Satellite Pro P100: How to recover BONES after replacing HARD drive
Hello
I bought a satellite Pro P100, and I want to change my hard drive
I have the CD restored, but I think that this will not work with a new hard drive!
What can I do to recover my windows?
Sorry for my englich!
Thank you
Hey Phillipe,
Your recovery CD works on what hard drive install you in your laptop. Are the only factors affecting the hard disk of your choice: -.
1. compatibility of the BIOS (should not be a problem with the P100 model)
This model mainly old laptop impact where the BIOS could not recognize larger drives.
2 form factor
You should make sure that the disc you choose has the same physical dimensions as your
existing drive.
3 speed
Disks hard more quickly improve access times so check out 5400 and 7200 RPM. (there may be a problem
with the generation of heat so 5400 RPM is probably better than 7200)
The are no problem with Windows licenses as the license applies to the operating system itself and not on the hard disk on which it is installed.
Kind regards
Tags: Toshiba
Similar Questions
-
Satellite L300. How to restore Vista after replacing HARD drive?
This hard drive died a week after I bought the laptop just for a month ago.
Then, I favour toshiba wrote and said that it be fixed in the rehabilitation of specific local store.
Then store made me a new hard drive, so the files have disappeared.There is not any operating system is installed there, and I was not even trying to create a before recovery disk.
To restore the system to the L300, it must use its recovery disc, as soon as I hear?
The original system is vista. When I tried to insert a xp disc, it showed error after all the loading "stop: 0x0000007b...". »
Could someone tell me how to handle?
Thank you very much!> There is not any operating system is installed there, and I was not even trying to create a before recovery disk.
Bad, bad. Buddy. Generally, you need to create the recovery to the first disk using the laptop.
T did not read the user manual? Didn't you see the reminder?
It s always recommended to create the recovery disk!> I've heard to restore the system to the L300, it must use its recovery disk, right?
Yes, you are right. In order to restore the Vista, you must use the recovery disc!> The original system is vista. When I tried to insert a xp disc, it showed error after all the loading "stop: 0x0000007b...". "Could someone tell me how to handle?
I think that it does not work because of controller SATA HDD.
Either you'll assign compatible SATA mode (in BIOS)
Or you must include the Windows XP SATA drivers.Check the HowTo of this forum area to get some details how to integrate the SATA (AHCI drivers) in Win XP.
-
Satellite P105 S6158 - how to recover the password for HARD drive?
I forgot my massword HARD drive and I can't reboot my system.
How can I recover my HDD password in my laptop [P105 S6158 | http://www.laptop-power-battery.com/laptop-power-supply/toshiba-Satellite-P105-S6158-laptop-batteries.html]
?Thank you
> I forgot my HARD drive password and I can't reboot my system.
Check out bad news.Unknown HARD disk password cannot be removed or deleted.
In this case, the HARD drive is blocked and is no longer usableI think you can abandon this HARD drive and you can buy a new :(
-
Re: Satellite L350-16U - how to recover the password for HARD drive?
I forgot my massword HARD drive and I can't reboot my system.
How can I recover my password HARD drive in my notebook L350-16U?Thank you
Hello!
The HARD drive password can be removed from no one. Sorry this isn't a joke, it's done.
The only way is to swap the HARD drive, but your data is lost.
Good bye
-
Satellite A50 - message from system disk insert after replacing HARD drive
Hello
I have an old A50 and the HARD drive comes with it's very slow and cracking now, so I'm trying to replace it with a new HDD - Hitachi travelstar 7200 RPM of 60 GB, with ATA interface.
I took the old HDD and put the new, then on A50 and press F12, and then insert the CD recovery and restored (installation) everything on the new HARD drive. Once it's done, I rebooted A50, but what I got is then a black screen with the message "Insert system disk..." Does anyone know what I did wrong? I got tired of it several times, but I got the same results...
Thank you.
I think that Akuma is right.
On FAT32 and Windows 98 should define the active partition, and then it should work.
Then download a MS-DOS boot disk and burn it to a CD as Akuma has suggested. I tried it and it works :)
It is quite easy with Nero.Good luck!
-
Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive
I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
So, how can I put the o/s back on?Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
But I've never tried this procedure and don t know if it will work.But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities. -
Satellite Pro 4280 - what is the size of the HARD drive?
I just bought a laptop Toshiba Satellite Pro 4280. According to the manual, it should have a 6.0 GB HDD but in my computer it is shown as having only a 1.34 GB capacity.
PS I formatted the disk to remove the former owner data and operating system and you have installed Windows 98SE
[Edited by: admin]
Hello
Satellite Pro 428Xcdt was certainly delivered with 6 GB HARD drive.
Are you sure that you have checked the size of the HARD drive correctly?I guess the 1.34 GB is a free space on the HARD disk.
-
Satellite 1410 714 extremely slow after replacing HARD drive
Hello
I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.
I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.
Thanks for help.
Hannu
Hello
I can t think the motherboard is broken after replacing HARD drive.
I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
Please check site driver Toshiba for the latest version of BIOS.Have you used any anties Virus applications?
-
HP Pavilion 17: mouse pad does not work after replacing hard drive
Hello
After replacing hard drive and installing windows 8.1, I can't use my mouse pad.
I installed the Synaptics driver but it didn't help.
How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?
USB mouse works fine.
See you soon
The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.
-
Original title: dvd player
recently replaced HDD and reintegrated windows 7. Now my dvd player cannot play a bluray disc. Any ideas how to solve this problem?
Duplicate the content of the thread:
After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc
My hard drive recently broken and we replaced and reinstalled windows7. Now I'm watching a Bluray DVD and the drive will not read it. I tried the fix auto and that said they detected a problem but can not fix this. Any ideas?
Hello
You can check these links and try...
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
-
Satellite Pro P100 - screen and sound problems after upgrade to Windows 7
Hi all
I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:
-L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)
-No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)Thank you all
Hello
1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!
2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)
-
Satellite Pro P100 (PSPA4A-005002) - no sound after installing Win7
I've updated my laptop Satellite Pro P100 from Windows XP to Windows 7. I ran the custom installation of Windows 7 while I did not any problem of Windows XP system and I used a separate hard drive. This way I can reinstall the hard drive with XP and go back and use XP if I am not satisfied with Windows 7. Among the problems I encounter is that I can't ge the noise at work.
The speaker in the lower right corner icon has a red x on it. In Device Manager, the high definition Audio Device a "this device cannot start. (Code 10) "in the State of the device. The driver installation of guard is the version "Microsoft 6.1.7600.16385 version dated from 13/07/2009" driver. I tried to install the driver (Vista) recommended in the page Web of Toshiba "Upgrade your Toshiba PC to Windows 7". This driver has not worked. Windows also displays the error message "Driver Installation rating: could not find the media for this driver device.»
I searched the web high and low and all the recommendation I found does not work.
If someone has encountered this problem and have you found a solution?
Hello
Maybe you used the wrong audio driver. The 10 error always appears if an incorrect or incompatible driver was used.
I recommend the audio driver again.As far as I know the laptop supports a Conexant audio chip.
There are some models of different laptops that support the same sound chip.See the European driver of Toshiba page and choose for example the Satellite P300
This assumption of the model driver audio Conexant and I recommend that you install this driver!Welcome them
-
Satellite Pro P100 - how to enable Intel virtualization technology
Hi all
I have a Satellite Pro P100 P/N PSPA4E-00X00HEN, which I just installed Windows 7 RC.
I desperately need to run Virtual PC 2007 (other versions do not work) on this subject, but he wants that Hardware-Assisted Virtualization allows in the BIOS (Phoenix Technologies V4.70).
I've just updated to the latest version of the BIOS, but it didn't ease for SIAS in it.
I checked the specifications of the processor and there is no installation of Intel virtualization technology.From what I've read on the internet, even if the processor is capable manufacturers on the computers/laptops, in the Toshiba case, program the BIOS to their liking which will turn on or off certain functions.
What I want to know is, it will be another update to enable virtualization or there at - it another way to do it.
Thanks in advance.
Hello
To my knowledge, the use of Virtual PC 2007 does not require a virtual technology supported by the hardware (CPU).
I have used Virtual PC and Virtual Machine on PC without the ability to VT.But you're right. Intel CORE2 DUO T7400(2.16GHZ) processor supports VT
http://Ark.Intel.com/CPU.aspx?GroupID=27256Unfortunately my knowledge the P100 BIOS does not support the option to enable/disable VT.
-
Satellite Pro L40 - how to recover the system?
Hello world
My wife has a virus on his laptop computer. I think that it is the antivirus 2010. I can't access all the programs, and the recovery disk reads or that the virus has stopped working also the cd player. How can I re format the hard drive?
Thanks in advance
Rab
Hi rab75,
How have you used the Toshiba Recovery disk?
I doubt that the virus has stopped working CD player. Maybe in Windows but if you use the Toshiba Recovery disk you will need to boot from the disc.So I put the disk in the CD/DVD drive and boot from this drive. Some files are loaded and you get the recovery disk screen where you can start this procedure. You must follow the instructions on the screen and a few clicks are needed to complete the installation of recovery. :)
Check it!
-
Satellite U840 - how do I reinstall Win 7 after replacing HARD drive
I had a HARD drive error.
So I formatted the hard drive (after trying for months to get the process to finally finish that)
Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.I searched the net and found nothing of use!
Help, pleasesee you soon
NickHello
You need to create the own recovery in the past disc!
This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.In case you have not created this disk, it is possible to order this support:
http://backupmedia.Toshiba.EU/landing.aspx
Maybe you are looking for
-
Two part question about multicam sync and placement
Hello. I am a newbie to FCP, and I have a few questions. 1. I have two camera angles and I was wondering if I can sync the audio manually (to exactly match the Visual part), because the automatic method using FCP is an a little off. 2. question 2 -
-
I recently bought this laptop that I got it for 3 weeks that the charger gets hot exstremley until it's so hot that you can't keep it burning the hands also the battery life it is barely 3 hours
-
INVALID_PARAMETER when PIN message sending
Hello. I am trying to send a PIN message to a user via c#. Here is my code: UserMessage message = new UserMessage(); message. Subject = messageSubject; message. Body = messageBody; DispatcherMessageTypeEnum messageType = new DispatcherMessageTypeEnu
-
Hello... I need to establish a connection with an FTP server to my app and download a specific file. I m new FTP in blackberry.how and which class to use?
-
How can I delete a partition and extend the other partition space?
I have four partitions on my Windows 7 computer. And now, I find that the partition partition F has about 45 GB of free space. But the D partition is almost full and gives always notice the disk space is low. So, is that I can delete this partition F