Satellite Pro M40 - no WLan connection - driver missing?

Similar Questions

• Satellite Pro L300-156 - WLAN connection drops every 12 hours

  Hello!

  I have a short model "Toshiba Satellite Pro L300-156" (PSLB1E).

  The system state is:

  I used the recovery CD (to install Windows XP and other software on this CD).
  I've upgraded to the latest version of the BIOS (1.50, 10/07/2008) for my laptop and I downloaded all updates for Windows XP.
  I installed the latest WLAN driver for my WIFI (Realtek RTL8187B) card.

  The problem is still there:
  Every 12 hours (exactly on the minute!) drops connections.
  Not only the Internet, but the local connection.
  It is even a kind of matrices.

  Both a connection to a local computer and "mIRC" (ssh/telnet-program) to "PuTTY" (program-chat-IRC) says "network error caused abortion of software".

  These ping connections not, they die instantly in a tenth of a second.

  Hello

  I guess it can be caused by a 3rd third party tool that was installed on your laptop.

  I mean it of really strange that disconnected EXCATLY after 12 hours of use.

  "I have goggled a bit for the message: network error: Software caused connection abort."
  And found that this error is displayed if the Windows network code decides that your network connection is dead. This will happen when you remove the cable network Ethernet-connected computer, or if Windows has any other reason to believe the entire network has become unreachable.

  I think you should check the settings of your WLan router. My router refresh / disconnects after 23,59 hours to ensure that the IP address has changed.

• Satellite Pro L10 and WLAN connection

  One of my clients claims that the wireless connection is not displayed in fact at all and he now believes that there is no wireless connection.

  The L10 was problems with does not appear before wireless connection?

  And if so is it possible to fix it.

  Hi Graham

  It will be interesting to know what model of Satellite has your customer (L10 - xxx). It is possible that the device has no wireless network card onboard. Please check the underside of the laptop. Usually, there must be a small label WLAN.

  If the device has a wireless network card which should also be listed in the device under network adapters Manager.

  Good bye

• Satellite Pro C660 - 1NR WLAN XP driver problem

  Hello

  We have a new 1NR C660 - have installed XP Professional SP3 - downloaded the drivers and installed. Everything works except the WLAN.

  List of device manager network controller - which details suggest a WLAN Atheros (DEV_0030) controller.

  We downloaded and installed the driver from the Toshiba WLAN download site, but it is still not recognized?

  I reinstalled XP 3 times and tried different versions of the driver but same result.

  Help!

  You have installed Atheros driver version 7.7.0.406.2?

• No wireless connection - can not operate the Satellite Pro M40

  Hi, first Post so hope I understand that I have Satellite Pro M40 A desktop connected to the router via Ethernet cable computer laptop used in another room with a Wi - Fi connection, I guess that means I had a wireless network? Re-installed Win XP and Service Pack 2 as I couldn't find Toshiba rescue disk now I have no sounhd or wireless on laptop something is obviously missing can not remember what I'm supposed to excuse the ignorance, but any help would be appreciated thank you I use the ethernet cable temporarily to access internet on Sat Pro thanks Derek

  Hello Derek

  If some components of hardware in Device Manager not preloaded properly visit the Toshiba download under http://eu.computers.toshiba-europe.com page > support & downloads.

  You will find all the necessary drivers (WLAN and his driver). When the wireless network adapter is correctly installed, you will be able to configure the WLAN connection.

• Satellite Pro M40: HARD drive replacement

  Hello

  I recently bought a new hard drive for my satellite pro m40 like my old man, we broke up I put the hard drive in the machine properly and it's the same speed, size etc, but the laptop does not recognize it at all.

  I tried to swap back to the old hard drive and he acknowledges, the news is a number of slightly different model a new the original is mk6022gax and original is mk6026gax. the two 60 GB, I am told. Please help me if you can.

  Thank you.

  Hi Ollie,

  The only reason I can think is that the new hard drive is may not be configured correctly for your laptop. I know that some Toshiba drives are supplied as C - salt rather than the more usual master configuration, but these are normally reported as such on the nameplate.

  It is possible to change the setting of the drive (see the following URL for details) http://support.dell.com/support/edocs/storage/p69067/jumpers.htm

  It is also possible that the new disk is defective (unlikely but it should be considered).

  Kind regards

• Satellite Pro M40, failure of the hard drive - the new disk restore disk?

  Hello

  My Satellite Pro M40 hard drive died and I want to install a new drive. Unfortunately, my old drive is 60Gig and the Web of Toshiba parts site has only 40 GB or 80 gig drives.

  I have problems with the recovery disk if the hard drive is not exactly the same thing?

  Your advice would be appreciated.

  C

  No, he should t be any problem with the Toshiba Recovery CD.

  On the recovery CD, you'll find a Windows OS, Toshiba drivers and utilities and software further.
  These entire applications are packed into image files.

  You should only be sure that the HARD drive is compatible with your laptop and it will be recognized in the BIOS.
  Then simply to boot from the recovery and installation CD must start.

• Satellite Pro M40: Files on DVD/CD not visible

  If data are burned to DVD or CD (+ R or + RW completed another manufacturer) then inserted in my Satellite Pro M40 PC he can see folder names but he cannot see all the files in the folder. When you click on the files, he says they are empty!

  When the same disks are inserted on other devices (on DVD players connected to a TV), records show the files and files open without problem.

  Sometimes the same disc when inserted in the pc, can be detected as drive is invalid

  Audio and video disks are no problem and open immediately.

  I am at a loss because even if I backed up all my data I can't re - insert the data if I lose it.

  Hello

  There are different reasons why you CD/DVD drive doesn t manage burned CDs.
  First all CD or DVD is compatible.
  I had a lot of problems with my mediums sometimes burned the disc was able to read, sometimes, it was not possible.

  I changed the burn at a lower speed, and which has slightly improved the situation. I also changed burning software.
  Now I use the Nero burning Rom software. It s really good program.

  But the main reason for these problems is the anomaly of lens laser discs. After a long period of work of the lens cannot calibrate properly and therefore can't handle the media inserted in this case only a replacement drive helps.

• Need advice on the Satellite Pro M40

  I wonder if someone could advise me. We just bought 8 smart tips for our school with these I ordered 8 portable computers SatProM40. When I ordered them I checked the spec as follows

  Toshiba SatProM40 - Celeron M360 1.4 GHz - RAM 256 MB - HD 40 GB-CD RW/DVD-ROM combo - Mdm - Lan EN - FAST EN - Win XP Pro - 15.4 "TFT.

  I checked before I ordered that the RAM was 256 because I had heard that it is the minimum recommended to switch to XP.

  Laptops take almost 5 minutes to turn on and everything takes an age to work it's really frustrating and they are totally useless for our school because the entire lesson is included with get the computers to run anything.

  I checked the system information and found laptops were running of 192 MB RAM and rang the provider. I was told that they used 64 MB for the graphics card and that's why they had provided a RAM of 256 MB computer.

  My question to someone who can help:-c' is a normal practice. If I had known this I would have ordered a laptop computer with more RAM to compensate.

  He would welcome any advice that would help us get our children working on their new computers. Thank you.

  Hi Lisa

  In my view, Satellite Pro M40 is nice unit for school work, but I agree with you really is 256 MB minimum RAM and I recommend you buy more 256 MB or 512 MB, depending on your budget.

  The compatible RAM modules are:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)

  Problem is that this device uses shared memory and that means that RAM will be used also for graphic designers. If there is someone who has a good knowledge of PC that they check all running processes. Many of them are unnecessary and can be disabled. I also noticed that preinstalled Antivir asks (Norton) slow OS quickly. If all units are not connected to the internet I recommend you to remove it.
  By the way: there are many applications of good antivir which works well and don't slow down the operating system currently running.

  Good luck!

• Beep on Satellite Pro M40

  Hello

  I have a satellite pro M40 and the sound card gives Tom Jones a much deeper voice! I tried to remove and substitute driver and I tried tweaking the options but same Kylie sounds more profound.

  I would like suggestions.
  Thank you
  Pat

  I would first check the software that can play audio files.
  For most audio software supports different equalizer settings and the audio question could relate to this wrong settings.
  Additional check SoundMax application in the Control Panel, don't choose the option no energy in the power management tab

• Cannot set external LCD 1080 x 1050 resolution - Satellite Pro M40

  Hello

  I just bought a Samsung LCD 226BW screen and my Satellite Pro M40 (PSM46E) makes me crazy. First of all, I could put the display driver in 1080 x 1050, but suddenly dissappeared option. I reinstalled the display driver, but no luck. He even got to the point of despair that I reinstalled the computer laptop everything, but it still does not work.

  I tried to download the display driver for the ATI Radeon XPress 200 M series the Web of ATI site, but it did not support my graphics card.

  Does anyone have a suggestion for what do I do? Thanks in advance!

  Best regards
  André

  Hello

  Did you receive a CD driver or software with your external monitor?
  I read in this forum that a lot of users received this CD and was able to activate this resolution of the screen.

  I think that the monitor manufacturers provide some .ini files which contain the information on the external resolution. This file must be replaced!

  But have you tested the graphics driver on the www.omegadrivers.net site?
  Check if these pilots will help you activate this screen resolution!

  Good luck

• Satellite Pro M40: Can't watch DVD-> DVD region code locked

  Hello

  I know this has been asked before, but there must be a solution...

  I have a Toshiba Satellite Pro M40 with a CARPET * a DVD UJ - 841S drive. I used my 5 times to change regions, and now I'm stuck on NTSC. I read on this forum (and others) that it is simply not possible to unlock the region once the 5 times have exhausted.

  Is it possible to copy the DVD (film) on my hard drive and watch it then?
  There must be a way!

  Any information would be great, thanks.
  See you soon,.
  Matt Savage

  Hello

  As mentioned it of not possible to unlock the DVD player on a legal way.
  Of course, I found many sites that suggest that it of possible to unlock the firmware flash drive.
  But believe me; It is not desirable and very risky!
  You may damage the disc and then you can not read or burn CD or DVD media!

  I put t know if it is possible to copy the DVD to the HDD in a simple way. I never did.
  But it of possible to reduce the DVD to the smaller size, then copy it to the HARD drive.
  For this procedure, I used DVD shrink. You can check.

• Satellite Pro M40 recovery disk install XP on satellite or L300?

  I had a Satellite Pro M40 with XP Pro who died completely (hard drive). I have the recovery disk.

  I now have two laptops more - a satellite and a L300, both with Vista. I want to install XP on one of them (preferably the L300). Is it possible to do using my M40 recovery disk?
  A bit of googling suggests that the differences in the size of the hard disk - may be an obstacle. My M40 40 GB drive, these new drives are much larger.

  Anyone tried this or have any advice?

  It will not work. Before the start of the recovery procedure the laptop will be identified. If the recovery media doesn t code is code on the laptop, the installation will be interrupted.

  M40 MS on L300 recovery no way.

• Satellite Pro M40 RAM fit laptop model L650?

  Hello

  I recently upgraded from my Satellite Pro M40 to a L650 because the M40 is dead.
  I was wondering if I could use the ram that I put in, in the L650?

  I'm guessing it will not, but thought I'd ask just in case.

  Thank you

  Sorry, but I don t know why this combination. Max RAM on M40 is 2x1GB and I think you're in L650 2x2gb. Right?

  It makes no sense to me.
  I put t know what L650 you have exactly, but some models can be upgraded up to 8 GB, so it will be better for you to upgrade with a 4 GB of RAM L650. Part number is PA3677U-1M4G.

  By the way: there are different bus clock etc new notebook you should only use modules compatible and faster.

• Satellite Pro M40: screen remains dark until Windows has fully loaded

  Hello to all here.
  I have a problem with my laptop. My laptop is a Satellite Pro M40.

  When I turn on my laptop, I found the backlight won't come... the screen will stay dark until it has fully loaded into Windows. I've checked all my food, and there all fine options. Even if I can get the Bios screen its impossible to read the txt because without backlight. I tried to hold the Fn & F7... joy of Noy.

  Someone at - it ideas?

  Richard

  Hello Richard

  I didn't see anything like that before and I'm a bit confused why you can't see the BIOS settings, but running the OS. Use of the FN + F7 key combination won't help because this option only works on Windows and not on the level of the BACK.

  If possible try to plug the external monitor and test again. In any case I put t think you can fix it yourself. Try please contact Toshiba authorized partner in your country. Explain the situation and see what they say.

  If you discover that something please let us know. It will be really interesting to know why this happen.