Satellite Pro M70 does not see HARD drive sometimes

Help me!

My computer does not see my hard drive but see Installer and another computer.
My hard drive is working and I put the new drive hard but computer does not see.
And when I install XP on the computer I can see HDD format during the installation.
And when prawns my computer I do not see the HARD disk again.

Help me please

Hello

I think that it s a HDD issue naturally it s really strange that the HARD drive is different sometimes and sometimes it s is not visible, but I doubt that it could be software related issue. That's why I think that it s a drive HARD and in my opinion, you should check if other HDD SATA runs correctly.

Good bye

Tags: Toshiba

Similar Questions

  • Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

    Hello

    My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
    I made a USB bootable with Win8 and starts very well.

    The problem is that it does not detect my SSD, so I can proceed with the installation.
    SSD appears in BIOS but not in Windows Installer.
    He said that there is a missing driver.

    I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

    I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

    What can I do?

    Thanks for the help.
    Best regards
    Bruno Moreira

    More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
    In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
    As you say, the compatibility mode is not working too, so I think there is another problem.

    However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

    But I m wondering if you would be able to install this Win 8 on common SATA HDD.
    Have you tried to format the SSD using a different computer, then install Win 8?
    Give it a try.

  • Satellite Pro A10 does not start (HARD drive seems to be missing)

    Hello, I hope someone can give me some advice on this problem: I have a 2 years Satellite Pro A10. Recently, it starts not at all and I noticed that if I look at directories on the C: drive using the command prompt, it said "file not found". Cannot start Windows at all, not even in Safe Mode.
    Using the recovery disks is I help spread messages as no such fixed disc and 'Extraction impossible '.
    is - that say I have:
    1 a hard drive damaged
    2. defective connections on the HARD drive? -If Yes, how I fix that?

    the system didn't crash before it happened, she doesn't have to load up when I started it.
    Would appreciate any help.

    Thank you
    SCL

    Hello

    Well, it could be a hardware malfunction of HARD drive. Yes, it is possible. But I don t think that there is a bad connection. You used this HARD over the last two years and you n t change the settings of connections on this HARD drive. Is this good?
    If it possible s so I suggest you of to completely format the HARD drive.
    Then try to start the recovery procedure.

    However if the HARD drive has a functioning default (ie. crushing of the head), so the only way is to replace this device.

  • Satellite 1415 does not see HARD drive

    I just finished my old 30g HD to a 160g via a cable usb/ide on my Satellite 1415 cloning/adaptation.

    I've used Norton Ghost who said using the copy MBR 'not' option, I have to format the new drive. It took me over six hours to do due to overheating closed the first period which forced me to do it again.

    Now with the new full disk, I installed in the machine and starts, received a message "NTLDR is missing" on the first try. After going in (WinXP) disk management I noticed that the new drive was now three scores, two the same size that the old hard drive and the last not allocated. I looked at the files in the first partition and found that I do not need so I deleted the files and the partition. The remaining active partition has all the Po files, that I need so I have it assigned a drive letter.

    Now to start with the new drive I get missing operating system message. I ve changed the boot order and linked to the boot the ghost CD but had no luck with either. Of course the machine does not see the disk, so my question is how I can get to see the new drive letter to start when it seems now that for a C:\ drive?

    The only option I see in the BIOS is boot order change. Thank you

    Hello

    To better understand:
    The ability of the entire HARD drive is recognized properly?

    To be honest, the whole story is a bit confusing for me. I use Norton Ghost with WXP too and I know that you can create your own recovery image and burn on CD or DVD. This medium, that you can use to install an operating system.

    You can also save files to recovery on the second partition and then copy to external HARD disk.

    With the new HARD drive using Microsoft facilities CD and install WXP. Create own partitions on the new HARD drive and all ghost copies files to the second partition (new HARD drive). You may not install all driver and tools but install Ghost on this OS fresh and naked. Start the ghost and Recover My Computer option. So, after 20 minutes, you'll WXP as on the old HARD drive.

    I did it with my old Tecra.

  • Satellite Pro M70 does not read the DVD of some manufacturers

    Recently, my Satellite Pro M70 stopped reading some DVDs, specifically verbatim...
    When I put in, it is just to see any disk. If I put the same disk into any other computer, even my friends Toshiba Satellite Pro M70 - than mine, even it reads normally.

    Any ideas?

    WEIRD laser could be at fault, or it is maybe dirty. Try to clean the lens with a Microfiber cloth.

  • Portege M400 - Windows 7 does not see HARD drive

    Hi, I have the problem, I am trying to install Windows 7 on my M400, but he didn't see the hard drive.
    The hard drive is surly ok, ' couse I tested it in the other netbook, I can see it in the BIOS, but any program installation can not.

    (I tried both Ubuntu and XP Tablet Edition)

    Hi Radzik,

    I think that Windows doesn't see the drive HARD due missing RAID drivers Windows needs of these RAID drivers before you can install it because it doesn t contain these drivers for the disk HARD is not recognized. You can download the RAID driver from Toshiba Web site.

    You can then create a new installation disc using nLite with drivers or copy the drivers on an external floppy drive. Start Windows XP after you press F6 to load drivers from floppy drive.

    Check this box!

  • Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

    Hi all.

    I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

    I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

    Thanks in advance.

    The problem is simple.
    Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

    The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

    In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

    Mayen a user manual would provide details on the management of records.
    If not, then contact the ASP in your country and ask some compatible devices!

    At soon buddy

  • Satellite U300 - Windows XP does not see HARD drive

    Hello

    I've updated the BIOS with the latest version, I've built a floppy with the SATA drivers, none of them work, XP Setup is not able to recognize the HD.

    Surprisingly enough the BIOS SATA mode option can not be seen.

    Any idea?

    Kind regards
    Lionel.

    Hello

    Not all BIOS contains the SATA option!
    In your case, I recommend the construction of a new CD of Windows XP by using the nLite.
    nLite is a free tool and allows you to include the SATA dirvers in the Win XP CD!

    Then you can use the new XP disk to start and new installation of the OS

    Search here in the forum! There is enough discussion on this procedure

  • I have a Macbook Pro which is not a hard drive.  How to install Adobe Photoshop elements 11 that came with the Epson scanner, I bought.  I registered S/N, and I can't find the free download anywhere alone trials.

    I have a Macbook Pro which is not a hard drive.  How to install Adobe Photoshop elements 11 that came with the Epson scanner, I bought.  I registered S/N, and I can't find the free download anywhere alone trials.

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • Satellite Pro C660 does not illuminate

    Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

    any suggestions?

    Hello

    On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
    After doing this connect the power running and try to start again.

    What happens when you do this?

  • The product key on my Satellite Pro P300 does not work

    The product key on my Satellite Pro P300 does not work.
    I entered the key from the sticker on the back of the computer. What I am doing wrong?

    Hello

    Why use this product key?

    Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

    Second, it's an OEM key and it will not work with other versions of Vista!

    Cheers mate

  • I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

    I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

    Can she be seen by disk utility (and which version of Mac OS X is)

  • Satellite Pro A10 does not start - no hard drive

    MY TOSHIBA SATELLITE PRO A10 PRIMER NOT.
    WHAT I GET IS NO DRIVE DETECTED. TRIED TO REINSTALL XP BUT STILL NO LUCK.
    CAN EVERYTHING-ONE PLEASE HELP AS I AM PULLING MY HAIR OUT TRYING TO THINHK HOW TO SOLVE THIS ANNOYING PROBLEM.
    DOES ANY - ONE KNOW WHERE I CAN DOWNLOAD A RECOVERY DISC SO I CAN TRY THIS OPTION.

    Hello

    HARD drive is visible in the BIOS?
    If this isn't the case, then this means that the HARD drive is faulty.
    Try to replace the HDD with a compatible and try again.

    Good luck

  • Satellite Pro M70-220: Microsoft Kernel DLS driver reinstall

    I'm having a problem with the "Microsoft kernel DLS synthesizer" (on my laptop Satellite Pro M70-220).
    that very well, I would appreciate some help to solve.

    My questions are in * "BOLD" type * at the bottom of this post.

    In the device under the "Sound, video controller & games" Manager type of device, I found a yellow exclamation point
    mark against "The Microsoft kernel DLS synthesizer".

    When I right click on the entry for device 'Microsoft Kernel DLS Syntheizer' and select 'Properties', the
    more info is given under the general tab:

    Microsoft kernel DLS synthesizer
    Device type: sound, video controller & game
    Location: Location 0
    Device status: Windows cannot load the driverfor of this hardware device. The driver may be corrupted or
    missing (Code 39)
    Click Troubleshoot to start the troubleshooter for this device.

    Before clicking on the resolution of the problems, I checked the info on the "Driver" tab, which is:

    Microsoft kernel DLS synthesizer
    Driver provider: Microsoft
    Driver date: 01/07/2001
    Driver version: 5.1.2535.0
    Digital signer: Microsoft Windows component Publisher

    When I click on the button "Driver Details" tab driver, the information given is:

    Microsoft kernel DLS synthesizer

    Driver files:
    C:\Windows\System32\drivers\D.music.sys
    C:\Windows\System32\drivers\lvusbsta.sys
    C:\Windows\System32\drivers\Tvs.sys

    Provider: Microsoft Corp.
    File version: 5.1.2600.5512(xpsp.080413-2018)
    Digital signer: Microsoft Windows Publisher

    On the 'Détails' tab in the properties box, the given info is:

    Microsoft kernel DLS synthesizer
    Device ID of Instance
    \DMUSIC SW\ {8C07DD50-7A8D-11D2-8F8C-00C04FBF8FEF}

    * Troubleshooting: *.
    When I click on the "store" on the general tab, a page "Toshiba Help & Support" is displayed.
    who gives the instructions to uninstall and reinstall the device. Uninstallation instructions are simple:

    Go to Device Manager > right to uninstall click Device > click Surdesinstaller > in the "withdrawal of the device confirm.
    Dialog box, click OK.

    My concern is with the "relocation of the device" instructions, which are:

    Close all programs > start the Add Hardware Wizard > click Next and Windows Search Plug &
    Play devices.
    If no device Plug & Play are found, a list of devices appears > click on "Add a new hardware device" > click Next > click
    "manually install the hardware that I select in a list" > click Next > in the "Common material Type" list
    Click the appropriate device category > click Next > in the manufacturers list, click the manufacturer of your
    device > in the "Models" list, click the name of the model OR click "have a disk, if you have an update or
    the manufacturer provided to install for your device driver > click Next and follow the instructions in the wizard
    to complete the installation.

    * Issues: *.

    * 1. What is "Microsoft DLS synthesizer" and what is its role? *

    * 2. Is "Microsoft DLS synthesizer" a device of internal device, as opposed to a 'Plug and Play '? *

    * 3. With respect to relocation instructions: *.
    * - what category of device "Microsoft DLS synthesizer" would be listed under? *
    * - in the list of "models", what the "model name" would be for the "synthesizer DLS of Microsoft? *

    * - for 'Disc' alternative option, where can I get/download a update or provided by the manufacturer *.
    * driver for "Microsoft DLS Synthesizer" of? *

    * - one disc 'a' Wizard allow you to select the folder on the hard disk that contains the *.
    * Downloaded (s)? *

    Note: I'm leaving the principle that the driver is corrupted so I'll have to download and install
    the uncorrupted driver.

    * Please indicate if there are any other installation information that I'm aware of.*

    Thank you very much for any assistance anyone who can offer.

    AlanCB

    Hello

    I've never heard of the Microsoft kernel DLS synthesizer and that's why I studied a bit.

    I found this MS developer site:
    http://msdn.Microsoft.com/en-us/library/aa940369.aspx

    It is said:
    The component of the Microsoft kernel DLS synthesizer provides the port of DMusic, content class miniport driver in the dmusic.sys file

    It seems that most of the problems with this kernel occur due to lack of SP2.
    If you have installed Windows XP you need to update the operating system to the State.
    All service packages must be installed!

Maybe you are looking for

  • How to get rid of mackeeper

    How can I get rid of mackeeper?

  • Share my screen with others

    I presented the tiara to some of my colleagues, a question arose that I could not answer.  Often, we need to work on some data by sending data by e-mail. Thus, the ability to share the raw data as well as the plots, comments, etc.  Among his collabor

  • Windows 7 driver for computer laptop hp pavilion dv6733tx/entertainment

    Hi, my laptop is HP Pavilion dv6733tx Entertainment Notebook, ORI windows is vista. but now I change windows 7 64 bit ultimate. but hp wep did ' t having win 7 driver. can I use driver vista backward as below?

  • several copies of explorer.exe

    I discovered eight copies of explorer.exe in my computer. most of them is version 6.1.7601.17567, however, some are version 6.1.7601.21669. There are also two different sizes: 2.49 MB and 2.73 MB. There are three files dates: 02/26/11, 25/02/11 and 1

  • SUP menu commands

    When I select a submenu.   FOR EXAMPLE. right click on an icon on the desktop and select run as administrator, say the command remains on the desktop and is not clear until a reboot.