Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

Similar Questions

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

  I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

  Thank you
  Simon

  Thanks for your comments!

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• LR - CC does not work after installation with creative cloud. I run a W7 64-bit system

  Hello

  LR - CC does not work after installation with creative cloud. I run a W7 64-bit system.

  I got LR 5.7 running and is not installed by the CC.

  What to do

  Thank you.

  Hi Ridder,

  Please visit the solutions proposed in the following article.

  Lightroom does not launch or closes automatically after the splash screen

  I hope this helps.

  Kind regards

  Sumit Singh

• Touchpad does not work after the removal of the Satellite U400-18F

  Hello

  Yesterday I disassembled my Toshiba Satellite U400-18f to clean dust fan, I unplugged all the cables except the cable touchpad I tried to pull up, but nothing happened, so I went back just as it was before.

  My laptop worked fine except the touchpad does not work!
  So please someone know how to unplug this cable so I can fix it...

  http://img841.imageshack.us/img841/4549/removetopcover17.jpg

  Thank you

  There must be some problem with contact. I recommend to unlock touchpad wire, put it back in place and simply lock again.

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Satellite C855 - 1 HM-Touchpad does not work

  Hello

  My touchpad does not work! indications are he should be, pilot the newest, toggle F5 etc. Any ideas as to what may be wrong welcome. Machine is also only a few weeks, how do you contact technical support?

  Thank you

  Hello

  You can contact the Toshiba authorized service partner in your country, your hardware is defective.
  But you should first check if its hardware problem.

  First of all, you should check if the touchpad (pointing device) is enabled in the BIOS
  Press F2 during the powering of the device and go to the Advanced tab-> the system setup
  You will find the touchpad power option.

  If the touchpad is enabled in the BIOS, I recommend to check the touchpad system settings: Control Panel-> mouse-> last (Advanced) tab-> Advanced button

  Last but not least you should recover the laptop to test the device with factory settings.
  If all these tips would not be successful success, well, then I recommend to ask the guy to service

• 350 laptop G1: Touchpad does not work after open the cover.

  Whenever I close the lid, when I open again the touchpad does not work.

  I have to restart or put the computer to sleep in order until the beginning of touchpad working again.

  I solved my problem!

  I have unistaled the driver PS/2 Synapatics 19.0.12.95

  Thouch pad suite to work without the driver and now I finally can close the lid and open it again and use the touch pad immediately.

• Z410 Touchpad does not work after upgrade to Windows 10

  Hello

  I have the Z410 (2 years) and since the upgrade to Windows 10, the TouchPad does not work!

  • I updated the driver with no luck to make it work.
  • Solutions used Lenovo Center, digitised material and nothing shows a hardware or driver missing.
  • In Device Manager it shows any missing material.
  • Settings > devices > mouse & Touchpad... The touchpad tab shows her where this versioned (Alps Touch Pad - 8.201.1611.252)

  Any tips?

  
  

• Re: HP laptop touchpad does not work after uninstall of kaspersky anti-virus (version of windows 7 32)

  Hello when I removed Kaspersky Antivirus, my HP 110.3135DX notebook touchpad does not work (Windows 7 in 32 version). can someone help me solve this problem?

  Hello

  Try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with Networking" and press ENTER.  When it has loaded, download driver Synaptics following, and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49601.exe

  Once finished, click on the Start Menu, open windows control panel, open programs and features, the Synaptics Pointing Device driver right click and choose uninstall.

  When this has completed, restart the computer and let Windows load normally, then open your Downlads folder and run the installer downloaded Synaptics previously - when it is finished, restart the laptop.

  Kind regards

  DP - K

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Satellite C870-155 - the Touchpad does not work

  I have a Satellite C870 - 155 (PSC8AE) and problems with the touchpad.

  The buttons work, but not the pointer/trackpad.

  The laptop was in need of a replacement hard drive, and I don't have any recovery media. I'm running a new installation of Windows 7 (Home Premium, 64-bit) vanilla.

  I installed all the drivers, that I can find (including the touchpad).

  I tried pressing F5 / Fn + F5, but this does not change anyuthing that I can see.

  I am running the latest version of the BIOS I can find (6.60).

  Any suggestions?

  > Everything seems to work except the pointer.
  I guess that s hardware problem and the touchpad module must be replaced.
  I m straight probably because if the touchpad would be disabled or drivers that would be misunderstood, the touch area AND the touchpad buttons would not work.

  In your case touch ONLY area/pad does not work, but the buttons

  But just to be sure: go into the BIOS (F2)-> Advanced tab-> the system setup
  Here you can check whether the pointing device (touchpad) is enabled.

• Satellite L50-B-211 - Touchpad does not work

  Hi I have a question

  We just bought a Satellite L50-B-211, but the touchpad is not working properly.
  Move the pointer autour is no problem, but the buttons do not work.

  Using the buttons does nothing, left or right clicking has no effect?
  If I want to get the properties of a file right-clicking does not work?
  (two fingers press work)

  The hardware is correctly installed, there is no problem in the configuration of the device.

  Do I have to return the device (before installing our software / config the device to our needs)
  or is this a software bug?

  According to specification for laptop, your laptop was supplied with Win8.1 pre-installed so that all the necessary drivers are installed and all hardware should work fine.

  Try please check all the touchpad settings and check if changing the settings has positive effect.
  What you can try to do is to reinstall the original recovery image and test once more with the factory settings. If the result will be the same, I recommend you to contact your dealer as soon as possible and explain the situation. Ask if you can get the new machine.