Satellite Pro M70: How to connect to the internet using a second computer

I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

The virus could have damaged the Ethernet controller, or she affected somehow?

Is it possible to test?

Have you advice?


The virus was detected on the laptop you so maybe your PC has also been affected.
Did you check if the laptop and the PC using the same workgroup?

XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

Maybe it helps

Tags: Toshiba

Similar Questions

  • Satellite Pro L300 does not connect to the internet using a broadband


    I reformat my laptop with Windows 7 a few days ago.
    When I tried to use a broadband internet connection, it won't work.

    Pls help me on this.
    Thank you.


    I assume you are talking about WLan.
    You have installed Win 7 as a new OS.
    Have you installed good WLan driver?
    The WLan card is recognized in Device Manager?

    If so, have you turned on the wireless network adapter by using a switch in front of the laptop, and FN + F8?

    LAN working properly?

  • Satellite Pro A40 can't connect to the WLan using the Win XP

    Hi all

    Newbie on your site so thank you in advance for your answers ;-)

    Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

    Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

    It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

    Any ideas please?

    Thanks Mike


    First of all, you must update the WLan driver.
    I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

    In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
    If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

    Last but not least, you can try to use this command in a DOS (CMD)
    Ipconfig / renew

    Big names

  • Satellite Pro L510 - unable to connect to the Internet

    Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

    What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.


    > now unable to connect to the internet
    Can you write more than one sentence about your problem?

    Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

    Sorry, but without this information there s no end of discussion

  • Satellite Pro M70: Unable to connect to the WLan with ConfigFree

    Salvation in the Forum.

    I have problems with a satellite Pro M70, about gaining control of wireless connections.

    When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

    When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

    Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

    If you are familiar with this problem or something like that I'd be please to know.

    Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

    > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

    It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

    Please check if one of the two control the WiFi network tools and turn off!

    > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

    You should have three different tabs in the utility Configfree.
    The second device settings provides the list of devices, and you should see the wireless network connection.
    Choose and use the button network connections.
    There you should find some encryption settings!

    Also check the profile settings tab and the option called security settings

  • Satellite Pro A100 does not connect to the internet if the power adapter is plugged

    I have a Satellite Pro A100
    The machine will connect to internet on battery OK. However, if the power supply is connected it does not connect. Any ideas?
    See you soon


    How do you connect to the internet? With the WLan or cable LAN?
    It s very unusual as the intermits connection when the power adapter is connected.

    This question appears because you buy the laptop?

  • Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

    Hi all

    I had a very big problem with my card.
    I can t connect to the internet.
    I searched the forum but without any determination :(

    I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
    Someone said too
    "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it red├ętecte this new")

    How to disable the modem?
    And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
    I put t even know that :(

    Help me


    The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
    LAN driver can be found on the page of Realtek.

    You ask how to disable the modem? I think you mean how to reset modem DSL
    Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

    If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

    Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

    All that s

  • Satellite Pro A100 - unable to connect to the internet

    I'm unable to connect new Satellite Pro A100 to my youngest daughter to the internet.
    I have a cable modem Netgear DG834 router that works perfectly with my desktop pc and laptops other two of my daughter.
    I checked all the settings, but to no avail.

    Can anyone suggest anything that could restore the balance of my household!

    How have you tried to connect the laptop to the router?
    A you connect using a LAN cable?

    Are the firewall enabled?

    Please publish more details!

  • Satellite Pro A10 - unable to connect to the internet

    I have an old Satellite SPA10 who lost the internet connection a year ago.
    The components in question are:
    Ethernet controller
    Network controller
    Video controller
    Video controller (VGA)
    I tried many attempts to install drivers to replace those already on, but each attempt failed. Toshiba downloads, I used were from the following link:
    NES & action = sea...
    I use a desktop computer that is ok, although it has its own flaws and want to return to the use of the Satellite.

    Any suggestions please?
    (With the help of Windows XP)


    This old model of laptop is supported for Windows XP Home edition and Windows XP Home edition is not supported by Microsoft more.
    In any case if you want to have good working machine I recommend to do clean install of Windows XP Home edition.
    After doing this you also install all the necessary drivers and tools and utilities.

    This laptop model was offered with Windows XP Home SP1 edition at this time.
    You have Windows XP Home edition installation disc? Is the new installation of Windows XP Home edition an option for you?

    If so, I can help you with this and send you the order of installation exact for the drivers, tools and utilities.

    One last thing: you have the original installation of recovery disc?

  • OfficeJet Pro 8610: How to connect to the internet.

    I have my printer connected with a USB cable, but the info. says I can't connect to the HP eprint site. Is there a way to do this? What info. I can find says I can't divide just the cable my computer the printer must have its own IP address. will be a book of crossover cable or a possible someother wiring installation?


    Pat Hagar


    I don't know what is. Looks like you need to a router or switch that allows to connect several devices. My suggestion: buy a wireless router with LAN a few ports, you can connect modem and use it for wired connections and wireless

    In the image below, you can se the router (R) (M) modem. You can connect your computer to the router and you can connect your printer using LAN cable or wireless. You can connect other computers, Tablet (s) or smartphone (s) to the same wireless router.

    To help in this way, your printer can connect to Internet.

    Kind regards.

  • Satellite L735-10V - unable to connect to the internet using ethernet

    I have problems connecting to the network via ethernet.
    connect the ethernet cable and the laptop connects to the net, but after a few seconds it disconnects.
    I don't know what the problem is.

    I tried to disable TCP/IPv6 and it doesn't work.
    Please can someone help me here.

    It's just killed me.

    It is not easy to say what may be the problem.
    Have you noticed the same thing using WIFI?

  • Satellite P200-1EE - how to connect to the device using Belkin Mini Bluetooth Adapter

    Please can someone help with my problem.

    I am running Vista sp2 and just bought one of these adapters.
    Tried to load the software and I'm having problems.

    This icon appears in the system tray, but no icon on the desktop.

    Now I have 3 other computers running XP and have installed the software without problem.

    Belkin has called this afternoon and they recommended their virtual software but this has not solved the problem.
    Tried the Broadcom website and download their latest software but still no joy.

    Without the software, I can't pair devices to the computer, but I can print for my C5380.

    Someone had a similar problem?
    What is annoying is that they use a Toshiba laptop like the screenshot in the installation guide.


    OK, I worked in a solution.

    The software cd has a file for windows like vista

    The windows folder installs an earlier version of the software, but it works with vista.

    The vista software does not.

  • Re: Satellite P50-A14G - unable to connect to the internet using a wired connection

    On my laptop, Satellite P50-A14-G, I can't connect to internet via wired connections.

    WiFi does not work properly, but not the Ethernet card. It has not any light when I connect the wire, and I realized that on the Panel of the map icon does not appear.
    My OS is Windows 8.1 update 1.


    Have you checked status LAN card in Device Manager?
    Please make sure you that network card installed, listed and active properly.

  • How to connect to the internet using the modem from verizon

    I recently bought T400 with verizon WWAN modem and I couldn't use it outside of US.

    Can it be done? (using the modem with SIM card other than verizon)

    Thank you for your response.

    All ready, I manage to get the GPRS connection through my local SIM card.

    I'll upgrade it (to 3G) in order to obtain the higher connection speed.

  • Satellite Pro M70 usually power up when the AC


    I bought my dad a Satellite Pro M70 for his birthday and it was used for about 3 months. All of a sudden without any reason that it not power up if it is not connected to the AC. The battery registers itself as 100% charged.

    When on AC, everything is fine no problem.

    But when it is not plugged into the AC, it lights. When put under tension however you can unplug the AC and it will all work very well again.

    Any ideas?

    Should I try a BIOS update? or does anyone have any other suggestions?

    Thank you


    This problem appears at the beginning?
    Sounds a bit like electroninc power supply malfunction and in this case, you should always ask the service provider to Toshiba for assistance.
    Don t worry, seems, the guarantee is valid and each procedure must be done for free.

    But I m interesting if this will help you:
    Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
    Check this option.

Maybe you are looking for