Satellite Pro P300 (PSPC5E) - driver Webcam open fail on Windows 7

Similar Questions

• Satellite L300 and WXP - driver Webcam open fail

  Hello

  I just bought a Toshiba Satellite L300 with no OS installed. I managed to install windows XP and all the sounds/videos... drivers successfully, but after installing the driver for the webcam appears an error that says: Webcam driver open fail. Please restart camera or computer.

  I rebooted the computer several times, but it still does not work. Please help me.

  Hi, I'm having a similar problem (see previous thread), you can actually see the webcam in Device Manager? There is also a known issue if it's just the driver, do a search on this forum, it seems to be a common problem.

  Kind regards

  Jason

• Satellite A300-20 a - driver webcam open fail

  I try to try to solve my problem

  Error: failed to open driver webcam

  http://img442.imageshack.us/img442/5706/hsd36352.jpg

  Hello

  You must use the Toshiba Forum search option.
  Then you will find a large number of discussions on the topic.

  In most of the threads, you will find the recommendation to reinstall the webcam software.
  I think this should help you.
  Then, visit the Toshiba driver page and download the software of webcam for laptop model. Before install you the new software, I recommend you to remove the old installation.

• Driver webcam open fail on Satellite A300-1MC

  Whenever I try to start my integrated webcam (Chicony Camera Assistant Software) the message "driver Webcam open fail." Please restart camera or computer. "is displayed on the computer.
  First of all, I do not understand what it means and then I rebooted both the camera and the computer, as well as repair the camera software.

  I looked for updates and drivers, etc., but nothing works. I also read every manual available in search of an answer, but I can t seem to find something that is of no help.
  I was wondering if someone had an answer for me, or tell me what I need to do.

  Hello

  I had the same problem a few weeks ago and I could solve the problem by updating the driver for the webcam on the Toshiba site.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  So, download the latest version, delete the old and reboot the laptop. Then install the new version.

  I doubt that you were looking for updates for the Toshiba shows a driver for webcam.

• Driver webcam open fail on Satellite A305-S6872

  My problem is the following

  I have a laptop A305-S6872 Satellite with a built-in webcam, I had to restore it with the cd provided with the laptop and I reinstalled the assistant webcam software and thought it was but it keeps saying "driver open webcam fail. Please restart camera or computer.

  Does anyone know how to fix this

  Hi mate

  This message might appear because of some problems of compatibility between the software of the webcam and the 3rd party software such as Skype, Live messenger, etc.

  In your case I recommend you remove the software for the webcam of the Setup again.
  Then clean the OS using CCLeaner.
  After that, you could reinstall the webcam software and must clear the webcam software in msconfig--> startup.

  This prevents the software from loading automatically.

• Satellite A300-1EG - driver Webcam open fail after Exchange of motherboard

  All greetings.

  Recently took the laptop with the service center, it changed the motherboard. Before the service center the camera worked fine, but after taking early displays an error "Webcam driver open fail." Restart the computer or the camera. "Read the posts on this topic wise anywhere to update the BIOS, I renewed, but nothing helped.

  This could be due to the fact that in the service Centre to have forgotten something to connect to the motherboard? Because in Device Manager do not see a web camera. I have a Toshiba Satellite A300 1EG PSAG4E number.

  Thanks in advance for the answer. I would like to hasten to meet to go tomorrow to the center of service or not.

  Hi kuhar2007,

  Maybe the authorized service provider forgot to plug in the power cord, but before to contact them again once you try to reinstall the driver for the webcam. You can get the latest version here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally the webcam should be in Device Manager after that. If this isn't the case, you must contact the ASP again. Explain the problem and they will try to help you. ;)

• Satellite A300 PSAGCA - 02Y010 - error: driver Webcam open failed

  Problem:
  Receive error whenever I try to use the camera for Toshiba support software: Webcam driver open failed. Restart the computer or the camera. Webcam does not work in Skype. It seems that it is a very common problem with the A300s series, but there is no clear solution there.

  Material
  Series: A300
  Model: PSAGCA-02Y010

  Software
  Operating system: Windows 7 64 bit
  Camera Assistant Software for Toshiba: 1.7.175.0123

  Details
  I recently did a clean install of Windows 7, Windows Vista update. I've never used the web cam on Windows Vista, so I can't testify as to whether or not the web camera is workin properly. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam does not appear at all in Device Manager - even when the value for show hidden devices. Trying new material added through the control panel fails to detect the webcam at all. I rebooted after each installation/repair of the driver.

  Measures taken

  Reinstalled drivers saved
  I used the third-party software (Double Driver) to back up and reinstall the drivers for the webcam after I installed Windows 7. Double Driver claimed there was no device to install the driver. Manually, I copied the files in the folder using the camera and replaced existing ones. The files I copied were:
  casflr.cat
  oem34.inf
  Restore.ini
  UVCFTR_S.SYS

  Pilots relocated from site Web from Toshiba
  Vast Goolging turned only recommendations to uninstall and reinstall the drivers. I was unable to find the drivers for windows 7 64 bit, but I tried for my laptop model for Windows Vista 64 - bit - no luck. I tried to install software camera for Toshiba support, as far as I know, including the driver - it gives me the error described above.

  I also tried to find a universal Windows 7 driver for the webcam - I was unable to find one.

  Check the registry value is Correct
  I tried also checked the registry value to HKEY_LOCAL_MACHINE/System/ControlSet001/Enum/USB/SN001/ClassUID corresponds to the value in C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\64bit\casflr.inf as and C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\32bit\casflr.inf recommended by some article is recommended.

  Please, I would really appreciate it if someone could help me out here. I've exhausted all the options I can think.

  Probable solution:
  I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager. However, I still can't make it work with Camera Assistant Software or Skype.

  Post edited by: A300Owner

  > The web cam does not appear at all in Device Manager - even when the value for show hidden devices.
  > I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager.

  Does this mean that webcam does not appear in Device Manager if the cover is open right?
  In this case, it seems that there is no link between the webcam and the motherboard.
  As far as I know as the internal cam is connected to the controller card USB mother s and possibly there is a bad connection.

  Possible solution: I think that the technician needs to disassemble the laptop to check the connection :(

• "driver webcam open fail." on Satellite A305-S6844

  The full text of this error is "Webcam driver open fail. Please restart camera or computer. »

  I spent a lot of time looking for online solutions. Many of the solutions proposed seem to be reasonable fixes for my problem, but they do not work. I downloaded the latest patches for Vista (64-bit) and I have the newest driver of the webcam. There are some strange circumstances related to my particular problem I've not seen mentioned elsewhere.

  The webcam doesn't work out of the box.

  On two occasions, inexplicable, the driver for the webcam was found by the wizard new hardware and installed. These two were held after that the computer had sat for a while. The webcam has become functional. On reboot, the error message returned.

  I can't find the camera in the Device Manager. In fact, I find not all imaging devices either. Others who have had similar problems could apparently see something in this category, often an unknown device.

  I downloaded a program called "Driver Detective" and he ran. Surprisingly, he was able to find the driver for the "webcam Chicony USB 2.0". The program argued that the pilot was perfectly aware. He registered the camera under the category 'USB device unplugged', in the same category as my ipod.

  If I need to provide any other information, I can quickly do.

  Thanks for the research!

  Have you tired uninstallation and reinstallation of the camera in Device Manager? To do this, and then restart your computer, it will automatically detect and reinstall the drivers for the camera.

  I suspect that your camera may be at fault but you mentioned previously it installs sometimes while you use the computer. If uninstalling and reinstalling do not work, you may need to take it to a repair centre.

• Driver webcam open failed on the Satellite a series

  Whenever I start my computer it says "open driver Webcam failed, please restart your computer or camera.

  Can anyone help me solve this problem or I have to buy a new camera?

  Please let me know as soon as possible

  Thank you
  ajoshi

  Hello

  What operating system do you use? Vista? What model of laptop is it?
  If Yes please install the SP1, because it contains a Microsoft patch that solves the problem of the webcam.
  I had a similar problem and the SP1 was the key.

  It is also recommended to remove the old driver/webcam software download a webcam driver from the European driver Toshiba page and reinstall.

  Check it out!

• Driver webcam open fail - Satellite A300 - 1 MM

  Hello

  I have laptop Toshiba A300 - 1 MM and my webcam is not working. There is no driver for Windows 7 32-bit on toshiba support site. Only for Vista 32 bit. I use this driver. Is there an another sollution?
  Thank you.

  Hello

  I was able to find the driver for the webcam for Win 32 bit for this series.
  Install the driver mentioned, reboot the laptop and test the cam once more.
  [Webcam driver v 1.7.260.0526 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 781 & selSho rtMod = null & language = 13 & selOS = all & selType = 315 & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = 315 & page = 1 & ID = 68798 & OSI D = 29 & driverLanguage = 42]

• Driver webcam open fails - reboot or computer camera

  I've upgraded Windows Vista by Windows 7 in my Toshiba Satellite L300 laptop. Drivers for webcam chicony installed automatically. The Device Manager shows webcam with the drivers installed and give message device works correctly. But when I start webcame message appears stating "driver Open Webcam fail. Please restart camera or computer. »

  What can I do for this?

  Unfortunately not much. Windows 7 is not yet on the market and not supported. Toshiba not offers tested drivers, tools and utilities for this OS.

  By the way: If the software cam Wizard is not started, can you use cam in Skype.
  I will test Windows 7 days and want to check the features of cam with Skype.

• Satellite Pro P300: Need driver "Mass storage controller" of Vista 64-bit

  Hi, please help.

  I just upgraded my laptop from Windows Vista 32 bit Vista 64-bit.

  I managed to find all the drivers apart: the driver "Mass storage controller" (yellow exclamation in Device Manager).

  I don't know where to look for this driver.

  Any help would be appreciated. Al

  Hello

  I guess you didn't search in the forum for similar issues? Is this good?
  I think that I m straight because I searched the forum and found that Toshiba FAQ doc.

  + No driver Windows XP for PCI Memory Controller +.
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  Here you can find this text passage:
  After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * "Mass storage controller" * in Device Manager.

  _Solution: _
  This unit is probably the module of Robson former Turbo Memory.
  This material will be supported only by Windows Vista.
  There is therefore no Windows XP driver.

  Now, everything should be clear ;)

• USB ports of my son and the webcam will not work. We get "driver webcam open fail." "Please restart camera or computer" and 19 code for USB

  In the Device Manager say USB controllers ' Windows cannot start this hardware because its information for configuration (in the registry) is incomplete or damaged (Code 19).»  We have already deleted the drivers and rebooted (did not work) and tried a restore from the registry, but there was nothing old enough to return to. Now what?

  Hello

  There could be a hardware problem that just happened to come while he was on the system.

  Disable Legacy Support just in case he has a problem - don't forget to put back so no joy. Look to see
  If there is another USB settings and check with system manufacturers.

  Maybe an upgrade InPlace or even a reinstall of Windows would be useful.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Don't forget to do a good backup, or three if you
  keep the data.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Several options below.

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite Pro P300 (PSPC5E-00L00CEN) - where is the S/PDIF connector?

  Vista tells me that laptop has one, and it is located on the front panel. He said also the headphone socket is on the front panel, and I see this one, but I can't find something that looks like a connector S/PDIF optical or digital.

  Can someone tell me where it is?

  I made a screenshot of your manual:

  http://img832.imageshack.us/img832/2727/SDIP.jpg

• Satellite Pro P300 - hot to get the WLAN driver in my device manager?

  I have a Toshiba Satellite Pro P300 with xp pro. My wlan driver atheros AR9281 does not work. I uninstalled it as suggested by Toshiba
  and downloaded a new. How can I get the download open and in Device Manager?

  Prior to do any create new folder on the desktop.
  Download driver driver and start TC00147200C.exe Toshiba will start extraction of archive
  Click on Options
  Click Browse, and then choose new folder on the desktop
  Click next
  Click Start
  When finished open the new folder and go to the folder XPDrv
  Start the installation with setup.exe and the installation should start

  Can you please confirm if it works?