Satellite Pro M series media keys

Similar Questions

• Satellite Pro L Series - lack of strikes

  I have a Satellite Pro L Series with keyboard, mouse, etc. connected via a Toshiba "USB 2.0 Port Replicator II". When I use the keyboard, occasional keys are ignored (so I have to go back after you type anything to insert strikes ' % is). Also, from time to time a key combination is repeated constantly until I intervene to stop it.

  This does not occur when I use the computer without the port replicator, so the problem seems to relate to the port replicator itself. EDT doesanyone experience a similar problem, or ideas on how to fix it?

  The USB keyboard is maybe defective. Have you tested on another PC?

  Bad drivers can also cause. If you have installed drivers/utilities keyboard, or a mouse Logitech/Microsoft/other, uninstall them. They may be in conflict with the default drivers.

• Satellite Pro 4300 series - is there an available wireless card

  Hi all

  New to this forum I bought an old laptop Toshiba Satellite Pro 4300 series recently as a starter machine for my son. The computer is currently connected to the internet using 3Com Megahertz 10/100 LAN PC Card PCMCIA 3CCFE574BT with dongle connected through hub speedtouch.

  Can someone tell me if there is a PC wireless card that I can use with this machine without having to connect wires in the hub.

  See you soon

  Hello

  As far as I know, the machine does not support the Wlan and has not been equipped with all Wlan cards.
  If you want to connect the computer to the WLan router then I would recommend using a USB WiFi key that would be the simplest solution.

  There are different sticks USB Wlan that supports different Wlan standards; 802.11 B or G, you must choose one that is compatible with your WLan router.

  See you soon

• With Satellite Pro M-series LCD projector problems

  Hello

  I use a Toshiba Satellite Pro M series for more than a year. I would like an answer to a problem that I've had since I bought my laptop. When I use a LCD (beemer) projector to watch movies on the big screen, he seems to be a problem. When I choose to show my desktop on screen you there is no problem. When I open a video file, divx or just a DVD I can see the movie on the screen of my laptop, but I don't see on the projection screen. It is only black. When I choose the mode full screen, there is always the same prob. Very strange because when I chose the projector as 2nd screen and I slide the film into the second screen, I can see the movie on the projection screen. The only thing that I hate divx and mediaplayers readers when you select full screen on the second screen, the film jumps on the first screen (the one on my laptop). I tried all the codecs and other things. Nothing seems to work.

  Has anyone treats these problems before? Please let me know if anyone knows how to solve this problem.

  Kind regards
  Compton

  Hi refill,

  I thinnk it may be a driver configuration problem, but to solve it, I need to know what mobile phone do you use?

  Satellite Pro M?

  Also would be nice to know what operating system is runing (OS recovery or another image) and what version of driver display that you use!

  Goodbye Chris

• Satellite Pro M30 series deactivates the WLan connection

  I have an old Satellite Pro M30 series. Whenever I turn on the wireless signal, the computer closes its doors.
  I assume that the driver's latest version.

  I'm not known for that Yes, there is someone out there who can advise me on where to find the latest driver and install it.

  Assuming this is the problem.

  Thank you
  Gibbsey

  > spend a lot of time on the wireless signal, the computer closes its doors.

  What do you mean exactly by farm down?
  The laptop turns off automatically once the WiFi (switch) card is turned on?

  I put t think this would cause obsolete WLan driver, this sounds like a hardware problem.
  In case it of not possible to use the internal WiFi card, I recommend to use an external USB WiFi dongle.
  Would be the best option

  PS: all the drivers for old Toshiba laptops are placed on the page of the Toshiba UE driver.
  You will need to search the archives (in the product Type click Archive) for a list of the old series of laptop computer.

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• Satellite Pro 4300 series installation of Windows 2000 Professional

  Hi guys!

  I was given a 2nd hand Satellite Pro 4300 notebook PC series of my brother. Its shows be quite slugglish (over the start time of 20 minutes). I think I'm a format and a new installation of windows 2000 (windows 98se running sound) may be useful. However, I don't have the original recovery disk, although I own an original copy of Windows 2000 Professional.

  Would it not be possible to do a full format and install windows 2000? Or would I meet problems, for example with driver problems, later? I know computers cell phones can be a bit of a nuisance when it comes to facilities OS!

  Any help and advice would be much appreciated!

  Thank you!

  FONZ

  Hello

  Your machine should work very well with Win2K - Toshiba have drivers available for download.

  Kind regards

  Nick

• Satellite Pro C850-15N - some keys do not work.

  Am 90 per cent positive that this is not the fault of a broken keyboard keys do seem loose and work very well for a while.*
  --
  Basically, the other day I noticed the keys 3 and 5 were not work next to the f3 key (meaning I now have to go into the settings of brightness, whenever I want to increase it). I thought "I'll just reboot and see if that fixes anything" and he did... temporarily. I have to restart every time that I've lost the ability to use these keys, but now it does nothing.

  There is no update which should install Windows (updated 8.1 update 1 recently).
  There is no update options the keyboard driver (the box is grayed out).
  There is nothing stuck, they seem not damaged or less they touch.

  The features of my laptop;
  Name of the operating system Microsoft Windows 8.1
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of HOUSE system
  The TOSHIBA system manufacturer
  System model SATELLITE PRO C850-15N
  System Type x 64-based PC
  SKU PSKC9E-01J00JEN system
  Processor Intel Core i3 - 2328M CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde Corp. 1.60, 27/06/2012
  SMBIOS Version 2.7
  Embedded Controller Version 1.70
  BIOS Legacy Mode
  ---
  * I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - seems to me later for my model, such as the toshiba site list any keyboard updates.*
  ---
  I also grabbed the driver files if this will be of no use at all:
  PS/2 standard keyboard
  C:\Windows\system32\DRIVERS\i8042prt.sys
  C:\Windows\system32\DRIVERS\kbdclass.sys

  ---
  Can anyone give me any help? I'll buy a USB keyboard in a few weeks anyway, but for now, it's really annoying not being able to use these keyboard shortcuts: P

  > I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - I seem to have the most recent for my model, as from Toshiba Web site does not list the keyboard updates.

  It seems that this opinion is not from Microsoft staff, but some users of the forum.
  You should know that the drivers of keyboard (developed by Microsoft) are still part of the Windows System. Any Windows OS you use, the keyboard driver would be always installed as part of the OS. This means that the drivers of special keyboard DON T exist but system uses own driver...

  You can check the functionality of the keyboard in USB external keyboard.
  If external keyboard works properly, the internal keyboard is malfunctioning and must be replaced.

  If the external keyboard does not work properly too, then I recommend you to recover the laptop using Toshiba HDD recovery. Otherwise, there could be question of motherboard (keyboard controller).

• History of models Satellite Pro 4300 series to present date

  I have four portable Pro - two 4200 series and two Satellite 4300 series. I would like to have an idea of how many models back they are the current range of SP (I know they are about 6/7 years old). What models came after the 4300 series (and in what order?) Was there a series 4400 etc.? I saw the 4600 series models, but that came after them so far?

  Also, can someone explain in simple terms the different designations in the current range of SP - I find very confusing. There seems to be'm ' models, 'A' models models 'L' and 'P' - it's all very confusing, but I don't know there must be a logic diagram of these designations - it's just that I've not yet spotted!

  Can someone explain in layman's terms please? Finally, when deciding on a replacement for my aging PC-4200/4300 units, docking station is important. Anyone know what models in the Toshiba (not only range SP) range have a capacity?

  See you soon.

  Hi Steve

  I put t know if I can give you a precise answer, but I'll give my best. First of all it is important that the description of the SP series is slightly different and it depends on what country it was produced. For example, MS 4200 and 4300 is listed as a model for the Canada. For the American market, there are for example 4320, 4340 and 4360. For Europe 4310CDS, CDT 4310, 4320 CDT, 4330CDS and 4340CDT models. As you can see that the description of the model is not the same.

  I put t know how models SP are designed up to now, I found info on some of them:
  -Canada 4600, 6000, 6100, M10, M40 and M70
  -Europe 4600, 6000, 6050, 6070, 6100, A10, A30, A40, A60, A100, L10 - C, P - L10, L20, M10, M30, M40, M40X, M70 and P100.
  American models are not known to me, but try to see the Toshiba U.S. page.

  Description C means that the unit has CPU Intel-Celeron-M.
  Description P means that the unit has CPU Pentium M (Centrino).

  Docking station capacity - Satellite Pro (not all models) and portable series business Portege Tecra (all models).

  That's all I know abut that. Forgive me if I forgot something.

  Good luck!

• Satellite Pro A120-10W - function keys not working not not from the cloth of hard drive

  Hello

  I have a Satellite Pro A120-10W under Windows XP Pro SP3, and just had my hard drive erased, because of virus. Everything seems to work fine, but I can't use function keys to change the brightness etc. I looked in various forums help however most seem to give answers for Windows 7 or vista. 7
  Can someone please?

  Thanks in advance.

  Hello

  As you can see in other threads, you need special drivers/tools for the keys FN get their work because there is no standard Windows driver for these keys.

  In any case, you must download the common Modules like Akuma wrote. After installing the key should start working again.
  You can download the tools on the official website of Toshiba.

  If you have problems with the installation or it succeeded, just after a few comments. ;)

• Satellite Pro L500 - press Fn key blocks the laptop computer to blue screen

  Hi all
  First post so please ask if I did not include all the necessary information.

  I have the Satellite Pro L500-1TX (Win 7 32 bit os) and everything worked fine including the Fn menu drop-down button.

  Now, whenever I press the Fn key, it blocks the laptop to a blue screen. The computer then restarts automatically and that it was an unplanned shutdown offers the usual safe mode option.

  Unfortunately, I do not know when this started as I do not use the fn often hesitate so just do a system restore. I don't know how far back to go. It was several weeks before I associated accidents hit the Fn key.

  Any suggestions as to which Toshiba drivers may need to be reinstalled. The computer otherwise works fine.

  Cheers in advance
  MTV

  Great! Thanks for this feedback that I also found other threads about Support Flash Card utility and it is the tool command keys FN so read the forum in other threads contributes without doubt! ;)

• Satellite Pro A120 - error function keys not working and affected

  I have a Satellite Pro A120 PSAC1E-04Q00VEN.

  A couple of weeks, I started to have a dialog "Error of TouchED" to come to the start box (containing the message: 'Thotkey' recovery has no code error 0 X 00031402, 0x00000002) and at the same time the function keys did not work.

  I spent several hours as a result of the wide variety of questions that have been posted on this forum and elsewhere regarding this problem with computers laptop Toshiba, but nothing has worked. I reinstalled all the drivers from my initial backup disk, installed new drivers on the Toshiba site, updated the bios and restored the system to date before the problem started to occur. I also can't find Thotkey.exe everywhere on my machine.

  Can anyone help with this? It seems to be a common problem, for which he doesn't seem to be a definitive answer. Any useful response would be really appreciated.

  David

  Hey Buddy

  Go to the page of European driver of Toshiba.
  Select your laptop model and download and reinstall the tools and the following drivers:
  -Common module
  -Utilities for display devices Hotkey
  -Utilities
  -Wireless keyboard shortcut

  Check it out!

• Satellite Pro S500 - Recover Media Creator does not start

  I got a new laptop Satellite Pro S500. After the initial Setup, I have Windows 7 64-bit work. I wanted to create the recovery media, but the process fails.
  Having started the "Toshiba Recoverx Media Creator', I get a dialog box where I can choose the language for the recovery media. My language is German. So I select German and press OK. For a few seconds, there is an another dialog box with a text "Please wait...". "and after a few soconds, it closed. Nothing happened.
  Any other language in the first dialog box setting cause the same behavior. Even tried in Windows safe mode, but still the same.

  Is there a log file?

  Any help is appreciated

  Hi Caramel0,

  This recovery media creator dialog box does not know me, you can post a screenshot of the error message? This would be interesting.

• Strange keyboard issue on my Satellite Pro laptop series

  Hello

  I have Satellite Pro with Vista. I am forced to use the keyboard to the screen because of weird problem. Sort key number 2 is to type continuously; I have to press Fn + F11 to stop this. even in this case some other keys like w, x, c, m, n, which are not the number keys don't work (even without the Fn + F11).

  This made it impossible for me to do a job. I bought my laptop online so I put t remember to receive a recovery disk.
  Any help will be much appreciated.

  Thank you.

  You have newest Satellite Pro A300 laptop?

• 0201: failure IDE #0 - Satellite Pro M series

  I can't believe it's not searchable on this site given it a lot of mentions on the net... I certainly can't find an answer here already sorry for asking again.

  Former Pro M series had to put the new disk in hard, however while I start drives Toshiba (weird that his able XP but the discs are for 98?) or I can run the XP installation and format the drive when it restarts after first installed files or not with an installation disc boots, I get

  0201: failure IDE #0

  What should I do to the drive to get the laptop to boot from it, weird how it can be seen by the Setup program and files written on it.

  Thank you.

  Hello

  There are two IDE controllers:
  0-> HARD DRIVE IDE
  1 IDE-> ODD (optical disc)

  It seems that something is wrong with the device connected to the IDE 0 designates the HARD disk.

  If possible, try to start the device using a Ultimate Boot CD to test the HARD drive, or run Chkdsk c: /r from the recovery console to attempt to recover bad sectors.
  You can also try to start once more the Win XP disc that contains the option fix (while the installer must press R for repair console)