Satellite Pro P100 GPU Fan off or full speed after updating the Bios to 4.20

Similar Questions

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Re: Satellite C55-A-1JL - the fan spins at high speed after updating BIOS

  Hello

  I've upgraded the BIOS of 1.20 to 1.40 and my computer started to automatically restart after a few minutes. the fan continues to run at high speed all the time

  Someone knows why?

  Question: the laptop work properly not to mention that the fan is rotating fast?

  Generally after updating the BIOS you must always load the BIOS default settings.
  In the BIOS, press F9 (load by default), and then press F10 to save the changes.

  Try it

• Satellite Pro P100 - GPU and CPU temperature question

  Hello

  I took my Satellite Pro P100 totally out, clean the radiator and vents.
  Also applied new thermal paste.

  The GPU is idling around 50 ° C fan always on
  The CPU is idling around 40-45 ° C fan always on

  To my other Qosmio G30 with a Geforce Go 7600, I got Idle at 35-38 ° C and about the same CPU!

  Then, normal time for the satellite pro or are there settings that I could use to reduce times?
  BIOS is the last of Toshiba, toshiba driver and win 7 power managemnt powersaving...

  Kind regards

  > The GPU is idling around 50 ° C fan always on
  > The CPU is idling around 40-45 ° C fan always on

  I put t think its too high in my opinion the temperature seems ok.

• Satellite P100: After updating the BIOS 3.8 I can't access MCE pressing enter

  Hello!

  I was able to enter XP MCE by pressing the Enter key when the Welcome screen. Now I cannot and must click on the photo of the small image. Is it because of 3.8 BIOS that I put in place recently or not? Can I do this option still works? Thank you very much.

  Hello

  I put t know if you can restore this option but you should access the BIOS and try to define again the default settings t.
  Don t forget to save the settings if you exit BIOS ;)

  But I really don't understand why you have updated the BIOS. If the laptop is running without any problems a BIOS update is not necessary!
  Therefore, never change a system up and running, you know? ;)

  Besides as I know the P100 were not delivered with Microsoft XP MCE but with XP Home and Express Media Player or Vista

• Satellite A210 - 16G (PSAELE) - how to use 4 GB and update the BIOS?

  Hello! I hope someone can answer a few questions for me.

  First of all is: How can I turn on my laptop to use all the 4 GB of RAM? OS is Win Vista Ultimate 32-bit with Service Pack 2. Now Vista all show the 4 GB of RAM, but don't use it. I activated the EAP in Vista, but still nothing. As I saw, I need to turn it on too memory remapping in BIOS but there is no option (my BIOS is ver.1.70).

  The second question relates to the BIOS. Because my version is 1.70 and there are more recent version 2.00; I get benefits if I update to BIOS? Someone has updated to version 2.00? And there are more options in the BIOS after update to version 2.00 (for example the memory remapping or a similar option)?
  I'm a little afraid to update BIOS, because sometimes my Toshiba freezes, and I would not hang during the update of the BIOS.

  And the final question is there any changelog to the BIOS? So I can see what is added and changed, and what's new in the new version of the BIOS. Because I could not find anywhere.

  Thanks for the responses to come.

  Hello!

  (1) you can use the entire 4 GB of RAM on a 32 bit OS. It is a due limitation of 32-bit technology. Windows Vista with Service Pack 2 may recognize the full 4 GB of RAM but not use it, more than 3.2 g.
  Here you can find more information about this limitation:
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  (2) about BIOS updated I can tell only must be made only if you have problems with the laptop. A BIOS update should never be done just for fun, because it of still a little risky. In the worst case, you can destroy the ROM module or complete motherboard.
  Update the BIOS doesn't normally contain new features or options. It s bug just setting. In addition it can t solve the problem with 4 GB of RAM and Vista 32 bit if you think that ;)
  If your laptop does not have 100% stable you shouldn't t update because it s too risky. Before the update, you should try to solve the problem of gel.

  (3) If a change log is available you can find it on the Toshiba site. If you can t find, there isn t available.
  That s all about this.

  I hope I could help a bit.

  Good bye

• Satellite Pro P100-465: fans make noise

  Hello

  I have a P100-465 running XP Pro top. I've had the laptop about 6 months now and the only thing I noticed about this laptop is that it's SO noisy. When you use the laptop, the fans come on and goes off constantly... even if I'm not hungry for resources. is this normal? I understand that the machine is powerful, but I can't believe that this is normal.

  I use to have a P25-S670 and fans use to come every now and then to keep the freshness of the machine, but this new laptop is INCREDIBLY annoying. As I type this the fans turn on and off every few seconds. Looks like fans RPM increases significantly, but only for a second or two, then it goes down. In the BIOS, I even put the option for silent mode instead of the performance mode, but this made no difference. I'm running the latest drivers and firmware.

  Can someone help please it makes me NUTS! ;-) Is there a way to control the fan speed and noise Windows? I remember my P25 I could change the power in silent mode options and it made quite a big difference.

  Hi mate,

  already cleaned your cooling system? Maybe this could be the point because these small ventilation systems are likely to be clobbed by the dust after a while of running.
  One idea would be to give your machine a technician and ask him to clean your machine and put a new grease cooling on the CPU.

  That should help prevent your machine from overheating or excess of fan noise.

  See you soon

• Satellite Pro 6100 - after updating the BIOS, it does not

  Hello

  I am trying to upgrade my old of Satellite Pro 6100.

  I started to upgrade the Bios via download from Toshiba (using WIN) site - OK downloaded zip files and installed, machine then stops. Problem, it does not restart - it's so now I have a laptop 'death' that is not responding to any key I tried.

  Any suggestions of resuscitation?

  Already I've updated from XP to SP2.

  Thank you

  Paul

  Hello

  It sounds like that the BIOS update has failed and your laptop can start t again. But try this workaround:
  Remove the AC adapter and the battery and then wait an hour. After that reconnect the adapter AC/DC and battery. Try to start the laptop.

  If it doesn t work I think that the motherboard needs to be replaced or you go to an authorized service provider. Technicians can reflash the ROM module
  But maybe you can find a motherboard of second hand cheap on eBay

  Good bye

• Tecra A7 after updating the Bios is recognized as Satellite M110

  Hello everyone.

  I'm new to this forum, and of course, I need your help.
  after update bios in my tecra a7 202 'Toshiba PC Diagnostic' shows:
  Model name: Satellite M110
  Number: PSBM0U-1234567
  SERIAL NUMBER: 000000000000000000000000000000
  Lower than that, everything is ok.

  I used bios5.10 for both parties. but when I tried to update software panda antivir only has not allowed me to open the winrar exe file.
  There was the vbs script that was dangerous in reviews of panda. I turned off Panda, but it still blocked the exe file. I decided to open the exe with winrar.
  After that, I run SA10Flash.exe. I saved the old bios and loaded a new - but there were 2 ROM files: S10PM510. ROM and S10GM510.ROM. first was younger and I decided to choose it. Maybe it was fake.

  Anyway after update in mode Bios was error with CRT or something like that and choose the option: F2 for configuration and default settings F1 charge. I took F1.
  After that, I have Satellite m110 :(

  Help, please
  Best regards
  Mirek

  Hello

  Sorry, but I don t you understand the procedure.
  Have you read the BIOS update document provided by Toshiba?
  The update of the BIOS is risky If you use a bad BIOS or bad update procedure!

  I checked out the site Toshiba driver and downloaded the BIOS for Tecra A7.
  I unzipped the 510win bios and I found the S10V510.exe file
  It is a file. You need to run!

  To me, it seems you used bad BIOS or bad procedure and therefore the cell displays a false name.

  PS: Don't worry ;) Satellite M110 is also a large notebook: D... just a joke

• Satellite C660D - after updating the BIOS, WiFi no longer works

  Hello
  I have to post my message again, my old account was deleted because it bore the name of Toshiba inside.

  Here's my problem:

  I have a Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have an ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -I turned down my anti-virus and firewall
  -J' tried a system restore on the eve of the update of the bios, but it did not because of a virus while it was off.

  The wi - fi card is always displayed in the Panel of the unit, and it is said in the work.
  The wi - fi network works on another computer or smartphone, so the problem comes from this computer.

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2

  (PS: Sorry if I don't speak very well, I'm not English.)

  Have you created a thread beginning here:?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67170
  If so follow the first thread to avoid some misunderstandings

• Satellite L300 does ' t run after updating the BIOS of V2.10 to V2.20

  Hello

  I just installed BIOS V2.20 on Bios V2.10 for my Satellite L300 Toshi on Windows XP.
  Afterwerwards the Machine starts and displays just the XP from window and restart I save the options normal reboot or restatr.

  Nothing works anymore? Even from Windows CD has no effect.
  Who can help?

  Hello

  Go into the BIOS (press F2 by turning on the device) and set the BIOS to default settings.
  Save the changes and try to start the laptop again.

• Black screen after updating the BIOS on the Satellite A200 - 12 X

  Hi people, I have a Satellite A200 - 12 X and get me some problems when I try to install the latest version of the bios.
  Today, I see the new driver bios here in the drivers of toshiba, the version of the 08/07/07.
  I have download and start installing, in the middle of the border as usual in windows vista gives me problems, and I complete the configuration of the bios.
  Restart the notbook and give them a black screen and nothing else.
  I take out the power cable and try turn turn it on if advance again once and nothing, turn on the power tube and read the dvd, but don't go to windows or other place, just a screen backl.
  Can someone tell me what is taking place and how I can fix the situation please.

  Hello

  It seems during the BIOS update process, something went wrong and therefore the laptop does not start correctly.
  You should know that the update of the BIOS is always a risky job.

  Unfortunately, you will not be able to solve this problem. You need a help of an ASP.

  As the above user said, contact the service provider allowed in your country and ask for help!

  Good luck

• Satellite Pro P100: Can which digital cable I use to connect the stereo

  I just bought a new P100 and think generally that it's great.

  However, if I plug it into my stereo via the headphone to the front of the computer, then it is very noisy. I read somewhere in the manual that this Jack is used also in digital form - weird! Is there a way to transform digital or I'd be better connection on my external (stereo only) DAC. If this option is ideal so what cable should I - nothing about this in the manual or on the Tosh site. I use a stereo plug for cable twin phono right now.

  Any advice from someone who has connected to their own hifi would be appreciated.

  Bill Mac

  Hello

  The headphone jack offers the possibility to S/PDIF which allows to connect the laptop to the hifi on digital channel.
  You need a simple cable S\PDIF. This cable you can get from each computer/laptop.

  Simply visit this dealer and ask for this kind of cable

  By the way: try to disable the option of its virtual when the laptop is connected to the stereo

• Satellite A-C50-K9K - after updating the BIOS, cooling fan is very loud

  Gas station proposed to update the BIOS. 1.00 to 1.30. After updating the cooling system is 90% of the time. Load the default settings BIOS do not change.

  No backup of the BIOS. Is it possible to download BIOS 1.00 or solve this problem?

  The downgrade of the BIOS is not possible because you n t have the first version of BIOS and even if you get the 1.0 version of BIOS, the BIOS update procedure is not possible because the newer version is already flashed.

  But I recommend you set the method in Windows to optimize power or better management the cooling battery life

  + Control Panel--> Power Options--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method.

• Re: Satellite A200 LEFP6 is slow after updating the BIOS

  Hello

  I have a problem with my Toshiba.

  2 days ago, I installed a new driver BIOS on the computer. Since then, a laptop computer is running much more slow then normal. I don't know what to do?
  I want to get the previous Bios driver but I don't know how to do it and I don't wont to do the biggest problem that I have now.

  I chose good driver for my 'machine', Vista 32-bit (http://support.toshiba-tro.de/tools/eula/info_eng2.asp).
  Can you help me???

  I also have one more problem. My cd/dvd drive does not read the cd drive.
  Is it possible that the problem is Vista? Because a few months ago, I had a similar problem with cd/dvd player. This day someone we the internet forum advice change me something in (I'm not sure) a registry file.

  It is a good solution because the disappearance of the problem and everything was working properly until this month.

  Thanks for any help,
  So I hope you understand my English :)
  Nice day
  Tomek

  Hello

  Currently, the European driver Toshiba page provides a Vista 32 bit version of BIOS 2.50.
  Don't forget that your BIOS has been updated to 2.50. You can check in the BIOS settings.

  In addition, I also recommend setting the default BIOS.
  This can be done in the BIOS itself.

  But generally it s not easy t say why your laptop is slower. To be honest I don t understand what you mean by running a lot more slow then normal
  The laptop starts more slowly? Or what's a problem exactly?

  So now a few tips about you, CD/DVD drives issue;
  Yes, sometimes the windows sets some filter values in the registry and this may affect the functionality of CD/DVD drive.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37430&TSTART=0

  There you can find the solution.
  And here is the link to the useful program that removes these registry values
  [CD / DVD missing in "My computer" (Windows Explorer) Player: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=4457 82xml]

  Welcome them