Satellite Pro P300 - Fn + f5 combination does not change the monitor

On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.

If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)

Thank you, best regards,.

Davy

Hello

In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.

In my opinion, you should clean the registry first.
Use CCleaner. It s free and cleans up the registry.
In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
Finally, install the Toshiba drivers from the Toshiba page
More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for...

Tags: Toshiba

Similar Questions

  • Satellite Pro P300 - output HDMI port does not

    Hi all

    Well it starts to drive me to distraction and Im hoping that theres someone who can put me out of my missery lol.

    I tried to connect my laptop (toshiba satellite pro p300) up to my LCD TV via the same HDMI cable that I use for my PS3 but the connector does not simply. I keep finding all these messages in various forums saying how they can't get the HDMI connection... that would be great, at least, this means that they were connected.

    Are there different links for the HDMI? The one I have is diagonal connector but the port on the laptop is more square and just doesn't fit. So, if it is not a connector, does that mean I have a funky port on the laptop.

    There is also the issue of connecting my laptop to my amp which controls the surround sound system. Which link is best to use, as there is no real connections audio output?

    See you soon

    Hello

    Can you please tell us what Satellite Pro P300 you have exactly? I mean the exact model number.
    Maybe you can also post a picture of the HDMI port. Normally there is no different HDMI port, all have the same physical size.
    I m PS3 not owner, but maybe he has a special connector. Have you tried another cable?

    Regarding the audio connection I use the normal line of output port to my external speakers. Have you tested this?

  • Satellite Pro L300 - USB card reader does not support the 64 GB

    HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

    Posted by Trees
    HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

    Hi, here is a link to not detected by the PC card reader:
    http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
    You can take a look, hope it will be useful to you.

  • Satellite Pro P300 PSPCDE - internal microphone does not work

    Win7 Professional 64 bit German

    Helllo Forum,
    The problem seems simple but its delicate. The internal microfone is not working.
    I cannot find any topic in the deivce Manager.

    Is there perhaps a way to activate the Mikro as FN + X?
    "I've tried the standards such as ' Start +" Mikro ", right click on the speaker icon...

    Is there someone who had solved the same problem?

    IAM running low on ideas...

    Thank you

    How did you test the internal mic?

    Usually, the internal mic belongs to the internal webcam. So have you tested this in relation to the internal webcam?
    Pre-installed webcam software allows you to create movies and pictures. The film can be recorded with the sound and the internal MIC is used for this

    In addition the internal microphone should appear in Control Panel-> sound-> recording tab
    If it s not visible, then you must right-click and must check the options; Show hidden devices, see the disabled devices. You could activate the internal microphone and this could make as default device.

  • Satellite Pro L300: DVD drive eject does not & recognizes not all disks

    Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

    Please help someone,

    Thank you very much.

    What kind of help do you expect?

    You mean he s a software problem?

    I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

    The laptop seems to be is not very old, and I think that the guarantee must be valid
    How about you, communicating with ASP in your country and ask for a replacement WEIRD?

    I think this helps

  • Why Muse does not change the names of certain images or property when exporting to HTML format?

    Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?

    General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).

    The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.

    If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).

  • Why an amplification of the RAM does not change the index performnance of windows vista?

    Why an amplification of the RAM does not change the index performnance of windows Vista?

    Hello

    I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
    Usually the 32 bit OS is capable to manage and send only 3.2 GB.
    The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
    In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
    But this is only my personal hypothesis.

    Welcome them

  • Insert a new CD does not change the last torn CD

    WMP 11 XP SP3 does not change the info of CD in the RIP, a new CD of screening.   WMP 11 found no new updates when updates has been requested.  If I close WMP 11 and reopen WMP11 new info of the CD are correct.  It must be a problem of buffer information.

    If you start XP in clean boot mode, the same problem occurs there?

    In addition, please check if the problem occurs on other users accounts, by creating a new user account in the Control Panel, by logging into that account and trying it.

    Tim Baets
    http://www.BM-productions.TK

  • DMZ-Link bandwidth does not change the routing table countin traffic

    Hey guys

    I'm INE laboratories dong and shoved a weird one that delivers.

    I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.

    Here is my configuration:

    Rack1R6 (config) #do sh run | dry BGP

    router bgp 100

    no synchronization

    The log-neighbor BGP-changes

    BGP dmzlink-bw

    155.1.146.0 netmask 255.255.255.0

    aggregate-address 155.1.0.0 255.255.0.0 summary only

    neighbour 54.1.1.254 distance-54

    neighbor 54.1.1.254 dmzlink-bw

    neighbour 155.1.67.7 distance-300

    neighbour 155.1.146.1 distance-100

    155.1.146.1 neighbor send-community times

    No Auto-resume

    Rack1R6 (config) #.

    Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    Version of BGP table is 35, local router ID is 150.1.6.6

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 54.1.1.254 0 54 I

    * > 28.119.17.0/24 54.1.1.254 0 54 I

    * > 112.0.0.0 54.1.1.254 0 0 54 50 60 I

    * > 113.0.0.0 54.1.1.254 0 0 54 50 60 I

    * > 114.0.0.0 54.1.1.254 0 0 54 I

    * > 115.0.0.0 54.1.1.254 0 0 54 I

    * > 116.0.0.0 54.1.1.254 0 0 54 I

    * > 117.0.0.0 54.1.1.254 0 0 54 I

    * > 118.0.0.0 54.1.1.254 0 0 54 I

    * > 119.0.0.0 54.1.1.254 0 0 54 I

    r > 155.1.0.0 0.0.0.0 32768 I

    Rack1R6 (config) #do sh ip bgp

    Version of BGP table is 35, local router ID is 150.1.6.6

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * i28.119.16.0/24 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254                             0 54 i

    * i28.119.17.0/24 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254                             0 54 i

    * i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I

    * > 0 0 54 50 60 54.1.1.254 I

    * i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I

    * > 0 0 54 50 60 54.1.1.254 I

    * i114.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i115.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i116.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i117.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i118.0.0.0 204.12.1.254 0 100 0 54 I

    Network Next Hop path metrics LocPrf weight

    *>                  54.1.1.254               0             0 54 i

    * i119.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    r i155.1.0.0 155.1.146.4 0 100 0 I

    r>                  0.0.0.0                            32768 i

    s > 155.1.146.0/24 0.0.0.0 32768 0 I

    * > i205.90.31.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    * > i220.20.3.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    * > i222.22.2.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    Rack1R6 (config) #.

    # now R4 configuration

    Rack1R4 (config) #do sh run | dry BGP

    router bgp 100

    no synchronization

    The log-neighbor BGP-changes

    BGP dmzlink-bw

    155.1.146.0 netmask 255.255.255.0

    aggregate-address 155.1.0.0 255.255.0.0 summary only

    neighbour 155.1.45.5 distance-200

    155.1.45.5 route-neighbour card GAME-54 on

    neighbour 155.1.146.1 distance-100

    155.1.146.1 neighbor send-community times

    neighbour 204.12.1.254 distance-54

    neighbor 204.12.1.254 dmzlink-bw

    No Auto-resume

    Rack1R4 (config) #.

    Rack1R4 (config) #do sh ip bgp Synt.

    Local router BGP 150.1.4.4 identifier UNDER number 100

    BGP table version is 18, table 18 main routing version

    15 entries for network using 1980 bytes of memory

    18 entries for path using 936 bytes of memory

    9/7 BGP path/bestpath attribute entered using 1512 bytes of memory

    3 entries for BGP AS-path ACCESS using 72 bytes of memory

    1 entries PMO community, using 24 bytes of memory

    0 cache entries of BGP route-map with 0 bytes of memory

    0 cache entries of filter-list BGP using 0 bytes of memory

    Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory

    BGP using 4620 total number of bytes of memory

    Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds

    Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd

    155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3

    155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3

    204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10

    Rack1R4 (config) #do sh ip bgp

    BGP table version is 18, local router ID is 150.1.4.4

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 204.12.1.254 0 0 54 I

    * > 28.119.17.0/24 204.12.1.254 0 0 54 I

    * > 112.0.0.0 204.12.1.254 0 54 50 60 I

    * > 113.0.0.0 204.12.1.254 0 54 50 60 I

    * > 114.0.0.0 204.12.1.254 0 54 I

    * > 115.0.0.0 204.12.1.254 0 54 I

    * > 116.0.0.0 204.12.1.254 0 54 I

    * > 117.0.0.0 204.12.1.254 0 54 I

    * > 118.0.0.0 204.12.1.254 0 54 I

    * > 119.0.0.0 204.12.1.254 0 54 I

    * > 155.1.0.0 0.0.0.0 32768 I

    s > 155.1.146.0/24 0.0.0.0 32768 0 I

    * i205.90.31.0 155.1.13.3 0 100 0 200 254?

    *>                  155.1.45.5                             0 200 254 ?

    * i220.20.3.0 155.1.13.3 0 100 0 200 254?

    *>                  155.1.45.5                             0 200 254 ?

    * i222.22.2.0 155.1.13.3 0 100 0 200 254?

    Network Next Hop path metrics LocPrf weight

    *>                  155.1.45.5                             0 200 254 ?

    Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    BGP table version is 18, local router ID is 150.1.4.4

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 204.12.1.254 0 0 54 I

    * > 28.119.17.0/24 204.12.1.254 0 0 54 I

    * > 112.0.0.0 204.12.1.254 0 54 50 60 I

    * > 113.0.0.0 204.12.1.254 0 54 50 60 I

    * > 114.0.0.0 204.12.1.254 0 54 I

    * > 115.0.0.0 204.12.1.254 0 54 I

    * > 116.0.0.0 204.12.1.254 0 54 I

    * > 117.0.0.0 204.12.1.254 0 54 I

    * > 118.0.0.0 204.12.1.254 0 54 I

    * > 119.0.0.0 204.12.1.254 0 54 I

    * > 155.1.0.0 0.0.0.0 32768 I

    * > 205.90.31.0 155.1.45.5 0 200 254?

    * > 220.20.3.0 155.1.45.5 0 200 254?

    * > 222.22.2.0 155.1.45.5 0 200 254?

    Total number of prefixes 14

    Rack1R4 (config) #.

    # and where is the real problem, R1

    Rack1R1(config-Router) #do sh ip bgp

    Version of BGP table is 15, local router ID is 150.1.1.1

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * i28.119.16.0/24 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i28.119.17.0/24 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I

    * > I 204.12.1.254 0 100 0 54 50 60 I

    * i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I

    * > I 204.12.1.254 0 100 0 54 50 60 I

    * i114.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i115.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i116.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i117.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i118.0.0.0 54.1.1.254 0 100 0 54 I

    Network Next Hop path metrics LocPrf weight

    * > I 204.12.1.254 0 100 0 54 I

    * i119.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i155.1.0.0 155.1.146.6 0 100 0 I

    * > I 155.1.146.4 0 100 0 I

    * > 205.90.31.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    * > 220.20.3.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    * > 222.22.2.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0

    112.0.0.0/8, version 4 BGP routing table entry

    Paths: (2 available, best #2, table by default-IP-Routing-Table)

    MPIO: eBGP iBGP

    Announced for the update-groups:

    1          2

    54 50 60, (from a customer-RR)

    54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)

    Origin, IGP, 0, 100, valid, internal multipath localpref metric.

    DMZ-Link Bw 250 KB

    54 50 60, (from a customer-RR)

    204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)

    Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best

    DMZ-Link Bw 12500 KB

    Rack1R1(config-Router) #do sh ip route 112.0.0.0

    Routing for 112.0.0.0/8 entry

    Known through 'bgp 100', 200, 0 distance metric

    54, internal type tag

    Last update of 204.12.1.254 ago 00:15:30

    Routing descriptor blocks:

    204.12.1.254, 155.1.146.4, there is 00:15:30

    Path metric is 0, number of shares of traffic 1

    AS hop 3

    Beacon road 54

    * 54.1.1.254, 155.1.146.6, there is 00:15:30

    Path metric is 0, number of shares of traffic 1

    AS hop 3

    Beacon road 54

    Rack1R1 (config - Router) #.

    as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...

    can you please help me if I makeover anything in my setup?

    Hello

    Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.

  • getPreferredHeight does not change the height of a LabelField.

    Hello

    I add LabelFields at a screen. I replaced getPreferredWidth and the LabelField getPreferredHeight. GetPreferredHeight however does not change the height of LabelField.

    getPreferredWidth seems to work very well.

    I do not use the default vertical Manager that comes with the screen.

    Ideas/pointers in troubleshooting this would be greatly appreciated.

    -MO.

    Hello

    to change dimensions on a field, you must override the method of layout.

    protected final void layout(final int width, final int height) {
        int yourHeight = super.getFont() * 2;
        super.setExtent(width, yourHeight);
    }
    

    If you want the label is centered vertically, you must override the paint method.

  • Computer does not recognize the monitor after update of Win7.

    Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

    It is a laptop?

    And if you start in safe mode?

    Desktop

    Haven't tried safe mode
    Disconnected the projector, and then restarted; back to work now!
  • After the upgrade to 6, security server does not change the listening Port

    Came across a weird situation where after upgrading a server security 6.1.0 - 2509221, it does not change the listening SSL port during the upgrade, it was not on the standard SSL port.

    It was initially configured to listen on 444 before the upgrade, after the upgrade, I tried to go back to 443 and a netstat-ban shows that it is listening on port 444.

    I double checked the config.properties file and there is no entry for serverPort, and configuration shows 443 in the admin View handler.

    -Re-apply the configuration via the web page does no change, always tuned to 444.

    -Don't restart the service of security server no change, still plays on 444.

    -Restart of the server, no change, still plays on 444.

    -Statically placed serverPort = 443 in the config.properties, always tuned to 444.

    All ports are verified open, 443, 444 and so I think I could have hit a bug. Someone else has security servers that listen on non-standard ports SSL?

    A complete reinstallation of the Security server is provided, changing the port to listen 443, shouldn't have to do that well.

    You checked config.properties, but did you check in locked.properties for the port setting see if it's been moved there before and during the upgrade? Locked.Properties replaces all the configuration settings.

  • Does not change the language when I change my preference-applications-Applanguage on creative cloud. No way to get around?

    Does not change the language when I change my preference-applications-Applanguage on creative cloud. No way to get around?
    It is important to Swedish to English in the case.


    Thank you!

    Please, try the following steps:

  • Importing APEX app with PL/SQL does not change the id as requested app

    Oracle DB XE 11 GR 1 material

    APEX 4.2.2

    RHEL 6.3

    ------------------

    The following code segment any an APEX application which has been exported successfully.  However, even when given a 'new' id of the application, the 'old' within the export application id is still used.

    What could be wrong? In other words, how can I make sure that the 'new' id of the application is used and it overrides the 'old' id of the application that comes with the APEX app export file?

    declare...

    wwv_flow_api.set_security_group_id (p_security_group_id = > v_secgrp_id);
    apex_application_install.set_application_id (t_new_app);  # does not change the new app app ID id
    ....

    exception
    while others
    .....
    end;
    /

    @APEX_export.sql;

    commit;

    Thank you.

    It turns out that the code above (6) works very well.  My development environment has a problem with the workspace is not found.  Tried the code in a test environment and it worked.

    Thank you.

  • Access policy does not change the status of resource

    I have a set access policy to assign a role and a resource to anyone in a specific group. The policy work very well for those who have never had the resource before. For people who were in a disabled state resource - access policy is to add the role, but it does not change the State of the resource from disabled to enabled (or put into service).

    How can I do so it adds not only the role, but he changes the State of the handicapped resource? Thanks in advance.

    Simple!

    -Create an adapter of the entity during the prior insertion of the Members Group.Group of the user who will be called on the user being part of the group. Add custom java code that will check the resource assigned to this user and confirm if its there and in a disabled state. If its disabled and then turn it back on, otherwise just hang on and do nothing.

    Thank you

    Sunny

Maybe you are looking for

  • This morning I upgraded FF 6.0 and want my old version back. How can I get that back?

    I would like to uninstall the updated browser that I downloaded this morning (6.0 FF). I see no difference with the last version I had others that I can't use Google redesigned, which is my favorite add-on. I would like to than my old version of FF b

  • How can I enter a Genre for an album?

    I want to enter a Genre for a particular album. I'm used to be able to do it on iTunes easily on older versions. Any suggestions? Thank you.

  • Compaq Presario CQ60-270EG: Reset forgotten bios password for presario CQ60-270EG

    After 3 unsuccessful attempts get the good BIOS password after power on, I got the code displayed 66699347. Please give me the code to reset the biospassword. Kind regards

  • T5 'P' Setting

    I'm still learning and read a book that explains the "P" (program Mode) automatically sets. So my question is what is the difference between this and the "auto" mode (a + scene Intelligent Auto mode)?

  • How to remove GoList?

    Hello. Probably, I'm just a bit blind but how can I remove the GoList all at once (not not by deleting all tracks to its own) after that I filled with music?I'm sure it can't be too difficult, but I tried the player together for this option without s