Satellite Pro M70-137: can I use Memory Stick Pro Duo?

Similar Questions

• Satellite A100-775 - can't read memory stick pro duo of

  Can not read the Memory Stick * pro Duo * of my DSLR Sony to edit the photos

  Y at - it an update, or maybe a solution via USB-adapter?

  I put t have Memory Stick Pro Duo cards, but I looked in the user manual and the card reader supports SD/MS/MS Pro/MMC/cards xD and it looks like that the MS Duo Pro cards are not supported.

  I think you need to use an external card reader. I bought a Kingston external card reader and it works fine.

• COM/LPT ports on Satellite A10 lost and can't use the modem

  My Satellite A10 lost ports, and I can't use my modem.
  What can I do?

  Hello

  I think you should remove the modem from Device Manager. Restart the machine and the operating system should recognize the modem again. Then you can reinstall the modem driver.
  All this should be done automatically and you need t to add all ports.
  The properties must be enabled if you have administrator rights.

  Thanks and good luck

• Satellite P300-1GK - I can't use the S-video port

  Hello

  According to the specifications of the laptop, I have a S-Video output. The problem is that there is something just in front. So I can't use it. Check the picture.

  http://img220.imageshack.us/my.php?image=p1010027s.jpg

  How can I do?

  Hello

  Seems the specifications listed on the page are not entirely correct.
  Satellite P300-1GK supports TV-out but NOT s-video and Composite port!

  In addition, HDMI port output is available to connect the laptop to an LCD HDTV.
  But some other models support the s-video and that's why you can see a place for s-video port in the lid of the laptop

  I hope I could bring a precision!

  Good bye

• Satellite A660 - 11M - I can not use wireless - seems to be swiched off

  The free thread is disabled and he let me turn on the switch wireless, but when I pressed the key that in front of the keyboard, easycontrol bar and just have no reaction and wireless light does not work on.
  I wonder is there is another key to turn it on? or should I download the driver of the easycontrol bar?
  And where can I find it?

  Thanks for help

  Hello

  The WiFi network can be switched on and off using the FN + F8 key combination.
  Have you tried that?

  Also update the WLan driver. Can be useful too.
  If the FN buttons would not work, you must reinstall the VAP (value added package) and Flash memory card Support utility.

  Good luck

• For the installation of the satellite P850-30W system - can I use a SSD

  Hi all!

  Telephone tech support couldn't give me an answear good so I try my luck on this forum instead.
  I just bought a Toshiba Satellite P850 30W and what I understand there is a m-sata port available.

  My question is: is it possible to put for example a CRUCIAL RealSSD M4 SSD 128 GB mSATA in this machine, install W7 on it and use it as a OS disk? and use the 2.5-inch slow for storage disk.

  I don't want to buy a new sata m before I know it is doable, I would also like to know the best and easiest to do this, seen a lot of different approaches in different forums.

  IF I install w7 on the m-sata drive can I use the series key provided with the preinstalled windows or what I call MS?

  Thanks in advance for your help :)

  Hello

  The P850 Satellite supports the common SATA controller.
  You can use a common SSD 2.5 drive, that support the SATA interface.

• Satellite A100 - 811 PSAA8E - can I use the function keys to control winamp?

  A similar problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26351

  My question is: can I use this buttons included the following buttons, back, stop, and pause to control winamp?
  My model is 811 A100 PSAA8E

  Thanks for any help!

  Try to activate the "Global Keys" in the preferences of-> Winamp Plugins section.

  By default, the keys are on:

  Rewind/FastForward = CTRL + LEFT and ARROW CTRL + RIGHT
  Previous track / next track = CTRL + HIGH and CTRL ARROWS

• Satellite P300-1EU: I can't use my keyboard

  Hi all, I have a big big problem.

  I have a Toshiba P300 1EU, and yesterday, I can't use my keyboard.
  When I click on "Num Lock" I see on the screen the same if I press 'FN '.
  I already do a system restore but it is fail :/

  I don't know what I can do,

  Thank you to answer me :)

  Hi mate

  Just a question; the motherboard has been replaced?

  I read that numypad may not work once the motherboard has been replaced.
  This can happen due to missing or incorrect settings in the DMI.

  AFAIK the DMI one only updated by ASP, so in this case the ASP technician should be contacted.

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• Satellite L755-M1CU - I can't use WiFi and Bluetooth

  Hey guys

  I started to level for my windows and I can't use wireless and Bluetooth

  I need drivers for these means of cards

  L755-M1CU

  Saying: "upgrade"... you mean the Windows 10 upgrade?

• Satellite L50-A-1CU - can I use non-Toshiba drivers for Intel & Nvidia?

  I have some problems in Adobe Lightroom and Photoshop using the Toshiba drivers; can I use those of Intel and Nvidia, or there is something exclusive to Toshiba?

  Thank you very much
  Marco

  Hello

  In general, yes you can use them. Problem is that these drivers are not supported and tested by Toshiba for you to use their own risk.
  To be honest in the past years I've heard different stories about this. Some people are happy with the best graphics performance.

  Some people are complaining on very strong and permanent machine running to cold air. Even after that initial installation of image recovery the situation is the same. I ve heard say that the values in the GPU BIOS will be changed and it is not possible to recover their origin and default settings.

  There are also reports on the switch OFF as a result overheating.

  I put t know what to say on this subject. I use my machine with the original drivers. I don t want to risk anything. Of course, with your machine, you can do what you want, then that's your decision.

  If you install them please be so kind and send us comments. It can be very useful for other owners of laptops.

• Satellite C660 - have a problem using memory stick 4 GB Ocz Rally2 Turbo

  Hello

  Came a cross this rolling strip [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=217818 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=217818]

  Sorry my bad English,

  So I have 4 GB Ocz Rally2 Turbo memory stick, and it will not rise in the computer. My other 1 GB Fujitsu Siemens and 32GB Verbatim USB sticks work.

  It's brand new, portable 2 weeks of age. And there seems to be a problem in the hardware level.
  Windows 7 64-bit.

  Should I just send it to repair/money back guarantee?

  Hi JoneK,

  Have you tried this USB stick on another computer or laptop? The new USB is may be defective and so it doesn t work.

  At the moment I doubt s a problem of your laptop because other USB keys work correctly.
  At least, it might be a compatibility problem between the USB and the laptop but first test it on another computer.

• New Installation of Windows 10 using Memory Stick

  Installed Windows 10 of a download of Microsoft with the iso installed on a memory stick with training camp. After you have created a Bootcamp partition I couldn't install Windows on Bootcamp partition due to an error message 'GPT Partition Style'. Reformatting of the Windows installation screen did not help. The solution came as a surprise. I was start from the windows 'disc' when I should have used the IEF 'drive '. After starting the EFI, reformatting of the Bootcamp partition disk worked and the installation went well, with the exception of the Setup screen was too small to read easily. Fortunately, I was familiar with the installation of the failure of the previous installation screens.

  Windows 10 works fine now. The link below is what led me to a solution.

  http://code-zest.blogspot.com/2015/02/Windows-8-install-GPT-partition-style.html

  Your MAC supports two installation methods, inherited from the BIOS/MBR (used for XP, Vista, W7) and EFI/GPT (W8 +, W10). The first method requires a hybrid MBR to 'map' the GPT to a MBR-look-alike. EFI/GPT boots are 'native' and faster than the legacy method.

• Satellite 5200 701: I can't use the TV-out more.

  Hello
  This is my first post on this forum. I have a Satellite 5200 701 for 3 years now. I can't watch movies on my TV. I could use this function in the past.

  Last November, I formatted my laptop with CD from Toshiba. As I didn't have a TV, I tried not using the TV function. But now that I have a (different) TV, I tried to use it without success.
  When I press Fn + F5, nothing happens. When I go to the selection of the screen, I can select the 2nd display but in "Advanced", I can't find the same features I've had in the past (before formatting). I don't have the Nview utility in "Advanced"...
  Is this a driver problem? NVIDIA, Toshiba or Microsoft? Problem of material...?

  I don't know how to solve this problem.

  Kind regards
  jimbow

  It cool s that you have solved the problem.
  Thanks for the information. It could be very useful for users of the Toshiba a different forum.

  concerning

• Satellite U300-14 b: can I use the graphics driver for the Intel page?

  My Satellite U300-14 b (VIsta 32 bit Home Premium, 2 GB) has a 'Mobile GM945 Express Chipset Intel'. Download from Toshiba site, says I've got the latest driver, namely 7.14.10.1263 dated 04/25/07.

  The Intel site lists their latest driver such as in date 7.14.10.1364 dated 11/12/07.

  I want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep. I am told that the graphics drivers are often to blame and should therefore be updated.

  Can I safely updated with version 11/12/07, or I risk of problems? Not sure if Toshiba are just slow to release the updated driver, or if there is a better reason that they did not?

  Well, usually you can use the graphic driver directly from Intel page but I found several threads here in the forum that said that the chart non-Toshiba drivers can be installed and used only at your own risk

  > want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep
  Hmm perhaps this problem could be related to the graphics driver, but I recommend you to update to Vista and install all THE patches for Vista.

  Best regards