Satellite Pro M70 - stopped screen lights

Similar Questions

• Satellite Pro M70: projection screen has a bad wobble

  Using a Satellite Pro M70 with a model of multimedia projector Sanyo PLC-XF41, the image on the projector screen has a bad deflection, as if the refresh rate was wrong. Have you checked the laptop shows the parameters - can anyone help please?

  Hello

  As far as I know it of not possible to change the refresh rate.
  In addition if the projector doesn't work properly, you must change the recovery settings.
  Try this option. I read that in most cases, this procedure allows.

• Satellite Pro M70: "Caps lock" light will not stay

  After repairs to toshiba in my brand-new laptop pro M70 (System Board has been replaced) I noticed that the caps light does not work when the caps is on. The bulb works as it lights up when you press the caps, but there are not on.
  Although the installation of ceiling works I don't know when the caps lock button is enabled or disabled. Very confusing.

  Any help is greatly appreciated. I am running MS windows XP pro.
  Brendan was soon

  Hello

  You suggested that this light doesn t work since the replacement of the motherboard.
  Am I wrong? In my opinion this is something mechanically. Can not solve yourself.
  In this case I recommend to contact the ASP again and explain the situation. Generally, the warranty should cover the repair procedure.

• Satellite Pro M70: the screen is blank after plugging AC adapter

  When the low battery alert lights and I plug in the power adapter, quite often, the screen turns white and the keyboard does not work. The only option I have is to turn off and turn back on it.

  Does anyone else have this problem and if so, is there a solution for this?

  Hello

  This looks like something wrong with the display driver.
  Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
  Check this option.

  Maybe it helps.

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.

• Satellite Pro M70 does not read the DVD of some manufacturers

  Recently, my Satellite Pro M70 stopped reading some DVDs, specifically verbatim...
  When I put in, it is just to see any disk. If I put the same disk into any other computer, even my friends Toshiba Satellite Pro M70 - than mine, even it reads normally.

  Any ideas?

  WEIRD laser could be at fault, or it is maybe dirty. Try to clean the lens with a Microfiber cloth.

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• Satellite Pro M70 - wireless has stopped working

  I have a Satellite Pro M70 and the wireless stopped working. The yellow light lights up for a few seconds for the machine to wake up but then turns off. I rebooted several times, but that did not help. In your reply please clarify abbreviations - thank you!

  Post edited by: boston1

  Hello!

  Have you tried to update the driver WLAN? You can find it on the Toshiba site or portal driver WLAN:
  http://APS2.toshiba-tro.de/WLAN/

  Have you checked for yellow exclamation marks Device Manager?

  Check if the laptop WLAN switch lights up and I can disable/enable WLAN with FN + F9 on my Satellite phone.
  Check it!

  Good bye

• Satellite Pro M70 - screen is blank

  Hey guys,.

  Have had my Satellite Pro M70 for more than a year now and never gave me any problems before. On about 3 times now, the screen disappeared all of a sudden completely gray and white and stays that way, unless I restart and is so very well.

  Appears to be spontaneous, can't everyday and not even aware if his reason leaving for a long time.

  Ive noticed that more than half of the screen flashes from time to time but don't know if it's because it's on during a long period or heat related but only started to do this recently.

  It just seems to be a problem with the monitor, like running programs under were unaffected (IE if I was running MSN messenger and the screen went gray, I could still type messages, etc just not see them!).

  Have the latest graphics driver for my Intel knowledge: 6.14.10.4363, don't know if it could be a problem with the card? Hepatitis a lot of free hard disk space, seeking to increase the ram (currently 512) suggestions?

  Hello

  I am very happy that I don't have these problems on my Satellite M70. I recommend you test your laptop connected to an external display to see if the symptoms are the same. If so, I fear that there is a problem with the graphics card.

  On the RAM, can I just say that your laptop can handle with max 2 GB RAM and compatible RAM modules are:
  512 MB (PA3412U - 1 M 51)
  1 GB (PA3411U-1M1G)

  Good bye

• Satellite Pro M70 - mousepad stopped working

  The internal mouse on my Toshiba Satellite PRO M70 pad went dead. The cushion or the two buttons mouse work. It still works with an external optical mouse.

  Is it possible to test the mat mouse internal or re - install a driver for it?

  Hello

  Are you sure that the mouse pad feature is not disabled by using the FN + F9 key combination? Please check this box.

• Satellite Pro M70: buttons for internet and cd/dvd

  I have a portable Satellite Pro M70 with XP and - I believe - service pack 3. I bought it there is a little more than four years (Dec. 2005).

  There is a series of six buttons to the right of the keyboard, just below the power button. The first button has been programmed to launch my internet browser to a key. The other buttons have been to launch the media player and control CD/DVD discs (play, pause, stop, forward, backward).

  These buttons were a convenience, but for some time, they have not worked. I have no idea why. Can anyone help? Can they be fixed easily?

  > These buttons were a convenience but for some time, they have not worked.
  What does that mean? They are broken and do not work or you cannot start defined applications?
  Have you tried to set them using Toshiba control.

  You can start this application from Toshiba Assist > Optimize.

• Satellite Pro M70-275 - where is the lid switch?

  Hei,

  I have problem with backlight in my laptop (Toshiba Satellite Pro M70-275). I think that the problem will be solved completely if I find where is the button of the cover.

  I hope someone can help and guide me to the location of the switch.

  THX

  Hello

  Are you sure that the problem is the lid switch? Normally if the backlight doesn t work on the screen inverter FL needs to be replaced.
  What happens if you connect an external monitor to the laptop? You see an image?

  The FL switch is normally placed under the cover of the display. It s a little trickier to Exchange because it is necessary to remove the plastic cover of the screen.
  Maybe you should ask a technician for laptop to help.

• Satellite Pro M70-220 - how to start the Advanced Boot Menu

  Which key have to press on my Satellite Pro M70 - 220 starting Win XP, in order to enter the "Advanced Start Menu" - in other words, the menu that gives various boot options, such as safe, last good start Congiguration, start Windows Normal Mode, etc. ?

  On my old laptop Satellite 5105 - S702, it was the F8 key, but by pressing the F8 key on my M70 Pro does not bring up the 'Start Advanced Menu".

  The Advanced Start Menu came on its own a few days previously after an abnormal stop, so it seems that it does not exist on the M70 Pro.

  Thanks for any advice anyone has to offer.

  AlanCB

  Hello

  The Advanced Boot Menu can be reached by pressing the F8 key.
  It s a Windows menu basic and it s any laptop it is.
  It should work on all computers.

  Maybe you can not activate the Start Menu advanced because the Windows operating system is confused upward.

• Winamp and shortcut keys on Satellite Pro M70 - 109

  I just bought a Toshiba Satellite Pro M70-109 today.
  And I can't get my shortcut buttons (Play, Stop, next, previous) to work with winamp. And when I press the Play button, Windows Media Player will appear...

  Anyone know how I can fix the problem?

  This isn't a problem!
  It seems that everything is on your laptop.
  As I know the buttons has been configured to use Windows Media Player and WinDVD DVD media has been inserted

• Expanded for Satellite Pro M70 PSM75E memory

  I need memory paged to my Lotus Symphony programs.
  But it does not work in this PSM75E-009005DU Toshiba Satellite Satellite Pro M70 with Windows XP.
  On my desktop with XP, it works... I can set it up in preferences shortcut on the screen.

  If you want to upgrade the memory?

  As far as I know, Satellite Pro M70 PSM75E was equipped with different processors and chipsets for upgrade memory can depends on model that you bought

  But I think you could increase the RAM up to 2 GB of RAM.
  You can use the modules of 533 Mhz 200pin 2 x 1 GB of RAM.