Satellite Pro M10: Questions of undocking Port Replicator II

Similar Questions

• Satellite Pro M70: Question on the port on the left hand side

  Another question regarding the Pro M70 PSM75E, next to the hard drive (left side) there is a port which you can take off. I took it of and it looks like a chip grafx or something: s someone with the M70 not what it is.

  Thanks again

  Hello

  Well, there are of many Satellite Pro M70. It s a great series.
  But for example Satellite Pro M70-110 has a PCMCIA Type II slot.
  You can use the different PCMICA card in this slot. But they must be compatible.
  I guess this slot machine, you found a plastic Board. This is only for security.

  However, if you want to learn more about your device, I would recommend reading the user manual which must be preinstalled on your laptop. You will find very, very, very ;) useful information.

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite Pro M10 attempted to upgrade processor

  Hello

  I tried to upgrade cpu original 400 fsb 1.4 mhz centrino centrino 1.6 mhz 1 MB cache 400 fsb cache 2 MB (SL7EG), it works but only the minimum frequency (+-670 Mhz), it remains each time to the lowest frequency even if a lot of work is invited to the cpu (tried a lot of cpu stress tools).

  I really don' t know how solve this problem... can someone help me please?

  Bios version 1.50, version of the firmware 83,72, 23/05/2003 date of the bios.
  Thanks for advantage

  NB: only in documents from toshiba, the CPU seems to be fully compatible with Satellite PRO M10

  Hey Buddy,

  Just a quick question: you know that upgrading the CPU is not supported by Toshiba?
  With other words, it means that no one can tell if another CPU works correctly, and if you can use the higher speed.

  I guess if you can use t as the higher speed, the CPU is not taken in charge and that s a limitation of the card motherboard/BIOS.

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• HARD drive external for Satellite Pro M10

  Hello!!

  I would buy an external USB HDD to my computer, but I don't know if I can buy anyone. USB 2.0 is not, but I think that only touch the speed of transfer, no?

  BIOS version 1.50

  I find this HARD disk, it'll work?

  http://www.Maxtor.com/portal/site/Maxtor/MenuItem.6adb6b8313633595062e6be791346068/?channelpath=/en_US/products/external%20Storage/Maxtor%20Basics%20Family

  Thnx

  Hello

  Satellite Pro M10 certainly has USB 2.0 ports, firewire, and IrDA interface. The operating system uses a standard USB Windows driver.
  I put t see any problems with the use of the external USB HDD.
  It should work.
  But in my opinion, you should buy an external USB HDD that supports an IrDA interface. It s much faster as a USB connection.

  However, the operating system must be able to handle the 250 GB external HARD drive

• Satellite Pro M10 HDD Upgrade - how will work?

  Hello

  I have a question I have a Satellite Pro M10 (PS630E-G207W-GR) and I want to change the hard drive to a 120 GB + HARD drive so I called the Supporthotline because I need the Windows CD and they mean that would work with a new HARD drive, because the Bios does not the new HARD drive, and he was not told why. Now the question is, if it works with an update of the bios, or if maybe there is already a person here with a working 100 GB + HDD from the laptop.

  and sorry for my very bad English

  Hello

  If you are not satisfied with the answers provided by the support, you can also try to communicate with several independent services for hardware upgrade. As far as I know, they are able to manipulate the BIOS to work with hard disks are not supported. Maybe this solution is for you.

  At least on this forum, you can find topics where users of laptops repost on an improvement of HARD drive (more than 100 GB) successfully with older models as your M10. You can order 120 GB of HARD drive and try to use it. If this does not work you can send it back. To do this, you have about 14 days. Test it!

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Help for Satellite Pro M10 RTC CMOS battery replacement

  I have a Toshiba Satellite Pro M10 PS630E-G206C-FR
  Removing the main battery causes a failure message from RTC battery from the beginning to the top and loss of CMOS date/time.
  I tried to charge my main battery in full and then leave the machine in charge while it is turned on (I said it is a method for the CMOS battery)-without any result.
  .
  My questions: do I have to replace the RTC battery (ie: is it refillable welded or a CR2032 battery shows or similar).
  If a specific type, the best source?
  And also, where it is (I'm comfortable with disassemble my laptop having replaced the LCD cable already)
  Thank you
  David

  Hi David

  Do you need help? What you mean exactly, step by step disassembly procedure? Maintenance manuals are not public documents and I'm really interested if anyone can offer assistance to you.

  When you want to swap the portable RTC battery almost entire must be dismantled. Believe me that is not the procedure of 10 steps and to do something like this, you need the disassembly instructions. I recommend you to check how it will be service charges because that when they disassemble the laptop they can clean at the same time and the laptop will be as good as new.

  If you want to do it yourself, it is very important to use authorized by Toshiba replacement batteries or real. Battery wrong installation may cause a battery explosion, or other damage.

  Please be careful about this.

• Screen LCD Satellite pro M10 max resolution.

  Hi, sorry for my bad English, my question is:
  Satellite pro M10 laptop internal LCD max resolution is 1024 x 768? excluded you superior resolution with scrolling?

  I read in the specific techniques of my laptop max internal resolution is 1280 x 1024 is not really?

  Thank you

  Hello

  As far as I know that the display resolution depends on a view controller
  I found this information in the user manual. The following models are available:

  -14.1 XGA with 1024 x 768
  -15.0 XGA with 1024 x 768
  -15.0 SXGA + 1400 x 1050
  -15,0 UXGA with 1600 x 1200

  I think that in this case, your device has a 14.1 or a 15.0 XGA display controller. Well well, in my opinion it s all right with your laptop. Enjoy it :)

  Good bye

• Re: Satellite Pro M10 - strange Boot problem

  Hello.

  My Satellite Pro M10 has developed a strange problem. It will power with its installed hard drive.

  The yellow light beside of the plug symbol starts flashing. When there is no hard drive not connected, or another hard drive from another trendy laptop it starts fine?

  Please help, thanks in advance,

  Destro

  I don't know how to help you. HARD drive changes and everything will be ok.

  Is - this original hard drive that you got with your laptop?

• How to remove the password of BIOS on Satellite Pro M10

  Hi guys,.

  I searched all over the web to find an answer, but has no success. So I really hope one of you can help out me.

  I have a very old Toshiba Satellite Pro M10 with 512 MB in it. The laptop is protected by a BIOS password that I know. However, the problem is that I want to remove the password of BIOS completely. I know this isn't a big deal, but I find it annoying to type the BIOS password over and over again. Mostly because I am preparing this old lady for my oldest daughter. Furthermore, I just installed Windows 7 and it works well, but I have all the original software Toshiba, for example the HW configuration utility. I expect the download somewhere on the net, but unfortunately this is not as simple as that.

  Any help is appreciated!

  Thank you

  Jeroen

  Hey Buddy,

  It is easy to remove the BIOS password. Follow the instructions posted by Al - eX.
  As new password just enter anything and then the password is removed.

  I m wondering that you have installed Windows 7 on Satellite Pro M10. It is a very old book, and in my opinion Windows XP would be the best choice.
  In addition there are no downloads available for this model and Windows 7 on Toshiba page

• HDD upgrade on Satellite Pro M10

  Hello

  I want to exchange the hard drive of my Satellite Pro M10. Can someone tell me what drives can I use? On ebay, I found a disk HARD 160 GB fot this model, but in the manual they talked only about 30 GB, 40 GB or 60 GB HARD drive.

  Thanks for any help!

  Your old laptop IDE interface for the connection of HARD drive, so I think you can use max 120 GB HARD drive.
  It should be enough for this oldie? Do you agree with me?

• Satellite Pro M10: image on the screen is very dark

  I have a portable Satellite Pro M10, which has a black screen, i.e. the backlight does not work. There is an image on the screen, but it is very dark. When you connect an external monitor, I get a normal picture on this screen.

  Information from other messages here, I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but it does not solve the problem. If I bring the laptop to a service center how much it will cost about for repair? The thing is 2-3 years, so if it is very expensive I could better get a new laptop.

  I'm sure I'll be able to change the inverter Board myself, but how am I going to be able to determine that the inverter is the problem? How to get a new inverter? Is anyone of you know the number of good product?

  My Pro M10 itself has PS630E-G205Z-OF product number.

  Hello

  I agree with Tobi. You sounds description as a faulty FL inverter.
  This part is placed behind the LCD screen under the lid.
  As mentioned this part isn t very expensive and you could order the partner of Toshiba service in your country. But be aware that if you have no experience of replacement if you ask technicians for assistance.

• Satellite Pro M10 displays the characters currupt at startup

  I have a Toshiba Satellite Pro M10 that collapsed. When the system boots, the Toshiba logo seems to have a few points here and there. When displaying messages on the screen during startup, the characters seem corropted. For example, the message "Insert system disk", I and T of the insertion of the word seems to be half upper ASCII characters. The system S is the "less than or equal to sign." and the k of the scratch disk is {.} I already did the following:

  -tried to start with one of my two memory card and I tried the two memory cards.
  -swapped my memory card.
  -reloaded windows and Linux

  I have dropped it once but worked OK for a month after I dropped it. I deleted the operating system, but now seems to have problems to load a CD operatig system (CD works OK). Anyone have an idea what is wrong?

  Thank you
  Peter Loo

  Hello

  You suggested that the cell phone dropped twice.
  Well, you can try to connect the external monitor to the laptop to see if it s a screen failure or malfunction of the graphics card.

  You have problems with the installation of the OS? Maybe there's something wrong with the disk and the HARD disk. But maybe only loses connection is responsible for the problems. Check the pins.

  It is possible that the screen and other devices was damage due to falling down.