DVD - ROM SD-R6112 DVD. The drive is marked as "DVD-R/RW. It will play the DVD without problem, but it will not recognize any blank DVD - RW disc. I've used Nero6 and RecordNow Delux.

  The drive is incorrectly marked? If anyone has had problems similar and, more important still, to find a solution?

  Hi Geoff,

  Your device works properly if you use DVD-R discs? I tried mine using a DVD - RW once and it would not accept the disk until I had formatted (using NERO).
  Using DVD - R blanks I had no problem at all.

  HTH

• Satellite Pro M30: Cannot read DVD on DVD - RW disc

  I have can´t dvd´s read...
  I can burn but when I start to read, it shows me an error like this "E:\ is not accessible. The request cannot be performed because of an i/o device error."

  It s killing me, please help

  Hello

  The IO device error occurs if the drive has a problem with the disc or the configuration of your system (mainly a problem of disc).
  Peut-t DVD player play all DVD or just DVD serious?
  What burning software did you use?
  As far as I know, you should always logged out of engraving.

  Also if you need the DVD Shrink software please check this link:
  http://forums.Afterdawn.com/thread_view.cfm/192015
  http://forums.Afterdawn.com/thread_view.cfm/244972

  http://Forum.Digital-Digest.com/archive/index.php/t-45081.html

  Good bye

• Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

  I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
  He tells me to update the video driver or install a new video card.

  I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

  Someone had this problem? How did you solve this problem?

  Thank you.

  First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
  I put t know if you use a graphics driver right but necessary for correctly working Vista.

  The user Scooby1966 has posted a nice Vista tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

  By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app

• Satellite Pro L300 - cannot use Intel ProSet WLan tool with Win XP

  Hello! I have the same problem. I installed a XP SP3 and I can't use the * Fn + F8 * hotkey to activate the WLAN function on or off. Other Fn keys work correctly. The WiFi network also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work. It seems "no wlan driver installed. The card is a Realtek 8187 B, downloaded the driver on Toshiba support original site. What can I do?

  > WLan also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work
  If the WiFi works fine using the windows zero configuration then the WLan adapter is enabled and don t get the FN + F8.

  The fact is that your 3rd party WLan configuration tool doesn t work because your wireless network card is * Realtek! *

  Intel ProSet ONLY works with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have an Atheros Wlan card.

  You have Realtek so use windows own zero configuration WLan!

• Satellite Pro C850 - missing Recovery Media Creator

  I recently bought a C850 Pro Satellite and, after update to Windows 7 and everything defining the way I like it, I tried to create a recovery media.

  However, when I click on Recovery Media Creator in the programs, the file 'TRMCLcher.exe' is not found. In fact, I can't find anywhere on the computer.

  In the directory C:/Program Files/Toshiba/Toshiba Recovery Media Creator, there is an app called "toRDC.exe" but it does not.

  Someone has ideas how to get creator of Meda recovery to run? D rather avoid the hassle to use the recovery option of hard drive partition to return to factory settings if possible, especially as I doubt m Recovery Media Creator works even in this case, I have seen ve not deleted or modified files with the program.

  Grateful for any help, thank you.

  Take a look at this page:
  http://www.MyToshiba.com.au/support/computers/Satellite/Pro/C850/pskc9a-00t019/download?OS=25

  Here, I could find the Toshiba Recovery Media Creator for Win 7 64 bit for download.
  Of course, if you need 32-bit version, you must change the settings in the upload form.