Satellite Pro M30: Control buttons Audio\Video how to operate?

I had installed windows, downloaded from the site and install all the drivers of toshiba them (because I lost my drivers cd) but my command buttons does not work! If it performs by installing these drivers not in the Oder river as it is written in the user manual?

writing pleas back thanks :)

Hello

Yes of course. It is important to install all the drivers in good order.
But for the first: have you checked Toshiba controls settings?

Good bye

Tags: Toshiba

Similar Questions

  • Satellite Pro M30 - cannot install audio driver

    Hello

    I have a Satellite Pro M30 which usaed work properly but I can install more drivers sound card is on.

    I think it happened because we have reinstalled windows XP Pro with SP2, but may not be some.
    He is installing drivers Sigmatel AVC97 and comes up with the following error.

    Parameter invalid operating system or this installer does not support this operating system

    Any suggestions because it does appear that a driver for the family of SPM30.

    Hello

    Try to install the driver using another medium facility.
    To DO this in the Device Manager.
    Mark the sound card and use the option to update the driver.
    Then, use the advanced option and indicate the location where the driver audio was stored on the HARD drive.

    Please note; You must decompress the audio driver package before installing

  • Satellite Pro M30: buttons on the front don't do media control

    Buttons on the front does nothing when the machine (satellite Pro M30) is disabled or order the multimedia. Is there something I need to do to configure, or is it a hardware failure?

    Hugo

    Hello
    to perform the General music in "offline" mode, I pushed and hold down the Mode button until the blue LED on the CD symbol lit up on the front.
    After that I inserted a music CD, and portable he played very well in "offline" mode

    But this time I had to study the manual actually.

  • Satellite Pro M30: three "soft-buttons" don't work

    Satellite pro m30 there are three buttons that I can attribute using the toshiba software. Or Toshiba installed by default programs or my programs are put into service after a change more: should I reinstall something?

    Hans

    The Toshiba control utility is responsible for these buttons.
    But first of all I recommend to check the settings in the properties of controls on Toshiba. This can you find in the control panel.
    There you can configure the buttons.

    If it doesn't help, then I recommend to reinstall these applications.

  • Can Satellite Pro M30, you help me how I can connect the wire of the COM series?

    Dear Sirs,

    Can you help me how I can solve my problem:

    I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial Port COM in this model.

    Can you help me how I can connect the wire of series Com (SR232 DATA)?

    Where I connect on the updated satellite of reserve.

    For your information I have is also trailer male sides.

    Concerning

    Ali H. Ba - Aqeel

    [email protected]

    Hello
    you´ve got the alternative to get a PCMCIA Serial Port adapter.
    The Installation was easy to my laptop and runs without problems under Windows XP and 2000.

    Have a try.

  • How to remove bios password BIOS on Satellite Pro M30

    How to remove the password of BIOS on Toshiba Satellite Pro M30

    Post edited by: Admin

    I'm afraid to tell you, but to do this, you will need to contact local ASP.
    Because it's not easy or possible how you would do this on deskopt PCs.

    That's why you have to take your ASP. Guys it can remove the password.

  • How can I reset password BIOS on Satellite Pro M30?

    Hello!

    I have a portable Satellite Pro M30 and my son has changed my bios password and now I can't even start it! How can I reset the bios? Where is the bios battery out of MB, then reset as in desktop? Is there a jumper for the deal if all else fails? What should I try?

    Thank you all in advance.

    John.

    Hello John

    Remove the CMOS battery didn't help much. If the removal of the BIOS can be so easy, remove the password on the stolen units may be too simple. Please don? t wait that these information will be posted here.

    You can contact the after-sales Service of Toshiba partner. They will remove password for you.

    Good luck!

  • Satellite Pro M30: Can I update or change the video card?

    Can I update or change my PM735 Satellite Pro M30:Centrino video card / 1.7? Thanks /.

    Hello

    Short and simply answer no it s is not possible because the graphics card of the notebook computer is a small, small chip that attaches to the motherboard.
    The laptop with the desktop, you can compare t. It s a different technology.

    Good bye

  • Satellite Pro M30 - how to remove dust from fan

    I have a model satellite Pro M30 about 5 years.
    It seems to run hot and the fan seems to work a lot in the background.

    I was told to clean the dust around the fan, it's a big job.
    According to me, that there are a lot of screws on the bottom.

    Can help a whole based on do it myself

    Hello

    You do not need to disassemble the laptop.

    You can remove the dust and debris using a jet of compressed air.
    These aerosols can be purchased from the local computer or online dealers.

    I do from time to time to make sure that my laptop would not overheat and guess what; It is useful!

    Check it out.

    Welcome them

  • Satellite Pro M30 - where to get the new motherboard

    I have a sat SPM30 Pro PSM35E-0023J-FR model with a video fault.
    Anyone know where I could get a new motherboard?

    If anyone has a similar model with other damage that they might want to sell on. All I really need is the motherboard.

    Hello

    New parts can be ordered from the local ASP.
    But be aware that a new motherboard is not good cheap. You will need for a replacement of the mobo 300Euros.
    I think that it s not worth buying a new motherboard because you could add a few Euros and might get a new laptop.

    However, you can view some websites like Ebay for example a satellite M30/Satellite Pro M30 of second hand. Perhaps you could get a second hand mobo

    Good luck

  • Main summits UK for Satellite Pro M30

    I bought a Satellite Pro M30 in France and it has a French keyboard. I put in place to work as a UK version but can someone tell me how to get UK keys on it, so I can edit them to the French ones. Otherwise, anyone have the part number for a new keyboard for this model?

    P/N for the keyboard with the main UK tops:
    P000367420

  • Satellite Pro M30: upgrade memory (RAM live) - maximum capacity

    Hello

    My Toshiba Satellite Pro M30 is 4 years old with 512 RAM (2 x 256 DDR PC2700 SDRAM 166 MHz). I want to update my RAM the better. How much does it cost? (BIOS version improved of 1.50 to 1.70, Windows XP Pro SP 3).
    I would be happy not only to get the answer to my question, but also to know where I could find the answer myself.

    Thanks and greetings
    waltgallus

    If you want to find it only then use Google and you'll find this info somewhere. Using Google, you can find almost everything.

    So now the question: do you want to search for only one or you want your answer? ;)

  • Satellite Pro M30 - NVIDIA graphics controller problem

    Hello everyone

    I have a Toshiba Satellite Pro M30 with a Nvidia GeForce FX graphics controller. ([Image of the motherboard | http://i258.photobucket.com/albums/hh242/hardousss/PC3.jpg])

    My problem is when I turn on the PC and wait a few seconds red and white vertical stripes begins to appear on the LCD and it cannot go after the BIOS password screen. I can type the BIOS password but when I hit OK or button that ENTER the laptop freezes. ([See image 2 | http://i258.photobucket.com/albums/hh242/hardousss/PC2.jpg])

    In very rare occasions where the laptop was turned off for a long time, I listen to him on and he could overcome the BIOS password screen but freezes after a while: ([see Image 3 | http://i258.photobucket.com/albums/hh242/hardousss/PC1.jpg])

    I plugged it to an external monitor and nothing has changed.
    I removed the inverter (responsible for the lightning of the LCD screen) and the problem is still there.

    Always to blame the graphics chip from NVIDIA.
    I read here that it is not possible to replace them because they are soldered to the motherboard. But I want to, where can I get a laptop NVIDIA graphics chip. They sell somewhere?
    I have a friend who works in an electronics manufacturing company (SAGEM) and told me that they have the tools needed to replace any piece on any Board of Directors.

    Thanks in advance for any help.

    Hello, my friend

    I agree with you. It must be a faulty graphics card. I put t believe you can buy a graphics chip separately but you can buy mainboard used laptop on eBay. In my view, Exchange Board is no problem for you.

  • Screen jumping and overheating issues on my Satellite Pro M30

    Hey everybody!

    I have a Satellite Pro M30, the screen seems to wobble a bit, probably due to a loose hinge. Can you please help me with this problem?
    In addition, my laptop seems to overheat, how do I clean the dust to stop overheating?

    Thank you

    Hi mate!
    For the screen issue. As it is a hardware thing, I suggest that contact you a local ASP. Of course, you can try by yourself to this problem, but I can say from my own, fitting the screen isn't the easy thing to do on your own, if you have no experience in that.

    To clean your laptop from dust, you can use compressed air jet. Also make sure the cooling modules are not blocked by objects on your table, because if you've blocked, warm air ponds and cannot be updated.

  • Satellite Pro M30 - real time clock shows wrong time

    Hello!

    most of the time I am using my Toshiba satellite pro m30 without the battery with the energy of the power system. the battery is stored somewhere outside of the computer for a month the real time clock shows a bad time if the computer is started after a period of time.

    I think my cmos battery is going to die soon.

    someone has an idea, how this cmos battery can be changed by myself?

    Thank you
    Reinhard

    Hello Reinhard

    I agree with you. It is time to replace the CMOS battery. It is not easy and the machine must be dismantled. If you are not familiar with the procedure for disassembly, it can be dangerous. A small mistake can result with damaging material.

    If you want to do it alone, you do so at your own risk. Be sure to use the right battery. Maybe you won't believe, but if you use a battery hurt it could cause battery explosion, or other damage.

    I'm not 100% sure, but the RTC battery must be placed on the left side near the touch pad. If you want to only please be very gently. The laptop parts are very sensitive.

Maybe you are looking for