Satellite Pro M10 suddenly stopped starting or to reach the POSITION

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite Pro M10 does not start

  My M10 Pro Sat will not start.
  Power cable shows a green light and a light orange constant and nothing else, but does nothing when the network is not pluged.

  Any suggestions? With our thanks.

  I put t know if this will help you, but what you could do is the following:
  -Unplug the power adapter, remove the battery and wait about 30 min
  -then reconnect the two parts and check to see if you can power the laptop

  It helped me in the past and maybe it will help you too.
  Otherwise:(bien, puis vous devrez contacter le technicien de l'ASP pour la vérification de l'ordinateur portable)

  Welcome and good luck

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

• Satellite Pro M10 suddenly ran very slow and freezes

  Two weeks ago, that my SP M10 is suddenly very slow and freeze. After a reset, it began to check the HARD drive, which lasted about 8 hours, and several repair lost clusters to files. But the student pilot did not run faster. I reformatted the HDD to FAT32 (NTFS has not worked) and reinstalled Windows XP. First, it seemed to work very well, but a few hours later, it freezes again.

  After 10-20 min, I got access. This has not changed so far. CHKDSK another also lasted several hours and again showed some lost clusters. I think that my HARD drive is damaged, but how can I see if there a lot of bad sectors? Can I fix it? Can I possibly replace my 40 GB HARD drive with a larger HARD drive capacity?

  Are there restrictions or can I use any brand?

  Hello

  I had the same problem with my Satellite 1900. The result was the HARD drive damaged (bad sectors). I tried to fix it with different tools, but without success. The best solution is to swap the HARD drive.

  Good bye

• How to remove the password of BIOS on Satellite Pro M10

  Hi guys,.

  I searched all over the web to find an answer, but has no success. So I really hope one of you can help out me.

  I have a very old Toshiba Satellite Pro M10 with 512 MB in it. The laptop is protected by a BIOS password that I know. However, the problem is that I want to remove the password of BIOS completely. I know this isn't a big deal, but I find it annoying to type the BIOS password over and over again. Mostly because I am preparing this old lady for my oldest daughter. Furthermore, I just installed Windows 7 and it works well, but I have all the original software Toshiba, for example the HW configuration utility. I expect the download somewhere on the net, but unfortunately this is not as simple as that.

  Any help is appreciated!

  Thank you

  Jeroen

  Hey Buddy,

  It is easy to remove the BIOS password. Follow the instructions posted by Al - eX.
  As new password just enter anything and then the password is removed.

  I m wondering that you have installed Windows 7 on Satellite Pro M10. It is a very old book, and in my opinion Windows XP would be the best choice.
  In addition there are no downloads available for this model and Windows 7 on Toshiba page

• Satellite Pro M10 cannot start properly - AC LED flashing orange

  Hello

  I have a weird problem that I can't solve.

  (1) when my Satellite Pro M10 the plugged AC adapter and the battery, the AC led is green and battery led is orange.
  (2) when I try to turn it on, several times it not light and the dissepear of leds for 1 or 2 seconds and my AC led flashes orange. Sometimes it lights up as it should be.
  _________
  When this problem occurs, it will take a lot of time before it turns normally. I searched the internet for a solution, but I couldn't find one.

  I already removed the battery and try to turn it on, but it does not solve the problem. Or when I remove the AC adapter and try to start it on the battery itself.

  I also removed the two of them and you press the button power on for 60 seconds. After that, it will sometimes start with mains or battery adapter.

  My bios is updated to the latest version. (I've done this when he started only five minutes ago, but the problem is not resolved). I also believe that when the m10 is enabled and when I close it, it crashes also.

  Do anyone know how to solve the poblem? Thanks in advance.

  Hello

  These problems are very rare and shouldn't t happen if hardware or software is ok.
  Power LED blinking orange means there could be a hardware malfunction.
  It is a code flashing microphone and a technician can be read.
  This code must be translated into the hexadecimal digit.

  But for ordinary users it s not able to know what it means. In my opinion a power electronic malfunctions and must be verified by an ASP.

• Satellite Pro M10 - starting problems

  Hello

  I have a Satellite Pro M10, only 2 years old, but has big problems at the start line.

  The message that appears when you turn on it is:

  'Intel(r) Boot Agent FE v4.1.09
  Copyright (C) 1997-2002, Intel Corporation
  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready... »

  Now, I talked to a few people and they all say I need a new drive hard etc., but I don't see how replace you it as it looks like it is built in instead of something that can be drawn.

  Also I don't have a system disk, and the guy who provided it has decided not to return my emails?

  Can anyone help please?

  Chris

  Hi Chris,

  It is possible that this notebook you trying to boot from the CD rather than the hard drive. Check in your BIOS settings to make sure that the boot order is correctly specified as HD first. I would not recopmmend change the hard disk at this stage, since it would mean having to restore your system from a recent backup (if you have a) or re-installing the CD recovery.

  HTH

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• Re: Satellite Pro M10 - strange Boot problem

  Hello.

  My Satellite Pro M10 has developed a strange problem. It will power with its installed hard drive.

  The yellow light beside of the plug symbol starts flashing. When there is no hard drive not connected, or another hard drive from another trendy laptop it starts fine?

  Please help, thanks in advance,

  Destro

  I don't know how to help you. HARD drive changes and everything will be ok.

  Is - this original hard drive that you got with your laptop?

• Satellite Pro M10 displays the characters currupt at startup

  I have a Toshiba Satellite Pro M10 that collapsed. When the system boots, the Toshiba logo seems to have a few points here and there. When displaying messages on the screen during startup, the characters seem corropted. For example, the message "Insert system disk", I and T of the insertion of the word seems to be half upper ASCII characters. The system S is the "less than or equal to sign." and the k of the scratch disk is {.} I already did the following:

  -tried to start with one of my two memory card and I tried the two memory cards.
  -swapped my memory card.
  -reloaded windows and Linux

  I have dropped it once but worked OK for a month after I dropped it. I deleted the operating system, but now seems to have problems to load a CD operatig system (CD works OK). Anyone have an idea what is wrong?

  Thank you
  Peter Loo

  Hello

  You suggested that the cell phone dropped twice.
  Well, you can try to connect the external monitor to the laptop to see if it s a screen failure or malfunction of the graphics card.

  You have problems with the installation of the OS? Maybe there's something wrong with the disk and the HARD disk. But maybe only loses connection is responsible for the problems. Check the pins.

  It is possible that the screen and other devices was damage due to falling down.

• Satellite Pro M10 overheating and the fan runs loud

  I have a Satellite Pro M10 and when it is the fan on the power grid comes shortly after the start and makes a horrible noise - this has only started happening recently. I tried spraying compressed air (dust) to the air outlet and still have the same problem.

  Other postings say to clean the fan, but I don't know how to access it. I'm worried about overheating problems I work in Africa much of the time and the laptop is subject to hot temperatures.

  Hi Hannah,

  The easy way to clear the dust and debris from the cooling system is to use a vacuum cleaner hose placed on the admission air grids that are usually in the bottom of the laptop (covered by a grid). For maximum effect, I usually place a rag around the pipe to maximize the flow of air through the fans.

  This causes air suction through the radiator CPU the wrong way and ensures that all debris are not pulled into the heatsink, but are removed by fans. You can see a ball of down under the grates that you need to try to clear little by little.

  This technique will not void your warranty since no disassembly of the unit is necessary.

  Kind regards

• Satellite Pro M10: yellow (!) near the VGA controller

  Hi all

  When I start my computer I get a yellow exclamation at the bottom right saying hardware not found: VGA (video controller).

  The computer works fine, but won't play videos.

  I looked through the Toshiba drivers, using search terms "VGA", "video controller" and "Graphics", does not. I installed a driver "chip set", but that has no effect.

  I used automatic updates from Microsoft, but again, no help.

  My system is:

  Toshiba Satellite Pro M10
  Windows XP
  Service Pack 2
  Pentium clocked at 1.3 GHz
  I also have a nVIDIA sticker on my laptop that I find to do with the video play stuff

  Any help would be greatly appreciated; This driver to install and where to find it.

  Muchos gracias,

  Doug

  I hope that the link posted by the previous user will help you, but in the future, please use this page http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp to download all the drivers, tools and utilities you need.

  Good bye

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.