Satellite Pro M50 - upgrade RAM does not fit

Similar Questions

• Satellite Pro 6000 - new RAM does not work

  Hi all

  New to this forum sorry if this was asked before, I did a search but could not find anything so here goes.

  I just bought a new RAM for my Satellite Pro 6000. When I install it nothing happens the laptop won't boot. If I put the old stick in no problem. The ram I bought is unb 512 MB PC133 CL3 and old RAM 256 MB PC133s. I think little small to read with these old eyes.

  I was told I might need an update of the BIOS but cannot find one for my laptop under 1.4 for the moment.
  Any help would be thank Lindsey

  I think that the new RAM is not compatible with the motherboard or laptop.

  The manufacturing of the new RAM you said does not for me so I would buy an another RAM, such as Kingston. Kingston makes high quality RAM and many users here buy Kingston RAM to upgrade its RAM.

  By the way: do you use the RAM or only the new? Normally, if you use two memory modules live, you must use it with the same specifications.

  The update of the BIOS, you can find the Toshiba site, but this doesn t affect the compatibility of Aries.

• Satellite P10 - 554 dvd - ram does not work

  I got a Satellite P10 554, and as I said above the RAM does not work.
  It should be a software problem, because if I reinstall the drivers it works a few minutes (it did until now yesterday it stopped completely)
  It is impossible to install the new drivers or update a firmware somehow
  (pilot: after rebooting, the old drivers are loaded again (but I uninstalled them))
  (firmware update: I still got the message: invalid drive to update f/w)

  I hope that someone of you can help me ;)

  Hello

  What did you mean with the work of t car doesn?
  You are not able to burn or read the media?

  The error message says it all. I think you re not able to update the firmware because the firmware is not supported on this drive.

  Try to remove the drive from Device Manager, and then shut down the laptop.
  Usually after restarting again the operating system should recognize the drive again.
  If this does not help, you can try to remove the drive from the laptop. Turn on the unit, then go into windows. The reader should disappear. Then stop and reset the drive in the notebook. After this procedure the laptop must load the firmware again.

  It will be useful.

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Satellite Pro A10 - upgrade RAM

  Hello

  I have an A10 with 512 MB DDR PC2100 CL2.5 Satellite Pro (266) and want to upgrade to 1024Mo with two sticks of 512 MB. The scanner memory Crucial sites says I can do it and PC2700 (333) too.

  I bought the package and install, it worked for a day or so then wouldn't boot, no LOGO from BIOS Toshiba no tray DVD not free either. When I put the old RAM, things were ok. .

  So my question is really:

  The A10 is able to use the RAM PC2700 as Crucial says he is or they is bad.
  Textbooks do not give the answer.

  Thanks in advance for any information on this problem.

  I ve checked the specs of the laptop and it says that you can upgrade your laptop up to 1 GB of RAM and compatible RAM module for upgrade is PC2100 512 MB (PA3164U - 1 M 51). Check it please this part number. This module is 100% compatible and you can use it with an old man.

  Maybe it sounds silly now but Crucial is not the best option. Many people have claimed about similar problems using critical modules.

• Satellite Pro C50-A-153 does not not turn on more - overheat?

  LS,
  A week ago I bought a new laptop, a Toshiba Satellite Pro C50-A-153.

  Last night I was watching some micro-credit (looking for a new holiday) and I noticed that the laptop was overheating.
  I hit the market / stop butten and it turned of... later.
  And now the computer lights no more.

  _Situation: _
  laptop was placed on my table, completely cleared of any blokades for air intake.
  The table was heated. Now after hours of reflection, the computer does not work.
  With or without power line in it.

  What should do?
  Erik

  Hello

  Let's hope that Timox tips might work for you.
  In case of workaround won't help you, I would say that some hardware is dead, and so the laptop does not power and more.

  What part of material likely to be affected? Hmm, in the worst case, your motherboard is faulty.
  But I think first of all that some less expensive parts need to be checked for example RAM modules.

  RAM failure would prevent the laptop to boot and so I would check the modules first.
  I don t think there is something wrong with HARD drive because even if the HARD disk is defective, the device turns on but could not start the system.

  But it's a new laptop... so don't replace anything. The guarantee is valid and in the event of hardware problems, the guarantee must cover the laptop repair.

• A Satellite Pro 6100 graphics card does not work correctly

  Hello!

  I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
  I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

  Now my questions:
  1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
  2. How can I do this, is there some tutorials, especially for my laptop?
  3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

  I thank very you much in advance!
  Lukas

  Hi Lukas

  The led flashes as it provides a microcode error!
  This is especially if the malfunction of hardware has been detected.
  I presume that the replacement of the graphics card is the reason!

  As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
  Looks like that the BIOS cannot handle this new graphics chip.

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Satellite Pro L450D - web application does not yet

  Hello

  My toshiba Satellite L450D Pro does not work yet.
  Please I need a link to download a new one please.
  I have tried several sites but all proved abortive.

  Here you can download all drivers and software for your laptop model:
  http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

  You will also find the webcam software.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

  Hello

  My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

  Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

  If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

  Thanks for any help or ideas
  Steve

  After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
  But I can't give you a reason why it causes an error.

  I found this similar thread in the forum
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

• Satellite Pro 2100: Quick fix does not work with Win XP SP2

  pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
  Are there drivers for Windows XP service pack 2?

  Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

  When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

• Satellite Pro P300-1AY: Vista does not display computers XP network group

  On my show w Satellite Pro P300-1AY with Vista, my old XP computer is not always displayed in the list of working groups.
  On my old XP computer, I still see the new Vista computer

  Can you tell me why the Vista computer not always displays the XP computer in the network group?

  On the commputer of Vista, I traced a directory on the XP computer and it will connect even though the task force list does not show the XP computer under the list of networks

  Hello!

  Have you disabled the firewall on the XP computer?
  Maybe a 3rd party security software is blocking it.

  Check the registry and go to:
  HKEY_LOCAL_MACHINE es\lanmanserver\parameters
  In this case don't Scream no entry with the name of Hide.
  If you have such an entry, delete it.

  Good bye

• Re: Satellite Pro S500 - brightness adjustment does not work correctly

  On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.

  When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.

  Hi asdf.

  I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled

  In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.

• Satellite Pro L300-PSLB1E: XP does not control the wifi to the power connection

  * + Hello + *.

  I have a model Satellite Pro L300-PSLB1E and a XP Professional SP3 on it.
  Already everything works because I had a compilation of drivers copy of the past.

  The problem is that XP does not control the WiFi works without danger the and it disconects when I close the lid.

  So I tried with the power that said safety program to:

  Bq. [06/04/08 Power Saver Toshiba Windows XP 7.04.02I | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpwrsav-es-20080519173239.zip] + doesn't work-error 0 x 0 +.
  And I tried also with the thought of program Toshiba wifi on 32-bit compatibility:
  Bq. [Intel PROSet/Wireless Software | http://es.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fpro-ncs-20080416140552.zip] + doesn't work too-Said controller is not installed when you and full work +.

  So, how to control the peripheral power turn off on?

  Bq. * + thanks for your attention and patient. + *

  Hello

  Firstly the Toshiba Power Saver requires the installation of the common Module.
  The common Module for Win XP v1.00.05 can be downloaded from the European pilot page Toshiba.

  So before installing the energy saver, install common Module, restart the computer, and then try the energy saver.

  In addition the Intel PROSet/Wireless Software can be used only with the Intel Wlan card.
  Is the laptop supports the Intel wireless network adapter?

  AFAIK the L300 series can be equipped with a Realtek, Atheros and Intel Wlan card
  Check it!