Satellite Pro P100-293 sound work!

Similar Questions

• Satellite Pro P100 - no sound

  Hello.

  I have a Satellite Pro P100, the sound worked fine for the past 1½ years, but suddenly he disappeared.
  When windows all seem to be in order, but no sound out of speakers.

  Material can I cut my speakers?

  Oh, btw, I tried to plug in a headset, they have been too silent.

  Thank you

  Wolfgarnet

  Hello

  Did you check if mute is not activated?
  You can turn on or off the mute using the FN + ESC.

  You can also check this-> sound control panel

  More I recommend the Device Manager if some yellow exclamation points are visible near the sound card.
  An audio driver update would be too good.

• Satellite Pro P100-439: sound and modem driver for Windows XP?

  Hello

  I need for my his laptop and drivers for the Modem.

  Thanks for the help

  Edit: I come from Germany, sorry for my bad English. :)

  I presume you bought Satellite P100 and no Satellite Pro P100. Am I wrong?

  In any case, if your P100 laptop is Vista preinstalled laptop, you may have problem because right now all new laptops Vista are not taken WXP supported. Of course, it will take a little time to have drivers of Windows XP Home edition.

• Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

  Hi all

  I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:

  -L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)

  -No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
  In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)

  Thank you all

  Hello

  1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!

  2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)

• Satellite Pro P100 (PSPA4A-005002) - no sound after installing Win7

  I've updated my laptop Satellite Pro P100 from Windows XP to Windows 7. I ran the custom installation of Windows 7 while I did not any problem of Windows XP system and I used a separate hard drive. This way I can reinstall the hard drive with XP and go back and use XP if I am not satisfied with Windows 7. Among the problems I encounter is that I can't ge the noise at work.

  The speaker in the lower right corner icon has a red x on it. In Device Manager, the high definition Audio Device a "this device cannot start. (Code 10) "in the State of the device. The driver installation of guard is the version "Microsoft 6.1.7600.16385 version dated from 13/07/2009" driver. I tried to install the driver (Vista) recommended in the page Web of Toshiba "Upgrade your Toshiba PC to Windows 7". This driver has not worked. Windows also displays the error message "Driver Installation rating: could not find the media for this driver device.»

  I searched the web high and low and all the recommendation I found does not work.

  If someone has encountered this problem and have you found a solution?

  Hello

  Maybe you used the wrong audio driver. The 10 error always appears if an incorrect or incompatible driver was used.
  I recommend the audio driver again.

  As far as I know the laptop supports a Conexant audio chip.
  There are some models of different laptops that support the same sound chip.

  See the European driver of Toshiba page and choose for example the Satellite P300
  This assumption of the model driver audio Conexant and I recommend that you install this driver!

  Welcome them

• No sound on Satellite Pro P100

  Hi all

  does anyone know how to get the sound on your laptop. I have a new Toshiba Satellite pro P100 with Windows Vista. I have no sound after installing Service Pack 1. But my speakers are turned on, and I see the noise level through control system / sound /.
  Speaker test does not work. There is no sound on my headset too. Any help will be appreciated, would be well as soon as possible.

  -Axel

  I always use my laptop without SP1 and have no such problems.
  Have you tried to install the latest version of the driver sound Toshiba support page?

• Satellite Pro P100 - sound does not when I try to use Gentoo

  Hi guys,.

  I have a Satellite Pro P100 (model: PSPA4E). I tried to get Gentoo working on it, but can not get the sound to work. In my attempts to get the operation, I've upgraded to v3.5 (some recommended forum) Bios. The sound still does not work.

  Has anyone got the same laptop and managed to get the sound to work? Or can someone advise me.

  Thank you.

  Hello

  How you try to do a little sound? With alsa? Usually you must first compile your kernel for alsa soundcard and support you as a module, then alsa can load this module when you run alsaconf user-space to configure your sound card.

  I had gentoo on my server before migrating to ubuntu server edition and I find after working with several systems of derivatives, and bsd linux gentoo is too complicated, especially regarding him emerge and trees.
  I tried to install software that was not in the portage tree correctly and the path is too long for some external incoming traffic software.
  Then based on debian.

  Welcome them

• Satellite Pro P100-438: how to disable the CapsLock NumLock or Scroll sounds

  Hi out there,.

  How can I disable these "ugly" notification sounds when I press CapsLock NumLock or Scroll?

  It's a Satellite Pro P100-438. Does anyone have any suggestions?

  Thank you

  It's pretty easy mate.

  Follow these steps:

  -Keep right SHIFT> key for about 10 seconds.
  A messagebox will appear (FilterKeys settings) and offer a menu:
  -Click the [settings] button and a new window will appear.
  - Remove the tag [x] of [Use ToggleKeys].
  -Click [OK] to save your changes
  You're done :)

• Re: SD card reader works only on Vista - Satellite Pro P100 pspa4

  Hello

  I have a Toshiba laptop Satellite Pro P100 pspa4 with Vista installed.
  I have my SD properly installed host adapter (well looks like in Device Manager)
  But absolutely nothing happens when I insert an SD card.

  I have a Mass Storage Controller not properly installed and I think that's the reason why, but I can t find any drivers for it.

  On XP, everything works fine.
  Anyone know where to find the drivers for that?
  On the Vista from Toshiba driver page I can only find drivers SD utilities.

  Thank you

  Hello

  On the European driver Toshiba page, you will find the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Try to reinstall and the SD card should work!

  See you soon

• Satellite Pro P100: horrible clicking, jerking and occasional crackling sound

  My machine is a beloved Satellite Pro P100 (with funky orange cover).
  My niggle, becoming a regular pub was the theme of mine, it's that play card Conexant High Definition Sound one clicking horrible, jerky and occasional crackling sound.

  I did the usual updates and the latest driver BIOS and installed equipment.
  No joy, still more trouble for the people of The Black Horse.

  Speakers, something overheating, loose screws and all the wrong cover color were advanced as the other sources of the problem.
  Even more fatigue, mental and even a suggestion I continue this conversation in the company of people who actually care!

  Anyway, here's my last.
  I don't get the problem when playback of .wmv files, for example, the bear fishing video sample that comes when you install Vista.

  MP3s and FLACs and sound just as WAVs scratched vinyl, but the bears fishing, nice and crispy...

  Hello!

  Have you tried external speakers on your laptop?
  It could be a hardware problem, but if you test other speakers you can determine if it s a sound card or a s question House speaker. Check it!

  And have you checked all the sound settings in Windows? Maybe you can find a setting wrong in equalizer or elsewhere.

  Have you tried to reinstall the notebook using the Toshiba Recovery disk? It contains the factory settings and you should try this before contacting an authorized service provider.

  Good bye

• Satellite Pro P100 - BIOS 3.80 with ACPI and the sound?

  Is the problem with the GPU fan resolved? Can I use ACPI and its now also without hacking DSDT?

  Satellite Pro P100 - Modell Nr.: PSPAHE - 002001GR with the 3.80 BIOS

  Post edited by: renewehle

  Hello

  I put t know any problem with the graphics card, cooling module, but I found this thread on a similar theme.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22998

• Downgrade from Vista to XP on Satellite Pro P100

  I have a client with a model of laptop Toshiba No. Satellite Pro P100-434.

  He had a recurring problem, DVD playback that vibrates with the image and the sound is not always in line with the image. He referred twice to Toshiba and they told me that they had replaced the DVD drive. The fault was still there so he brought for me to watch.

  I thought it is best to see if the Windows XP installation would cure the problem so installed an of my licenses. He tried for a few weeks and is now happy with our performance. Then I reinstalled Vista and checked for updated drivers. The problem is back as before.

  Now, the customer wants to downgrade to Windows XP. I understand that it is possible, but have been unable to find out where I should apply for the XP product ID. My client feels terrible about the way it has so far been Treaty by Toshiba and who also believes he paid a Microsoft Windows license. He shouldn't have to pay for another. Any help would be appreciated.

  Hello Peter

  I read your ad with a lot of attention and also hope that we can discus things.

  At first, I must say that laptop must be Satellite P100-434 with PSPADE part number. If you want to check the DVD functionality test it with original recovery image. Achieve the clean OS install and test with the original DVD movie using pre-installed software. In my view, that it must be of WinDVD. Win DVD is used by Toshiba for a year, and this software works very well.

  If there is a problem with the DVD drive, please clarify this with the authorized service partner. Please note: test the full functionality of DVD player.

  Something about WXP: Toshiba supports Windows XP Home edition for this model of laptop and all the drivers, tools and utilities that you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. Before you start to install anything whatsoever from this page to the first a download? Instructionsa facilities? document and install all the stuff following this order of installations. It is very important.

  Now something about the COMPUTER products and treatment of Toshiba: with the new notebook, you purchase a license for the operating system preinstalled. This does not mean that you have? specific? key and can activate all that you want. The alternative operating system to pay for the license. Each copy has own product ID. And don't forget, your customer has misunderstood something.

  Treatment of customer is very interesting topic, but one thing I can say for sure: a lot of people hear things that they do not want to accept and is for the most part, the grounds for claims on a? bad treatmenta?. It is very important to clarify everything and avoid all the problems.

  Good luck!

• Satellite Pro P100 - 11(d) crashed and Linux does not load

  Hello.

  I have a Satellite Pro P100 - 11(d) which have worked well since 2007 both with preinstalled Windows and Ubuntu last.

  But... Yesterday, Firefox crashes, I thought, but after the restart it was not able to load Ubuntu desktop, comes from a command prompt.

  I tried to reinstall the driver and xserver with no luck.
  Tried to reinstall Ubuntu together, but it stops while loading of Ubuntu live.

  Thought maybe, a hard drive crash so I want to wipe the entire hard drive and so reinstalled Windows, which wouldn't load after installation. Changed the hard drive to a WD250GB, but always the same - stop loading live Ubuntu and Debian and Meego...

  Has a verified memory from the live USB of Ubuntu (before loading Ubuntu), no errors.
  I have an idea that maybe the graphics, but it has no errors or defects to display install screens - graphics.

  Anyone have any ideas?

  Oh, I had Ubuntu while loading, try checking the hard drive and what makes some mistakes, why I thought it might be a hard drive problem.

  Thanks in advance
  Leif

  Hello

  What about another system? Windows?
  Can you start and install Windows system using the Toshiba Recovery disk?

  Generally speaking, it is not easy to say what has caused this problem
  It may be related to no hardware, a part even if the HARD drive or memory error was not detected, one of these parties may malfunction
  Worst case its something wrong with the motherboard but it s only a hypothesis.

• Satellite Pro P100-327 (PSPA4E) - none follows her Win 7 clean installation

  Hello

  I just clean installed Win 7 Home Premium (64 bit) on a Satellite Pro P100 - 327 (PSPA4E) which was bought in November 2006. He was previously under XP. I never installed Vista, even if the laptop is Vista Capable badge.

  I followed the recommended order of installation of the bios/driver/software Win 7 but I have now no sound at all. Everything I've tried so far has failed to fix.

  The laptop has a Conexant based with harman kardon speakers audio solution. Win 7 installed the following driver, which brings the info.

  High definition Audio Device (Microsoft Driver version 6.1.7601.17514 as of 11/19/2010) and status of the device: this device cannot start. (Code 10)

  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000 HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31

  There is a second exclamation mark in device for a more Manager unknown device / uninstalled the device driver with an ID of ACPI\SMCB000 material (display code 28) but I don't know what is this device!

  Anyone have any suggestions on a fix for my sound problem?

  Thank you!

  Martyn

  ACPI\SMCB000 could be the infrared device.
  Perhaps his need in order to use the remote control.

  I also looked for VEN_14F1 and DEV_5047
  It seems to be the HDAUDIO Soft Data Fax Modm SmartCP of Conexant
  http://www.PCIDatabase.com/search.php?device_search_str=5047

  I checked the page of the Toshiba driver for Win 7 drivers for similar laptops Sat P105-xxxx and found the driver here:

  [Drivers of Toshiba U.S. page | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598605& rpn = PSPADU & modelFilter = P105-S6227 & SelCategorie = 2756709 & selFamily = # 1073768663]

• Satellite Pro P100 - Synaptics touchpad problem with Win 7

  Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
  The original driver had an option "disable when the external pointing device connected.

  I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

  It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
  So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

  Thank you

  Hello

  Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
  Choose the touchpad Win 7 drivers out for a satellite L500 series.

  By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.