Satellite Pro M40: Standby Mode active when you press the sign @.

Similar Questions

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Yoga 2 Pro - keyboard is not activated when you open the lid of the screen after sleep

  My Yoga 2 Pro has very often problems to activate the keyboard when I open the screen.

  That's what I do:

  -work with Yoga 2 Pro

  -Close all applications and after that, I close the screen

  -After some time (maybe a few minutes or several hours) I open the screen

  -It will take a few seconds until the screen is turned on (which is expected)

  -at least 50%, the rest keyboard disabled. The backlight cannot be activated and the laptop does not notice any key. I'm unable to log :-(

  -J' I need to close the screen, it takes a few seconds - and when I open the screen for the second time, the keyboard is enabled - not always, but usually. But sometimes the keypad remains disabled, although I try the procedure several times. If that happens, I need to restart the machine.

  All the drivers are up to date.

  @Lenovo: Please indicate how to solve this problem! It's very annoying open-close-open-close-open-... the display up to what the keyboard is finally activated!

  Kind regards

  Oliver

  http://download.Lenovo.com/Consumer/mobiles/transit136w81.exe
  Transition of Lenovo 2.0 for Windows (32-bit, 64-bit) 8.1 - Lenovo Yoga 2 Pro

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• mouse pad works correctly. active when you press is not on the left button

  active mousepad without pushing the button left mouse and sometimes active when you move the arrow with your finger on the mouse pad.  Pavilion of Win 7

  Have you tried uninstalling and reinstalling the driver for the touchpad for your laptop? You can download it from the download page of software and the driver for your model laptop.

  Alternatively, you can follow the instructions on the following document in order to identify the problem with the touchpad.
  http://support.HP.com/us-en/document/c01876141

• A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  A font I need is not available in italics. Corel Paint Shop Pro produces the police in italics when you press the Italic button in the software, but I don't see any way to do this in Illustrator. Help, please.

  Select the text and use the Warp tool to give a fake italic.

• Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine.

  Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine. It must be a sequence of keys... but I have no idea what it could be. Thank you and God bless you

  Hello
  When exactly the problem occur?
   
  Follow the steps below and check if that helps.
   
  Step 1:
   
  Test the issue in safe mode and check if the keyboard is blocked.
   
  Step 2:
   
  If your computer very well in Safe Mode functions, you can put your system to boot and check if any third party or any service application is causing the problem and therefore the computer to freeze.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.
   
  Once the system is in a clean boot state, check if the computer continues to block or not.
   
  See the link below for more details:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows help keeps popping up when you press the happy.

  Hi, I am currently using an HP XT's spectrum that runs on Windows 8. Two days previously, when I press SHIFT C, the capital C is not at all.  Therefore, I press Caps Lock shift but this triggers a Windows Help is displayed.  This can be very irritating, especially when I'm typing a document. Anyone would be able to tell me how to activate the 'Shift C' keys, as well as to turn off the help pop-up windows when you press the CAPS LOCK key.?  Thank you very much for your help!

  Hello Lai,

  Thanks for posting your query in Microsoft Community Forum.

  If it works well before? If YES, you did important equipment or modifications to the software on the computer before this problem?

  The issue could rest with the material if it is a keyboard mapping problem. Then, I recommend you to connect an external keyboard with the ultrabook and check. If the external keyboard works fine, then you may need to contact the manufacturer of your system (hp) for the same problem.

  If you get the same problem with the external keyboard, the issue may rest with the keyboard or corrupt drivers.

  In this case, I suggest you to update the drivers for the chipset of your ultrabook. You can view the following link to do so:

  Spectrum of HP XT Pro Ultrabook

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• When you press the new tab, how can I get the homepage instead of the history of tiles?

  When you press the new tab, how can I get the homepage instead of the history of tiles?

  You can try this.

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  Instead of the parameter mentioned pref in about: blank, you can enter any site of your choice.

  Ex: encrypted.google.com

• new tab does not appear when you press the button "open"

  A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• Crash when you press the [...]

  I got various random crashes when you press the button [...] in the various 9.0.1, CVI function panels but I have not found a model so far.

  1. open Control Panel function for SetCtrlAttribute
  2. for "Attribute of control", press the button [...] and select the item of «Format"under «Format and precision...» "found under"control settings.
  3. press the button [...] to 'value of the attribute.  For me, he won every time CVI.

  Thanks in advance for any help!  If all goes well, there is a quick fix that I find this feature very useful.

  Hello

  It is a known issue with CVI 9.0.1.  This link should fix the problem for you.  Let me know if it does not work.

  NickB

  National Instruments

• Selected pass contains a string indicator combo box when you press the Enter key

  Hello

  How to pass selected contains a string indicator combo box when you press the enter keyboard key?

  Right now I use a button to send the command selected in the combox to string indicator.

  The photos shows a combo box with the button that I use to send to the indicator as example.

  After the user selects the text to pass, "send the cmd" button must be pressed to pass the string.

  I need to pass the selected string when the user press enter on the keyboard rather than press the button 'send cmd '.

  Kindly to you needing help.

  Hello

  You can use a structure of the event to capture keystrokes and filter, transmit only the drop-down list box "value of the indicator of channel when you press the return or enter key."

  Let me know it the joint allows an example (in LV 8.6).

• PowerEdge T410 won't do anything when you press the power button / stop.

  My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

  -Who-

  I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

  Problem solved

• How can I make windows play a sound when you press the SHIFT key

  My keyboard doesn't have a light to indicate when it is capitalized. He used to play a sound, but it is more the fact after that I said not to do. However, when entering passwords that are case sensitive, it gives the wrong password. Can someone tell me how to re - turn on the sound.
  Its a Logitech MK320 wireless

  Look in Control Panel > accessibility, and then click "make the keyboard easier to use." Check the box "turn ToggleKeys. This will produce a note when you press the lock keys. Or just check the other box beneath it. In this way, you can turn the tone on or off without having to return to these settings.

  SC Tom