Satellite Pro M30: Cannot read DVD on DVD - RW disc
I have can´t dvd´s read...
I can burn but when I start to read, it shows me an error like this "E:\ is not accessible. The request cannot be performed because of an i/o device error."
It s killing me, please help
Hello
The IO device error occurs if the drive has a problem with the disc or the configuration of your system (mainly a problem of disc).
Peut-t DVD player play all DVD or just DVD serious?
What burning software did you use?
As far as I know, you should always logged out of engraving.
Also if you need the DVD Shrink software please check this link:
http://forums.Afterdawn.com/thread_view.cfm/192015
http://forums.Afterdawn.com/thread_view.cfm/244972
http://Forum.Digital-Digest.com/archive/index.php/t-45081.html
Good bye
Tags: Toshiba
Similar Questions
-
Satellite Pro M30: Cannot write - DVD SD-R6112
I have a M30 Satellite with a Player Pro combined DVD - ROM SD-R6112 DVD. The drive is marked as "DVD-R/RW. It will play the DVD without problem, but it will not recognize any blank DVD - RW disc. I've used Nero6 and RecordNow Delux.
The drive is incorrectly marked? If anyone has had problems similar and, more important still, to find a solution?
Hi Geoff,
Your device works properly if you use DVD-R discs? I tried mine using a DVD - RW once and it would not accept the disk until I had formatted (using NERO).
Using DVD - R blanks I had no problem at all.HTH
-
Portable Satellite 1800-750 cannot read DVDs that require files avi (codec)
my laptop satellite S1800-750 cannot read DVDs that require avi (codec) files. l have updated dvd drivers and upgrades of my multimedia player of series 10, but nothing helped. I need emergency aid.
Hello
I suggest, that it can not ONLY play .avi files. Am I wrong?
In this case, you need additional codecs.
This has nothing to do with the DVD drivers or firmware.
Check the internet for the codec. I'm sure you will find a lot of info if you want to google a bit.Good luck
-
Satellite Pro M30 - cannot install audio driver
Hello
I have a Satellite Pro M30 which usaed work properly but I can install more drivers sound card is on.
I think it happened because we have reinstalled windows XP Pro with SP2, but may not be some.
He is installing drivers Sigmatel AVC97 and comes up with the following error.Parameter invalid operating system or this installer does not support this operating system
Any suggestions because it does appear that a driver for the family of SPM30.
Hello
Try to install the driver using another medium facility.
To DO this in the Device Manager.
Mark the sound card and use the option to update the driver.
Then, use the advanced option and indicate the location where the driver audio was stored on the HARD drive.Please note; You must decompress the audio driver package before installing
-
Satellite Pro A40: Cannot read music - looking for an audio controller
Hello
I have a satellite pro A40, my DVD rom drive no longer works and I get a message on the search for material for a multimedia audio controller!
Cannot play music or anything more.
Can I download these drivers safely?
Don't want cluttering up computer with random internet downloads.If anyone can help me I would be eternally grateful
Hi satproa40,
You can download all the drivers for your satellite safely of: [http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
the "multimedia audio controller" means that the audio driver,
If already installed it can help remove this item in Device Manager and let it reinstall System.same procedure with the dvd - rom, if this wont work try swapping the drive...
-
Re: Satellite Pro M30: cannot enter hibernation mode or standby
I have a Satellite Pro model M-30 # PSM35E-000NU AR recently the hard drive crashed and I installed a new 80 GB replacement.
Now I can not access the 'characteristics of hibernation or standby.
In addition, shortcut keys are inop.When I go to programs, utilities Toshiba the only option available is SD memory card format.
I can't access the link of "accessibility". and I can't access the configuration of H.W Toshiba.Can anyone help me with any of them?
Hello
For me, it looks like you don't have Toshiba drivers all installed and necessary.
Have you used the Toshiba recovery disc after the HARD drive has been replaced or have you installed the Windows XP using a clean CD Microsoft?Please note that the common Module are very important!
You must install this software first!
The Toshiba Power Saver help you to enable Hibernate mode and also to access standby mode!On the Toshiba European pilot page you will find all necessary drivers and you'll also find installation instructions.
Follow m this and I sure will get you everything works again! -
Satellite Pro M30 - cannot burn CD/DVDs
Hello!
Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).
Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.
Windows XP 5.1
IA32
WinAspi: -.
Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
Nero version: 6.6.0.1
Recorder:Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
Adapter driver:HA 1
Drive buffer: 2048kB
Bus type: default (0)-> ATAPI, detected: ATAPI
CD-ROM:Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
Adapter driver:HA 1 = Scsi-device-map =.
DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off= CDRom-Device-map =.
CARPET * a DVD-RAM UJ-820 s D: CDRom0
Generic DVD-ROM E: CDRom1
=======================AutoRun: 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) byte
ShowDrvBufStat: 0
BUFE: 0
Physical memory: 510 MB (523184 KB)
Free physical memory: 228MB (233560kB)
Memory in use: 55%
QUERIES PFiles: 0x0
Static write speed table: 0
Use consultation: 1
Global Bus type: default (0)
Control supported media: disabled (0)4.11.2004
CD-ROM (ISO)
14:02:51 #1 text 0 file Isodoc.cpp, line 6165
ISO document burn settings
------------------------------------------
Determine maximum speed: FALSE
Simulate: FALSE
Write: TRUE
Finalize the CD: FAKE
Multisession: TRUE
Multisession type: Start multisession
Burning mode: TAO
Mode : 1
ISO level: 1 (Max. of 11 = 8 + 3 char)
Character set: ISO 9660
Joliet: TRUE
Allow pathdepth more than 8 directories: TRUE
Allow more than 255 characters in path: TRUE
Write ISO9660; 1 file extensions: TRUE14:02:51 text 0 file Burncd.cpp, line 2832 #2
CARPET * A DVD - RAM UJ-820 S
Protection against the imbedding of buffer enabled14:02:51 #3 text 0 file Reader.cpp, line 127
Player running14:02:51 #4 text 0 file Writer.cpp, line 122
Writer MATT * A DVD-RAM UJ-820 s running14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
First address writeable = 0 (0x00000000)14:02:51 #6 text 0 file Burncd.cpp, line 3117
Turn on Track-at-once, using CD-R/RW media14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 51106 (11:23.31)14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
Write in overburning mode: No. (enabled: CD)14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
Recorder: MAST * a DVD-RAM UJ-820 s;
CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
ATIP data:
Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
> Protocol of DlgWaitCD activities:
=========================================14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
CIS (after recorder preparation)
0: TRM_DATA_MODE1)
2 indices, index0 (150) not provided
#0 + 51107 (51107) original disc POS = #51107 / 11:21.32
relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
--------------------------------------------------------------14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
DAO infos:
==========
MCN:
TOCType: 0x00; Closed disc, session not obsessed
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
Introduction DAO:
===========
__Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
-150 | Lead-in | 0 | 0x00 | 0x41
-150 | 1. 0 | 0x00 | 0x41
0 | 1. 1. 0x00 | 0x41
51107 | Lead-out | 1. 0x00 | 0x4114:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
Removed 2 blocks from end of track 1. Length: 51107-> 51105.14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
Caching of files started14:02:52 #15 text 0 file Burncd.cpp, line 4003
Cache writing successful.14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
Caching of files completed14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
Burn process started at 16 x (2 400 KB/s)14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #014:02:52 #19 text 0 file Mmc.cpp, line 20673
Set BUFE: Protection against embedding of stamp-> ON14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
Status: 0x04 (0x01, SCSI_ERR)
HA-status 0x00 (0x00, OK)
TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
Key: 0x03 (KEY_MEDIUM_ERROR)
Detect Code: 0 x 73
Meaning of Qual: 0x03
CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
0x00 0x00 0 x 15 11 0 x 0 x 73 0x0314:03:11 #21 CDR-1106 file Writer.cpp, line 311
Power calibration error14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
all writers idle, stopping conversion14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
conversion idle, stopping reader14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
Invalid write state
CARPET * A DVD - RAM UJ-820S\H1 T014:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
Could not perform PlageFin14:03:12 #26 text 0 file Mmc.cpp, line 15477
start closing a Session 14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
SCSI Exec, HA 1, YOU 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-status 0x00 (0x00, OK)
TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
Key: 0x03 (KEY_MEDIUM_ERROR)
Detect Code: 0 x 73
Meaning of Qual: 0x03
CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
0x00 0x00 0 x 15 11 0 x 0 x 73 0x0314:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
Power calibration error14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
Could not perform fixation14:03:12 #30 text 0 file WriterStatus.cpp, line 258
falling back to disc fixation14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms)-> OK14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
Burn process failed at 16 x (2 400 KB/s)Existing drivers:
File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)Registry keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)Here's how I just fixed my misfortunes:
In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.
Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.
(1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".
(2) to ensure a hard reboot (power off)
(3) Windows to automatically detect any material it appears after reboot begins
(4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
b change of "Ultra DMA mode" "PIO" mode only(5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "
(5) - hard reboot again
(6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.
It should then work.
-
Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8
I have a L875 Pro of the Satellite with Blu - ray burner.
I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.
I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.
I play Blu - ray movies and dvd movies, blu ray player was fine.
I found information on the appropriate corresponding to the burning speed dvd disc speed.
How do I know what speed the burner support?
How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)
It would be great if someone respond and make the drive burn discs.
As a first step, it will be interesting to see why you cannot create recovery discs.
Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.Is there an option to create the USB stick recovery?
Combustion under Win8? Have you tried to use some burning as NERO applications?
-
Satellite L755-169 cannot read DVD + R DL
Hay guys
I have a problem on my Toshiba Satellite L755 - 169 (PSK2YE), my laptop can t read the DVD + R DL, but I can hear the DVD Player try to read, but it can.
Why and how can I solve this problem?
Can you tell us more?
It test yourself with self created DVD + R DL discs?ODD can write data on blank DVD + R DL discs?
-
Satellite Pro A300 - cannot write DVD
Hi all
I have a Toshiba Satellite A300 with PIONEER DVD - RW DVRTDO8A; Version 1.54 and after 2 years usingIi FW start having problems with the DVD the DVD because no desire to write.
Maybe someone can help me?
Hey Buddy,
You still use another brand of DVD? Some brands could not be compatible with your player. I made good experiences with DVD-R (not DVD + R) of Verbatim and TDK. Both brands are working well and never had any problems.
Did you check that?What burning software do you use?
I use CD Burner XP because it s nice and little freeware tool. -
Satellite P770-118 - cannot read DVD after upgrade of Windows 8
Hi, after installing windows 8 and put the Toshiba bios update, Ive found that the Blu-Ray/DVD will not work.
Trying to find support on the internet is a nightmare can anyone help?
Thank you
Hello
Check it please this Toshiba document - http://aps2.toshiba-tro.de/kb0/FAQ2B03F10002R01.htm
Maybe this will help. -
Toshiba Satellite Pro M30 cannot use USB 2.0
I can't use USB 2.0 on my laptop (OS = Windows 2000).
Where can I download this driver-USD for this Board (Toshiba laptop motherboard).Greetings
Hello
Have you seen yellow errors such as exclamation points in Device Manager?
If not, in this case it of not necessary to install all the drivers.
Moreover, the operating system automatically recognizes the USB ports.But what USB device doesn't work? As far as I know if this external device needs more energy than the 500mA so it is possible that the operating system can not recognize this device.
In this case you need an external power supply for this part or you try to use the USB hub.Good bye
-
Satellite Pro M30 - compatible DVD players
Hello
I have a Satellite Pro M30 and the optical block has problems, recognizing most of my DVDs.
I want to change the drive, does anyone know which are the models compatible with this machine?
The real player is Toshiba DVD - ROM SD-R6112.Thank you
DanielHello
As far as I know this unit has DVD +-R/RW (DualDrive) and in my opinion the best solution is to swap it with the same. On this way, you will be sure that everything works correctly.
Unfortunately, there is no public document on the hardware upgrade and just Toshiba service partners can tell you more about it.
Good bye
-
Satellite Pro M30: Needs to win 7 SD card reader driver
Hello
I've updated my old Satellite Pro M30 of Windows XP to Windows 7.
Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones but do not work.I downloaded those from Toshiba, but when everything is installed and I put the SD card, I and alert on Device Manager that says "conflict resources" error code 12.
Toshiba SD Card Controller Type A
Toshiba SD memory card readerWhat is the right driver? PLEASEEE
> Everything is OK, but I have problems withs pilots 'SD card driver ". I can't find something that works... I tried with WinXP old ones, but do not work
Win XP drivers do not work with Win 7, but you should try some drivers for Vista.
Try some drivers released for other series...Also try this:
You can go to Device Manager-> properties-> Details tab SC card reader
You can find something like that.
PCI\VEN_1217 & DEV_7120FRI means provider
DEV: deviceThen, you can find the identification numbers using this database of the PC:
http://www.PCIDatabase.com/This help to find the pilot!
-
My DVD has stopped working "cannot read DVDs Please decrease the current resolution.
Original title: DVD
My DVD has stopped working - error that says: cannot read DVDs Please decrease the current resolution and ensure that the connection of display type is taken care... Help!
Hello
What program you're using to play the DVD? Mention the name of the program?Try to play the DVD with Windows Media Player , and let me know if you get an error message.Play a CD or DVD in Windows Media PlayerResponse with more information to help you.
Maybe you are looking for
-
I'm trying to uninstall microsoft SQL server 2008 express R2 in windows VISTA from Control Panel and I get the error message "another program is installed. Please wait until the installation is completed and try to reinstall this software. " What sho
-
I have Windows Home Premium do I need windows vista or windows xp
I'm so confused as to what I need and that you don't need. There is therefore a lot of downloads, I don't know which ones that I need or if I need any of them. I have premium have window.
-
I recently bought a Dell P2414H monitor for my office work. Since I'm on a Macbook air, I also bought a docking station to connect with all of my devices. While all seem to function normally the screen that I have connected the hollow as a display po
-
Hi, I've updated to windows 8, I got my sd card reader works properly until very recently, when I refresh my pc... How to re install sd card reader? kindly help...
-
Knowledge Base folder structure
Is possible to change the tree view of the folder in the Knowledge Base?