Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

Similar Questions

• Satellite L50 - A - 1 6 - DVD problems after upgrade to Windows 10

  As the title, the player is normally recognized by the system, but put any media in the drive is not read and that is why it is always empty.
  What could be the problem?

  Thanks to you all

  I guess saying DVD player you mean the STRANGE-> optical disc
  First I would recommend you to check this page for troubleshooting MS:
  https://support.Microsoft.com/en-us/...drive_problems

  It fixes the problems with CD or DVD players that cannot read or write media

  In addition you can uninstall/remove optical drive from Device Manager.
  After the new reboot, Windows system must be able to recognize the STRANGE new and usually the most recent driver must be installed also.

• Satellite Pro P100: How to recover BONES after replacing HARD drive

  Hello

  I bought a satellite Pro P100, and I want to change my hard drive
  I have the CD restored, but I think that this will not work with a new hard drive!
  What can I do to recover my windows?

  Sorry for my englich!

  Thank you

  Hey Phillipe,

  Your recovery CD works on what hard drive install you in your laptop. Are the only factors affecting the hard disk of your choice: -.

  1. compatibility of the BIOS (should not be a problem with the P100 model)
  This model mainly old laptop impact where the BIOS could not recognize larger drives.

  2 form factor
  You should make sure that the disc you choose has the same physical dimensions as your
  existing drive.

  3 speed
  Disks hard more quickly improve access times so check out 5400 and 7200 RPM. (there may be a problem
  with the generation of heat so 5400 RPM is probably better than 7200)

  The are no problem with Windows licenses as the license applies to the operating system itself and not on the hard disk on which it is installed.

  Kind regards

• Satellite Pro P100 - GPU and CPU temperature question

  Hello

  I took my Satellite Pro P100 totally out, clean the radiator and vents.
  Also applied new thermal paste.

  The GPU is idling around 50 ° C fan always on
  The CPU is idling around 40-45 ° C fan always on

  To my other Qosmio G30 with a Geforce Go 7600, I got Idle at 35-38 ° C and about the same CPU!

  Then, normal time for the satellite pro or are there settings that I could use to reduce times?
  BIOS is the last of Toshiba, toshiba driver and win 7 power managemnt powersaving...

  Kind regards

  > The GPU is idling around 50 ° C fan always on
  > The CPU is idling around 40-45 ° C fan always on

  I put t think its too high in my opinion the temperature seems ok.

• Satellite Pro A120 (PSAC0E) does not start after upgrading RAM

  Hello

  I hope someone can help me here, I recently bought a Satellite Pro A120 (PSAC0E) and decided to upgrade the RAM. I bought a stick of 512 MB of curries with the following specifications: DDR PC2700 200-pin 333 Mhz SODIMM (64 x 64).

  However, the first problem I encountered was an alignment problem. A little effort and handling solved this, but after you insert the RAM into the available slot, the computer laptop wouldn't boot, and instead, I had the flashing sequence on the LED from 2,3,3.

  I was told it might be a problem matching, then tried to remove the original RAM and booting with just the new stick, still the same error. I tried it in the slots and still no joy. It starts very well with the original 256 MB of RAM, but refuses to take the new RAM.

  Are there any known issues? Can anyone suggest something that I can do wrong? I followed the usual steps of upgrade to remove all power cables and the battery before the upgrade, but still no joy.

  Hoping that someone is able to help!

  Hi James

  You simply have bad memory modules and is not a compatible uses.

  > the first problem I encountered was an alignment problem. A little effort and handling solved this,

  This should not happen! The right modules can be inserted without any problem of alignment!
  Handling can damage the module!

  In my opinion, you should use another and supported the RAM module.

  To my knowledge, you can use the PA3512U-1M1G (DDR2-667 1 GB Memory Kit) or (PA3411U-2M1G) DDR2-533 1 GB
  The two should be compatible.

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• Satellite U 300 - battery and sound problems

  Hi, I was wondering if anyone has had similar problems as me:
  My laptop is only two years, but last year his work only intermittently. I get messages saying that the driver is not installed, until one day he will decide that the driver is installed after all and works very well. Until the next time it stops working. There seems no rhyme or reason for it. I gave up trying to reinstall the driver, because I know that (possibly) the sound will come back without intervention from myself.

  My second problem may be connected - I have problems every now and then close the laptop. I try to put in mode 'sleep', but is not complete the process, and the blue light comes on. When I then open the cover, very often, the screen stays black and I have to turn off the machine and turn it on again the force again.

  Then recently, I noticed a sharp drop in the battery life (less than an hour). He also annoyingly started losing all power and cut until the indicator showed all the usual warnings of low power.

  Anyone know if these problems can be linked, and whether they can be fixed? A new battery will fix it? To be honest, he arrived at a point where I think to buy another laptop do since they are really starting to get frustrating!

  Thank you very much

  Gooday,

  I also own a U300 I bought about 2 years ago now, I had no problem with the sound but didn't have any other problems with my 1-2 months battery life after life - 20-30 min. I just baught a new battery and it is promising, I just did the first load and it lasted long, however the windows said it had 0% remaining, but I pulled out another 30-45 minutes the dough until it went flat. If you look in your event log do you get the message

  ": The embedded controller (EC) has failed in the specified time-out." This may indicate that there is an error in the EC hardware or firmware or BIOS is accessing the EC incorrectly. You should check with the manufacturer of your computer for an updated BIOS. In some cases, this error may cause the computer to function properly. »

  It is listed under ACPI in the event log.

  see you soon

  Lee.

• Satellite Pro U400 starts and overheating problems

  Hello

  6 weeks ago, I bought a Satellite Pro U400. Shortly after that I bought, I noticed that the computer overheating. After 1 hour of use, it becomes very hot in the touchpad area, as well in the base of the computer and on the touchpad itself. It is very annoying because I almost burn my fingers with the touch pad.

  The problems began 10 days ago. I had been using the laptop for an hour when it suddenly turned off without notice. Power outage? I don't know Don t. I looked like a sytem of overheating protection. My previous laptop had the same problem. After a few minutes, I was able to turn it back on.

  Then it happened again a few days ago, but it took me 5 minutes to turn on. Yesterday, it happened again, and after 45 minutes without response, I went to bed. In the morning, I was able to turn it on.

  This also happens when wifi is disabled, it is not only a problem with the wifi card, overheating of the system.

  Am I the only one having this problem? I will try to send it back to Toshiba for a replacement or a refund.

  Is this normal in a really new machine?

  Thank you

  First, the warming of the touchpad is normal for almost every laptop, due to construction. Under this, there are the HARD drive and it produces heat. With my last books, and it was not bad, too.
  But really to get so hot?

  Due to the protection against overheating, it is normal that you cannot turn on your laptop immediately.
  But the wireless card is not the device in question, because it's a very small piece of hardware and produce little heat.

  You said, you had this problem with your notebook previous too. Let me ask you, when you use your notebooks? What your table surface there or is there no matter what on that table cloth?

  What I can tell you right now is, to check your locations of fantilation for all dust or maybe you have objects near it so that hot air can not cool.

  Post edited by: InvaderZim

• Satellite L755-M1M3 driver sound problem after upgrade to win 10

  Salvation;
  I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

  Inability of Toshiba to make the solution, always shocks me. !!! ???

• Re: Satellite Pro P100 of hard drive problem.

  Hello

  Uh, to sum up my problem, a vital file... or two, has been deleted by a rather malicious Trojan horse, I had a week or two it y a. I had cleaned it the command registry and such and everything was fine. Until I tried a disc to my hard drive... The unit seems to recognize that there is a disc in there and I checked because nothing "seems to" be physically wrong with it. He won't read it. So my question, is there a link to download or something or another or not, that could lead me to a place where I could safely re - download the drive of files for the Pro P100.

  And yah... I have no experience of the computer, or similar, so I just ask a pretty silly question. xD

  Hello

  If the problem is Windows related, you should be able start from the CD or DVD without any problem. So I recommend this audit with the recovery disk or other bootable disk.

  If you can't start t with him, the drive is may be defective or the lens needs to be cleaned with a Microfiber cloth.

  Good luck!

• Satellite Pro P100 - screen is blank

  Computer seems to be on, but the laptop screen remains empty.

  OK so for the moment, the power light is on and HD and the rear fan is not on and when I press the power button, the HD and the rear fan turns on and then the power light just flashes but nothing is on the screen and the lights (capslock/numlock etc.) keyboard flash not as they would on a start upward. Which leads to presume that the laptop is in hibernation or something, but it should come out of hibernation (if that were the case) on a press on the power button, but nothing happens when I do that.

  also connected an external monitor to the back of the laptop, nothing on the screen as well.

  any ideas?

  Hello

  HM, it could be a problem of motherboard or something else. I doubt that it s an inside problem appears because tested an external display and here you can see the same problem.

  What you can do is the following workaround: remove the battery and the AC adapter and wait an hour. Reconnect the adapter AC/DC and battery. Now, you can try to restart the laptop.

  If it doesn t work I would ask for a portable computer technician of an authorized service provider. Maybe it s a hardware malfunction and the ASP can test your laptop.

  Good bye

• Satellite L40t-b917 - sleep problem after upgrade to Windows 10

  Name: satellite product L40t-b917

  Operating system: Windows 10 (64-bit)

  Hello

  If I have problems with the mode 'sleep' after that I upgraded to Windows 10. When I try to resume my laptop from sleep mode, Toshiba screen seems then the unit turns off.

  After 2 hours of searching on the internet I found that a solution said that my drivers are too old. So I tried to download but my drivers resembles not yet supported.

  Any solution to this problem?

  Where can I download updates for my device?

  Thank you.

  Hello

  Go to control panel and uninstall the Touchpad, display, wireless and sound drivers/utilities.

  Restart, and then run Windows Update to install the updated Windows 10 compatible drivers.

  Make sure that the BIOS is also the latest version.

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• Satellite L855 - 12N - keyboard problem after upgrade to Windows 10

  Greetings friends,
  the problem goes like this: I have a TOSHIBA satellite, L855-12N, Series notebook.

  After updrading to win 10, some of my keys (a, n, enter) did not work initially.
  If I wait for awhile, they start work later.
  I find that I continue to press a button, (for example the button "a") for a long time, I see that he started to answer, then stop again and then answer - stop, until finally it works OK.
  I tried to update the drivers, uninstall and then reinstall, but it doesn't seem to work.
  Anyone know what's going on, or have any suggestions?
  Thank you.

  You are 100% it's a matter of Windows 10?
  Looks more like a hardware problem, keyboard should replace.

  Go into the BIOS and test the keyboard in there.
  If it goes into the BIOS and then replace the keyboard.

  If it's a software problem, try uninstalling the driver for the touchpad Control Panel, then reinstall it via Windows Update.