Satellite Pro P500 - standby and Shut Down crashing

Similar Questions

• Satellite Pro A200: Internet access shuts down when idle

  Sounds similar to my wireless on a Sat Pro with Vista problem - I get a message on the icon saying related to limited availability and only no connection over wireless connection. Have tried to change the wireless router and it happens again - even tried it on my parents WLAN and goes as well. I think it is a matter of Toshiba personally as you do.

  How can I connect a call with Toshiba by the way? Microsoft said it was an OEM Toshiba software had to support it...

  Hey ROB

  You issue sounds like this problem described here in the article MS knowledge base

  http://support.Microsoft.com/kb/930517/en-us

  This problem occurs if a device on the Windows Vista-based computer uses a network bridge to access the network

• Satellite P20 - 504 shutting down / crashing during playback of Medieval: Total War

  Salvation;

  I run a game program, (Medieval: Total War) that sporadically stops or freezes / crashes my laptop. Sometimes it works OK and sometimes it crashes.

  I think it might be a graphic driver problem nVidia, even if I run other programs of game with higher spec requirements.

  Is there any where on the Toshiba site, I can actually download new drivers? I searched the Toshiba site and found that there is some possible updates but no installation to actually achieve the download itself... confusing.

  Any help is appreciated.

  Rob W.

  Hello

  Can you please check this topic.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2581&MessageID=8148#8148

  There is a nice discussion on shutting down / crashing when you play a game.

• Satellite Pro P200-14W and WXP - no driver for PC memory controller

  I installed Windows XP on the Satellite Pro P200-14W and installed all the drivers I could find on the Web of Toshiba site following the instructions provided.

  I always have a controller memory PC that appear in hardware Manager who is not driver related to it.

  My main problem however is that at random intervals (sometimes when you pull the power cable) the defects of the screen and turns into a mess of the desktop computer and the computer must be restarted because it does more. I tried several types of graphics drivers, but this does not stop the problem.

  Any ideas on how to solve this problem would be greatly appreciated.

  If you have installed XP on this laptop Vista you must also update the BIOS to the version of Windows XP.
  Seems that at this time it s a 5.00Win version of the BIOS.

  To get rid of the yellow exclamation mark in Device Manager, you must install the
  Flash Media Driver. This is the driver for your bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Good bye

• Satellite Pro L300 - 24L and VGA card update

  Hello world

  I just have a Satellite Pro L300 - 24L and want to update the VGA Intel 4500 M for a Nvidia Quadro 3D & CAD applications, possibly for the games now an then.
  Is this possible and what card can adapt to my L300 - 24L?

  I'm really a noob in laptop, so your advice will be welcome heart.
  Features: CPU T3400 - 4 GB 800 Mhz HARD drive - 250 GB - Vista Home Premium 64 bit

  Hello

  I want to say clearly that portable computers technology design is not the same as on the desktop and if you have a good experience with desktop computers, you'll know that upgrading the graphics cards is not so problematic, but on laptops, the situation is very different.

  Laptops design and construction doesn't allow such flexibility for upgrades, upgrading the graphics card is not possible.

• Satellite Pro M10 freeze and crash with some programs

  Hello

  I have a M10 Pro Satellite...
  A few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered to the authorized agent and they had not detected any problems.
  Already I have formatted several times, but the problem persists.

  Any idea what this may be?

  Thank you

  Hello

  For me it looks like you might have a motherboard problem. Formatting removes the chance that it is a software problem. Try taking 1 stick of RAM and test with it. If she continues to crash, remove that stick and try it. If she does it with the two RAM then those who are ok. HARD drive is not the culprit, so now he could either be processor or MB. Find a program to measure the heat from the laptop and run some heavy programs do overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a CPU or MB problem. I hope this helps.

• Windows 8 on Bootcamp. Kernel_security_check_failure regular on restarts and Shut Downs.

  MacBook Pro 13 retina

  8 GB RAM

  Bootcamp 5.0.5033

  Windows Fresh 8 upgrade from fresh Windows 7

  Hello

  I've been using Boot Camp for several months, running Windows 7 on my Mac. I need extend partition, so I decided to uninstall the Windows 7 partition (using Boot Camp on a Mac), then reinstall Windows 7 on a freshly prepared partition. Who had finished I immediately upgraded to Windows 8.

  I installed the Boot Camp of support software, and as far as I can tell all my drivers are up to date.

  However, every time I restart or shut down the computer, I get a BSOD with Kernel_security_check_failure. I tried to study it using WinDbg, but all this can point to what is NTKRNLMP.exe which shows that it is caused by something else, and it is not clear what.

  I tried to go through this process twice, so I'm on my second fresh install in Windows 8 now.

  There is no other problems at all on Mac or Windows, it is not never failed except when it restarts.

  I ran a memtest with no problems found.

  I have about this problem over the past months, I have been using Windows 7

  The only time I saw it crash not was when it was connected to an external monitor which leads me to believe it's a problem with the display driver. I tried all the drivers from the Boot Camp, Windows update software and update the Intel utility display and none of them solve the problem.

  Any help or this point troubleshooting tips would be MUCH appreciated and I would be interested to hear if someone has the same problems.

  Thank you!

  Chris

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Satellite Pro A10 display and DVD issues

  I have a Satellite Pro A10 about 2 1/2 years and have never had a problem with him, but the other day when I tried to watch a DVD, look at a program (InterActual Player) opened as usual and then a few more seconds later the display will change in very low resolution (something like 14 colors, almost a negative and all image was massive Although I don't remember the actual numbers) and he said that I had to reboot in order to return things to normal. I tried the same DVD in Windows Media Player, as well as to try other DVDs and initially that the DVD would play in Media Player but not Interactual but now the same thing happens any DVD or player that I use.

  Also, I went on the computer this morning and got a message saying that the battery is low (although it was because I had not plugged the computer again, nothing to do with the last errors) and the computer is in standby. I plugged in the computer and you press the power button to wake the screen is very dark but visibly pixelated (I think that's the word, he had visible points, as if someone were holding a magnifying glass up to her) and got very slowly brighter until there has been a series of narrow bright stripes, like a giant pixel or a tv test screen.
  This could be a problem with the display drivers (even though I tried to update and we found since I always see a message 'Cannot find the requested string' by the icon for display in the control panel), the screen itself, or something else entirely?

  Sorry it's so long, but I thought it is best to include all the details in case it has been important. I hope someone can help!

  Hello Nicola

  As you know on this path is not easy to say what may be the problem. In my opinion, it is important to see what is happening exactly. I assume that your problem is not caused by the display driver. Try to properly test and notice where the screen is very dark.

  If this problem is repeated again and again that I recommend you backup your data and reinstall the unit with recovery media. On this path of unity will be factory configured and you can see if the problem still occurs. If so, it may be just caused by a malfunction of the equipment.

  Good luck!

• Satellite Pro M10 overheating and the fan runs loud

  I have a Satellite Pro M10 and when it is the fan on the power grid comes shortly after the start and makes a horrible noise - this has only started happening recently. I tried spraying compressed air (dust) to the air outlet and still have the same problem.

  Other postings say to clean the fan, but I don't know how to access it. I'm worried about overheating problems I work in Africa much of the time and the laptop is subject to hot temperatures.

  Hi Hannah,

  The easy way to clear the dust and debris from the cooling system is to use a vacuum cleaner hose placed on the admission air grids that are usually in the bottom of the laptop (covered by a grid). For maximum effect, I usually place a rag around the pipe to maximize the flow of air through the fans.

  This causes air suction through the radiator CPU the wrong way and ensures that all debris are not pulled into the heatsink, but are removed by fans. You can see a ball of down under the grates that you need to try to clear little by little.

  This technique will not void your warranty since no disassembly of the unit is necessary.

  Kind regards

• Satellite Pro P100 - cable had burned down due to a faulty graphics card

  Hello
  I have a problem with my Satellite Pro P100 where to win t start, including trying to restart without the battery.

  I took it for repairers who managed to get it working again. They said a cable leading to the screen had to be replaced with requiring a General Service Officer, as it has been clogged up with dust.

  However once I got it home it works ok, but when I tried to access the options for Nvidia graphics display an error message came upward, which suggests that I have maybe need to install a driver of cassis, which I did immediately and restart the computer the problem has reappeared, computer wouldn't boot.
  I brought for repairs for the second time and they said the cable had burned down again because of a faulty graphics card and would cost a lot to replace.

  If someone has had this problem, it is possible to have just the graphics card replaced without replacing the motherboard and it is likely that the motherboard is too damaged.

  You will appreciate all the comments/tips

  Strange, but I think that there is no other way to replace the motherboard.
  The graphic card it s soldered on the motherboard if the entire motherboard must be exchanged.

  I know that's not good news for you buddy but if the graphics card is faulty, it should be replaced. :(

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Satellite Pro L100 PSLA4: ATI graphics card crashing in half-life 2, Team Fortress 2

  Hello

  I have a satellite Pro L100 (PSLA4) with ATI Radeon Xpress 200 M graphics card.

  During the game Team Fortress 2 and Half Life 2 Episode 2, the system breaks down frequently (screen goes black, then blue, then the computer automatically resets). After restart, Microsoft error reporting tells me that there is a problem with the card ATI display driver and recommend updating the driver.

  I note that Toshiba has not released a new driver to display this map since 2005, and attempts to update via the ATI Web site do not work.
  Is it possible to update the graphics driver or Toshiba has plans to release an update.
  Thank you

  Ian

  Hello

  I use the driver of the * www.omegadrivers.net * site.
  It works on my laptop.

  Download the right and compatible on then go to Device Manager and select the graphics card-> update

  Then select Install from a list or a specific location-> don't search. I will choose the driver to install.

  All that s!

• Satellite Pro U940 - How to get down to win 8 to Win 7 64 bit?

  In fact I want laptop e downgrate (Satellite Pro series U940) since Windows 8 for Windows 7.

  But, when I chose the hard drive to format and install the new OS (W7 64 bit) I read this message: "no driver signed device not found.".

  Guys, please help me... !!

  Please read this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=72365

• Satellite Pro L870-15F and missing compatibility Windows 10

  Hello

  I have a portable Satellite Pro L870-15E.

  I saw in a compatibility list, that I was sent via Tempra that my laptop is not compatible-10 victory.

  How is it that a laptop that isn't so old or so cheap does not have to be compatible with Windows 10?

  Concerning
  ARI

  How is it that a laptop that isn't so old or so cheap does not have to be compatible with Windows 10?

  I guess that in this forum from a user to anyone will be able to answer this question, but from my point of view of a few each notebook / computer manufacturer must decide which models would get additional software support...
  Toshiba released still many laptop models in a short period of time, and in my opinion that it is not easy to provide support for all series laptop... so somewhere it is necessary to make a clear cut...

  But you can still install Windows 10 laptop and I am sure that the system will work perfectly, but probably some portable devices is not available due to lack of software...

• Satellite Pro M70 overheats and turns off

  Need to support some tech with this problem.

  Satellite Pro M70 constant over heating problem. After use of 20-30 minutes of normal (web navigation etc.) the bottom of the laptop becomes really hot near the fan, unbearably hot to the touch.
  If I play games or do whatever it is cpu-intensive, it will end by the smell of the burning and power off.

  All this time the CPU fan never turns! Just lets him get more hotter and hotter. Strange thing, that's when you start first upward, the spins of CPU fan for about 5-6 seconds to make it work! Already tried to clean it, was not very dirty, the fan is not stuck, it runs if you blow...
  Update I tried to the latest version of the BIOS overheating again...
  Tried all the toshiba utils for cpu temp monitoring etc., they indicate the CPU get more hotter and hotter much more of 60 c +, but none of them (or other 3rd party utils) can detect the fan...!

  Fix for that or is it just bad fan / design of the temp sensor?

  > Already tried cleaning...
  Yes, but how did you do that?

  In the past, I have separated three Satellite M70 notebooks and was surprised inside, how much dust has been placed behind the cooling rack. After notebook professional cleaning was much quieter and has been properly cooled.
  Maybe the grease thermal CPU and graphic should be replaced also.
  After a long period of use, it seems quite dehydrated.