Satellite Pro M70: Errror Message Power saver - code: 0x0

Whenever I start my Satellite Pro M70 I now get an error Toshiba power Saver.
It reads "Toshiba Power Saver A Fatal error has occurred. The program will be terminated code: 0x0.

Can anyone suggest how to get rid of it.

Thank you

Hello

It's not easy to say why this power saver utility error message, but generally a new installation of this tool should solve the problem.
Have you tried to reinstall the energy saver?

Tags: Toshiba

Similar Questions

  • Satellite A11-998: fatal error Power Saver - code: 0x7e

    I recently bought a Toshiba Satellite A11-998. I upgraded the operating system of Windows XP MCE to Windows XP Professional. As some of the drivers were not picked up, I was download the latest drivers from the Toshiba site, but when I install the Toshiba Power Saver, utility, I get the following error;

    "A fatal error has occurred. The program will end. "Code: 0x7e.

    The only option I is 'OK '. When I start the machine and Windows journal, I was invited with the same message, even, when I try and uninstall the energy saver utility. Is it possible to completely remove the utility, or can anyone suggest how to solve the problem. Any suggestions much appreciated.

    See you soon

    It seems that there is no general solution for this problem.
    I found some comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate the error message.

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11238&MessageID=40588
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9573&MessageID=33773

    But how did you install the entire operating system? Did you follow the installation instructions on the page of the Toshiba driver?
    The order is very important and necessary if you want to install the Toshiba applications on your operating system.
    I also discovered that the laptop uses Power saver power saver utility and driver.
    I think you need to first install the driver and utility.

    But everything should be described in the installation instructions

  • Satellite Pro A100 PSAASE: error Power Saver and LAN? After downgrade to XP

    Hello
    I have a toshiba satellite pro A100-psaase!
    I could not find this model on the toshiba site, so I chose the A100-psaas software.

    The laptop came with windows vista. I have it downgraded to windows xp, has chosen the psaas model so that I can download the drivers.

    I have 2 problems: the first is the eve of power software, it does not work. Start windows every time I get an error in the energy saver. I can not uninstall.

    My second problem is, that a windows pop who found a network controller and I can't find any software or driver for it. So in Device Manager, an exclamation point on the icon of the network controller.

    The funny thing is that I have internet and all.
    I can't find a solution to these two problems
    Thanks again

    Hello

    You have chosen the correct unit. The satellite Pro A100 PSAASE is the same model as PSAAS.
    I put t know why the power gain error appears, but for most of these errors occur because the tools and utilities have been installed in the wrong order!
    Seems that the installation instruction has been placed on the page of the driver Tosh! Read and follow the installation guide lines! Proper installation is important and necessary.

    The LAN drivers are also published on the page! There are 2 different versions. Try them both!
    The laptop supports a Lan Intel Ekron-R 82562GZ chip. Compatible drivers, you can also find on the Intel page!

    Good day

  • Satellite Pro 6100 and "Toshiba Power Saver.

    Hello!

    Is this OK to uninstall the saving of a SP6100 v5.04 as it doesn't seem to work properly or at all?

    I already check and change the BIOS v1.90 also accordingly power settings, but the machine still never power off of the hard drive and will go to standby sleep.

    The only things kind of work are the screensaver and power of the large screen, but very rarely according to the time where the settings...

    Best regards

    Pete v.

    Hello Pete

    I m wondering really the Power Saver doesn t work well on your laptop. This tool is one of the best tools designed Toshiba and it is very useful if you want to optimize laptop power consumption.

    I don't really know what the problem is here, but if you are not satisfied you can remove it from the system or simply use different power plan in power options properties.
    Maybe you should try to reinstall energy saver.

    Have you noticed another problem with your SP 6100?

  • Satellite Pro M70 usually power up when the AC

    Hello

    I bought my dad a Satellite Pro M70 for his birthday and it was used for about 3 months. All of a sudden without any reason that it not power up if it is not connected to the AC. The battery registers itself as 100% charged.

    When on AC, everything is fine no problem.

    But when it is not plugged into the AC, it lights. When put under tension however you can unplug the AC and it will all work very well again.

    Any ideas?

    Should I try a BIOS update? or does anyone have any other suggestions?

    Thank you
    Martine

    Hello

    This problem appears at the beginning?
    Sounds a bit like electroninc power supply malfunction and in this case, you should always ask the service provider to Toshiba for assistance.
    Don t worry, seems, the guarantee is valid and each procedure must be done for free.

    But I m interesting if this will help you:
    Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
    Check this option.

  • Satellite Pro M70: Noise with laptop OFF If power connected

    Hello

    I have the following problem with my new Satellite Pro M70.
    A strange volume low hissing sound that happens when the power is connected to the laptop.
    This noise occurs even with the laptop TURNED off when the power is connected.

    This sound can be heard in a noisy room, but is quite annoying when you work in a completely quiet room.

    Anyone else have the same problem?

    Hi Geo

    I presume that this adapter produce this noise. Am I wrong? Can you please locate the source of noise just?

  • -Power connector - Satellite Pro M70 of spare parts original purchase

    Hi all

    The power on my laptop Toshiba Satellite Pro M70 connector broke and my laptop is out of warranty...

    I want to buy a replacement part, where can I get an original piece of toshiba replacement?

    Here is a picture of the part:
    http://I264.Photobucket.com/albums/ii183/lkjh_g/IMG00055-20100131-1907.jpg

    Thank you

    Hello

    You can get all the spare parts Toshiba since an official authorized service provider. I n don't know where you life, but if you bought your laptop in Europe, you can find here an ASP in your country:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Just speak with technicians to get the right spare for you.

    Alternative under Feliks wrote that you can search on eBay for second hand parts. Sometimes you can get really good deals for this. ;)

  • Satellite Pro M70: Where to get the Mobile power adapter

    Can someone tell me where to find a removable card for this laptop that is to say one that can power the laptop from the car cigarette lighter charging.
    Tried a Targus one but kept power being interrupted. Returned it for a replacement, but even still... for all do but Targus please!

    Hello

    Try to google for this part number: PX1188E-1NPO for computer laptop adapter car 120W, 15V, 8A
    This car adapter must be compatible with the Satellite Pro M70.
    You can also order these parts of the Toshiba service partner in your country.

  • Satellite Pro M70 - stopped screen lights

    Hello

    My Toshiba Satellite PRO M70 screen lights.
    I don't know why, but sometimes when the screen is broken and I put it up it turns on, but after a few seconds it stops.

    It started a few days without something strange in my pc like hitting or something like that.
    I tried to connect an external display and it works weell.

    Anyone know why it cant pass or how fix it?

    Thank you

    Greetings

    Toni.

    Hello

    The Fn keys work?
    You can increase the display button narrowly by using the FN + F7 combination?

    Please also check the energy saving profile.
    Maybe the display brightness is set to a lower value in the power saver profile.

    But if you will not find anything unusual in the settings of the software, so I guess that the brightness display problem is related to the failure of inverter FL.
    The FL inverter controls the brightness of the screen, and this part needs to be replaced.

  • My Satellite Pro M70 itself turns off in the middle of the secuence of startup

    My Satellite Pro M70 itself turns off in the middle of the secuence of startup

    After turning on if it passes the test post and enters the menu grub (Linux + Windows) or BIOS
    without problems, but most of the time after the start of the BONE found in the start - up, suddenly it powers off the power.

    The problem becomes bigger and bigger as punishment I can boot any operating system

    As seen on messages more soon as I cleaned the vents of CPU with a spray suddenly sure I wasn't a problem of overheatting.

    Someone has an idea of what can happen?

    Thank you

    Hmm, the laptop passes the MESSAGE correctly and it stops during the initialization of the operating system. Is this good?

    Well, in this case I would exclude the RAM to malfunction.

    I put t also think that it's an overheating problem because the laptop should work a little longer until it would be closed due to high temperature.

    What about the HARD drive malfunction? Are you sure that the HARD drive is ok?

    In my opinion, you should check the HDD and maybe try another.

    Welcome them

  • Satellite Pro M70: buttons for internet and cd/dvd

    I have a portable Satellite Pro M70 with XP and - I believe - service pack 3. I bought it there is a little more than four years (Dec. 2005).

    There is a series of six buttons to the right of the keyboard, just below the power button. The first button has been programmed to launch my internet browser to a key. The other buttons have been to launch the media player and control CD/DVD discs (play, pause, stop, forward, backward).

    These buttons were a convenience, but for some time, they have not worked. I have no idea why. Can anyone help? Can they be fixed easily?

    > These buttons were a convenience but for some time, they have not worked.
    What does that mean? They are broken and do not work or you cannot start defined applications?
    Have you tried to set them using Toshiba control.

    You can start this application from Toshiba Assist > Optimize.

  • Satellite Pro M70 overheats and turns off

    Need to support some tech with this problem.

    Satellite Pro M70 constant over heating problem. After use of 20-30 minutes of normal (web navigation etc.) the bottom of the laptop becomes really hot near the fan, unbearably hot to the touch.
    If I play games or do whatever it is cpu-intensive, it will end by the smell of the burning and power off.

    All this time the CPU fan never turns! Just lets him get more hotter and hotter. Strange thing, that's when you start first upward, the spins of CPU fan for about 5-6 seconds to make it work! Already tried to clean it, was not very dirty, the fan is not stuck, it runs if you blow...
    Update I tried to the latest version of the BIOS overheating again...
    Tried all the toshiba utils for cpu temp monitoring etc., they indicate the CPU get more hotter and hotter much more of 60 c +, but none of them (or other 3rd party utils) can detect the fan...!

    Fix for that or is it just bad fan / design of the temp sensor?

    > Already tried cleaning...
    Yes, but how did you do that?

    In the past, I have separated three Satellite M70 notebooks and was surprised inside, how much dust has been placed behind the cooling rack. After notebook professional cleaning was much quieter and has been properly cooled.
    Maybe the grease thermal CPU and graphic should be replaced also.
    After a long period of use, it seems quite dehydrated.

  • Satellite Pro M70 - what HARD drive can you recommend?

    I have Satellite Pro M70 and I have a 60GB HDD that I see what it s SATA 8 MB of buffer memory. The processor it s 1.73 GHz. I see that there is the Samsung typical 160 GB and the Western Digital Scorpio Blue 160 GB at the same price, which is better?

    And for only $ 11 more there's a Scorpio blue Western digital 320 with even 8 MB buffer than other 2. But I don t think so 320, that's a lot for Satellite Pro M70, and I have an external drive 2.5 "250 GB, data with this is not problem.

    What the best solution for this laptop? I don t want to burn now the phone LOL.

    Thank you

    Hello

    If your laptop is already equipped with SATA interface, you can use each HDD with SATA1 or SATA2 port on the new SATA interface there is no limit on the old standard IDE

    It s your choice what HARD drive you buy because I put t know your needs, but in my opinion it makes no difference which manufacturing you buy the HARD drive. All hard drives are similar and there is no significant difference (performance).
    I made good experiences with Western Digital and Hitachi hard drives.

    By the way: you can buy a HARD drive with 7200 rpm or 5400.rpm. Latter is faster but requires more power. In my opinion, this is useful if you often work with large files.

  • Satellite Pro M70-220: Microsoft Kernel DLS driver reinstall

    I'm having a problem with the "Microsoft kernel DLS synthesizer" (on my laptop Satellite Pro M70-220).
    that very well, I would appreciate some help to solve.

    My questions are in * "BOLD" type * at the bottom of this post.

    In the device under the "Sound, video controller & games" Manager type of device, I found a yellow exclamation point
    mark against "The Microsoft kernel DLS synthesizer".

    When I right click on the entry for device 'Microsoft Kernel DLS Syntheizer' and select 'Properties', the
    more info is given under the general tab:

    Microsoft kernel DLS synthesizer
    Device type: sound, video controller & game
    Location: Location 0
    Device status: Windows cannot load the driverfor of this hardware device. The driver may be corrupted or
    missing (Code 39)
    Click Troubleshoot to start the troubleshooter for this device.

    Before clicking on the resolution of the problems, I checked the info on the "Driver" tab, which is:

    Microsoft kernel DLS synthesizer
    Driver provider: Microsoft
    Driver date: 01/07/2001
    Driver version: 5.1.2535.0
    Digital signer: Microsoft Windows component Publisher

    When I click on the button "Driver Details" tab driver, the information given is:

    Microsoft kernel DLS synthesizer

    Driver files:
    C:\Windows\System32\drivers\D.music.sys
    C:\Windows\System32\drivers\lvusbsta.sys
    C:\Windows\System32\drivers\Tvs.sys

    Provider: Microsoft Corp.
    File version: 5.1.2600.5512(xpsp.080413-2018)
    Digital signer: Microsoft Windows Publisher

    On the 'Détails' tab in the properties box, the given info is:

    Microsoft kernel DLS synthesizer
    Device ID of Instance
    \DMUSIC SW\ {8C07DD50-7A8D-11D2-8F8C-00C04FBF8FEF}

    * Troubleshooting: *.
    When I click on the "store" on the general tab, a page "Toshiba Help & Support" is displayed.
    who gives the instructions to uninstall and reinstall the device. Uninstallation instructions are simple:

    Go to Device Manager > right to uninstall click Device > click Surdesinstaller > in the "withdrawal of the device confirm.
    Dialog box, click OK.

    My concern is with the "relocation of the device" instructions, which are:

    Close all programs > start the Add Hardware Wizard > click Next and Windows Search Plug &
    Play devices.
    If no device Plug & Play are found, a list of devices appears > click on "Add a new hardware device" > click Next > click
    "manually install the hardware that I select in a list" > click Next > in the "Common material Type" list
    Click the appropriate device category > click Next > in the manufacturers list, click the manufacturer of your
    device > in the "Models" list, click the name of the model OR click "have a disk, if you have an update or
    the manufacturer provided to install for your device driver > click Next and follow the instructions in the wizard
    to complete the installation.

    * Issues: *.

    * 1. What is "Microsoft DLS synthesizer" and what is its role? *

    * 2. Is "Microsoft DLS synthesizer" a device of internal device, as opposed to a 'Plug and Play '? *

    * 3. With respect to relocation instructions: *.
    * - what category of device "Microsoft DLS synthesizer" would be listed under? *
    * - in the list of "models", what the "model name" would be for the "synthesizer DLS of Microsoft? *

    * - for 'Disc' alternative option, where can I get/download a update or provided by the manufacturer *.
    * driver for "Microsoft DLS Synthesizer" of? *

    * - one disc 'a' Wizard allow you to select the folder on the hard disk that contains the *.
    * Downloaded (s)? *

    Note: I'm leaving the principle that the driver is corrupted so I'll have to download and install
    the uncorrupted driver.

    * Please indicate if there are any other installation information that I'm aware of.*

    Thank you very much for any assistance anyone who can offer.

    AlanCB

    Hello

    I've never heard of the Microsoft kernel DLS synthesizer and that's why I studied a bit.

    I found this MS developer site:
    http://msdn.Microsoft.com/en-us/library/aa940369.aspx

    It is said:
    The component of the Microsoft kernel DLS synthesizer provides the port of DMusic, content class miniport driver in the dmusic.sys file

    It seems that most of the problems with this kernel occur due to lack of SP2.
    If you have installed Windows XP you need to update the operating system to the State.
    All service packages must be installed!

  • Re: Satellite Pro M70 - high utilization of the processor - low Performance

    I sincerely hope that someone can help you. I do not consider myself really computer illiterate, but this is where my understanding ends and I really value any assistance.

    I have a Toshiba Satellite Pro M70 for 2 years and I'm a final Defender to Toshiba. However, my operating system is slow. Average day use with Internet Explorer and Office 2007 is a laborious process that takes too much time. I have had conflicts with Trend Micro Internet Security 2008, that works perfectly.

    But turn on the computer takes forever. The CPU usage is generally high and System Idle process as well. I reinstalled Windows XP from the Boot Toshiba DVD already 4 times to nine and install everything over and over again. Each time after all to speed once again, performance is disappointing.

    I expanded RAM to 1.49 GB that makes little difference from the original 1/3 of RAM. It seems that something is slowing down the computer, but it is not visible in the process; but a certain process of svhost.exe who have the ability to handle little or the CPU usage.

    I've used Windows Gold Certified Uniblue Power Suite with a good registry cleaner. This helps a little, but after a few days, it seems only make it worse. I have a processor Intel Pentium M 1.73 GHz. search online reveals that Trend Micro IS 2008 is pretty good and demanding little capacity compared to the competing security packages.

    Is this system/software related or it could be a hardware problem?

    Thanks in advance to all!

    Hello

    I doubt that it could be a hardware problem, I mean a CPU usage can get if a certain service or applications would be run in the background of the OS.

    Generally, Antivirus applications are a kind of software that could cause this problem I had a Norton System works installed on my laptop and this software needs a lot of resources that slowed down the laptop
    In addition, some applications of Toshiba which are installed and running in the background may affect performance. But these applications are required to be able to use all the features of the laptop

    However, in msconfig you could disable.
    Launch msconfig-> Startup tab and disable some processes that are not necessary for you.

    In addition, you can use the CCleaner to clean the registry and operating system

Maybe you are looking for

  • where I can down load the mdismpx.sys file

    When I try to register my GPS upor, it asked me to download the MDISMPX.sys file, can someone tell me where I drop can I load?

  • BlackBerry Classic bluetooth voice dialing

    My new Blackberry classic makes me crazy.  My phone does not include orders when using the bluetooth in my car (Toyota Rav4).  He then said he has 12 results for one person (not possible).  Or he does not understand?  Then when the call finally passe

  • Persistence of application data

    Hi, guys Struggling for a while with the fallowing problem: I have a fairly complex data (a tree) structure that contains the data to a file structure and some additional info. I'm the persistence it. (Implementation Persistable and everything is fin

  • Windows 7 - not true

    Separated from the previous post as problem is unique to that user. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/copy-of-Windows-not-genuine/e5371d20-7127-4340-8564-1f50715889c1?page=6&msgId=e2d9f1f7-fda9-47E3-9b20-4dd4d

  • Check disk is cancelling

    I tried several times to plan an audit of my 'C' drive, but after rebooting, checking cancels out every time. The good people of suggestions?