Satellite Pro P100: Bios Update went wrong - what to do?
I have a satellite pro p100 with win xp.
I downloaded the bios-update victory.
something is worng. the laptop was closed and when I try to start it,
I blackscreen, do not see anything, windows does not start.
Please help me, I write my degree and really need to resolve this problem quickly.
so if your machine does not start then you need to send/bring your machine to the next partner service authorized in your country.
Here´s a link to find one and I suggest you to contact one of them immediately because of your degree:
Is the problem with the GPU fan resolved? Can I use ACPI and its now also without hacking DSDT?
Satellite Pro P100 - Modell Nr.: PSPAHE - 002001GR with the 3.80 BIOS
Post edited by: renewehle
I put t know any problem with the graphics card, cooling module, but I found this thread on a similar theme.
I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.
I went to see the Web for Chris Bios recover.
Have over 20 versions, but so far without success.
My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
Flash or SD ended in failure.
The laptop is: Satellite pro U400 PSU45E
Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...
Every idea can be useful!
Thank you very much
Excuse my English
f the subject isn't here, please redirect mderatora
This is my 1 post here
Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP
I hope that the ROM BIOS module is not too bad
In the worst case that the mobo is damage but maybe it s not damaged
However. You must contact a local ASP and must ask for the manipulation of the Fryer!
Hi, I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
If I look at the ram using a tool of information system (cpuz or aida320), it shows she doesn't move at the speed of 667 mhz but at 533 mhz.
As you can see from this screenshot the memory runs at the real speed is less than the maximum that the sticks have a rated power.
Its running at 266 mhz (533 mhz ddr) where it should be run at 333 mhz (667 mhz ddr).
I also noticed that with this laptop fan never seems to come, is it possible to mount the fan?
Whenever I have the laptop for more than 30 minutes, it becomes very hot.
> if I look at the ram using a tool of information system (cpuz or aida320) it shows that it does not run at the speed of 667 mhz but at 533 mhz.
What is your FSB?
If the laptop was equipped with memory PC2-5300 modules then they could run at 667 MHz, but only if the FSB would supports 667 MHz! I think is supported by the FSB of 533 Mhz.
So I can't say it s nothing wrong!
> I just bought a Satellite Pro L40 laptop and im trying to figure out why the bios has no parameter memory.
Why do you think a BIOS update would turn the memory settings in the BIOS?
Please don t mix of desktop computers laptops! Laptops cannot be overclocked.
BIOS of laptop computers is not the same thing as a desktop PC BIOS!
> I also noticed that with this computer laptop fan never seems to come, is there a way to turn the fan to the top? Whenever I have the laptop for more than 30 minutes, it becomes very hot.
Have you noticed all automatically turn off downs or any other strange behaviors laptop as freezing OS for example?
If it is then that the laptop runs correctly and doesn't overheat.
Books to support thermal protection which would be closed the laptop automatically to avoid equipment damage
Then lean back man and enjoy your nice toy ;)
PS: you are fan of Carlos Santana? ;) I ask through your nickname ;)
I have a Satellite Pro L300 (PSLBHE).
I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
What is the problem? What can I do? Please help me.
It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
What can you do now?
Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.
Hi, I'm using Toshiba Satellite Pro A300 with Windows Vista Home Premium.
Downloaded and run the BIOS update. The installer said that everything was OK with the BIOS flashing.
But when the computer reboots, TEMPRO asking again the BIOS update.
I don't know if the BIOS has been or has not been updated.
How can I handle this:
Samuel a. Mello
If you are running the Toshiba HWSetup you can see what version of BIOS you have.
On the Toshiba site, you can check if you have the latest BIOS:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
On this page you can also find a new version TEMPRO.
I have a satellite pro m30 and I would like to make a bios update. Utility hardware Toshiba says that my bios version is 1.4. The existing updates see 1.2, 1.6, but it says nothing about 1.4.
Should I take 1.6?
It might be possible that the BIOS version 1.4 is the version of BIOS default manufacturer for this model.
In my opinion you should take the 1.6 version because it is the most recent and it may be necessary!
Here is the link: http://eu.computers.toshiba-europe.com
go to Support & Download - Download BIOS - choose your M30 SP and click for the Description of BIOS for more information!
Anyone know if I can upgrade the BIOS of my Satellite Pro u300 from a floppy boot BACK, or another way to do an update without Windows? The downloaded utility seems to work only in Windows, I do not use.
I tried to launch a live Windows CD (BartPE and Ultimate boot CD) but it does not start or shows no graphics.
I have problems with some hardware and hopes that an update of the BIOS.
No, you can not day BACK because Toshiba driver BIOS European page provides only the version of the BIOS win.
For an update of the BIOS BACK you would need an update of the special BIOS that is not published on the page and is available for Toshiba technicians!
Try to update one of my employees with bios 1.50 laptops (C660) and it displays an error message displaying 3 possible causes. Power adapter not connected not (it's) battery is less than 10% (it is not) and the BIOS is updated to the version 1.50. When I tried the update the laptop was running 1.00. So I updated the bios to 1.30 with no problems, but when you try to update to 1.50 it still shows the error.
Any ideas? You will need to get the bios installed as seems to solve problems hitting the phone suffers from.
What operating system is currently installed?
BIOS update it of necessary this value-added package is installed and you run the update as an administrator. Also, make sure that the battery is fully charged.
What is the model number of the C660?
My last update of the BIOS has failed and my laptop PSU45E PrU400 Satellite is now out of use.
I want to use the recovery disk of crisis with a USB floppy drive, but I don't know the key combination to run the boot block.
Is that someone can help me?
I was wondering what crisis recovery disk you have? :|
In my experience the special drive is required, which is available only for ASP technician
That's why it of necessary to contact the ASP in your country to reflash BIOS.
In my opinion you shouldn't t try recovery disks of the crisis who loves you in the net, it can drive to the mobo damage
I need for my his laptop and drivers for the Modem.
Thanks for the help
Edit: I come from Germany, sorry for my bad English. :)
I presume you bought Satellite P100 and no Satellite Pro P100. Am I wrong?
In any case, if your P100 laptop is Vista preinstalled laptop, you may have problem because right now all new laptops Vista are not taken WXP supported. Of course, it will take a little time to have drivers of Windows XP Home edition.
I have a problem that I think has been there since I upgraded my Satellite Pro P100-327 XP to vista Business.
At the start, I have more no Visual on the screen until I see the windows logo. Computer works fine otherwise.
Now a year and a half later I want to load Windows 7 and I can't see the bios screen. F12, F2 or esc. do not help me even if the computer does not stall but I do not see on the screen. I have the latest version of the bios and the nvidia drivers as far as I know.
The only thing that I did not understand everything is the 'value added package' I think it's the small "HW" program, I downloaded the latest version and clicked on load HW in the control panel. Windows has asked if I wanted to go forward and I saw nothing else after that.
thaks a lot if anyone can help
For me, this looks like a problem of monitor settings but I don't know m.
You are using an external monitor or have you changed the monitoring (from simple to double mode) mode?
In your case, I could connect an external monitor and see what happens. Have you noticed the same problem on external monitor?
In the worst case, there is something wrong with the internal display, but this should be verified by a technician of the laptop.
My laptop is a Satellite PRO P100-383 with a DVD burner MAT * a UJ-850 s.
The current firmware of my DVD writer UJ-850 s MAST * one is 1.10 and I can't write some DVD-R, because they are not recognized as DVD-R, but as a CD - R. I think it's just the firmware of DVD writer that is too old.
Is it possible to update this with new firmware please? because I found something in the download section for my laptop. Just drivers and BIOS of motherboard, but nothing on the MAT * an update of firmware UJ-850 s.
Thank you very much for your answer.
In my opinion you shouldn't change something but use high quality blank DVD - R TDK or Verbatim.
Maybe you use some blank media cheap and without name.
Have you tested with known brands?
I have just flashed the BIOS on my Satellite Pro P100 4.8.
The CPU runs at 100%. (90% + for windows explore)
Only a single core is recognized by my Vista gadget.
85 CPU temperature
How can I "downgrade" the BIOS? Where are the older versions?
When the new BIOS version is available to download older versions are not available more.
What Satellite Pro P100 you exactly (model name, model number)?
Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.
What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400
http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421
Gives memory crucial me this module - is that correct?
Found, via the Kingstons site - is this okay?
Would be really grateful for official clarification here.
Thank you very much
It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.
In any case I recommend to buy products of high quality like Kingston modules.
Maybe you are looking for
the sidebar is twice as wide as necessary and I can only do broader, not narrowed down to about 30-35 mm. helps refine please
Greetings, my processor (i7 2630QM) does not work at full speed, it seems to be limited to 1.4 GHz. I tried downgrading Bios 2.10 downto 1.10 and back, loading the bios default and OC software settings but nothing worked, I still can not get more tha
I have a HP priter, product name is HP PSC 1610; I lost the installation CD after I formatted my computer, it is possible to get the program on your website?
I'm not good with my problem of spam in my Inbox skymail
Hola a todos nuevo, para continue con el ejercicio as I am doing, I need sacar una Señal than esta dentro el fuera UN, adjuto hay bucle an example of algo parecido as deseo hacer. El LED as esta fuera del bucle debe tener siempre el mismo than than e