Satellite Pro PSA65E P60 - BIOS not revised since 2005?

Similar Questions

• Satellite Pro A30 with BIOS not fully ACPI compatible for VISTA

  I would use my beloved sitting Pro A30 to dual boot with Windows XP Home edition and Vista but having bought a 80 gig HARD drive and would divide in 2 partitions, I have now WXP SP2 running on the first partition, but try to install vista on the second I get the message: "BIOS IS NOT FULLY ACPI COMPLIANT".

  I ran the compatibility of vista online check and gave the OK and have the latest version of the bios v1.80. Do I have to buy a laptop?

  Yes. Your laptop is not supported in Vista. Sorry but there is no chance of having Vista BIOS support.

• Satellite Pro S300 EZ1514 - could not initialize Solid State Drive (SSD)

  I have a Satellite Pro S300 EZ1514.

  Recently I bought a SATA II 64 GB SSD to replace hard drive current cavalry. I first tried to install XP with SATA drivers rationalized in.
  The installation process recognized the SSD and has the original file copied to it, but when it restarted to continue the installation process the system wouldn't boot from the drive.

  Then I tried to install Vista Business 64 from the recovery disk came with the laptop.
  After launching the recovery disc, the said installation process the hard drive has not been initialized and click OK to initialize now.
  After clicking OK to initialize the system not restarted that at the end pointing upwards on the screen telling me to initialize the hard disk.

  Then I tried initializing the disk manually on my desk.
  Plugged into my office, initialized and formatted in NTFS. Plugged into the laptop to retry recovery Vista. And once again the same screen appears. Reconnect the disk SSD the Office to see that the player has is more initialized and was to be initialized again.

  Then I gave up and installed the SSD on my desktop under master boot and installed perfectly fine with XP. For testing purposes I then handed the ssd with XP pre-installed in the cell to see what happens. To my dismay the computer laptop would not boot and on top of that when I put the SSD drive in the desktop only to see that the drive has been initialized is no longer and I had to reinstall XP again.

  Conclusion:
  It seems that the Satellite Pro S300 series is not easy SSD and just post it self off Initialise the Solid State Drives.
  This seems to be the logical conclusion that the SSDS works perfectly well on my desktop and the laptop is fine now with the old turntable hard back in.

  Does anyone else have this problem or a solution?
  I would still put the SSD in my laptop to save energy.

  Hello

  The laptop is equipped with common serial ATA HDD.
  The SSD might work, but is not a must.

  There are several different SSD on the market and a problem of compatibility of equipment can always happen.
  Maybe an other SSD would work properly, but these are just suggestions.

• Satellite Pro A200-PSAE7E is not grateful USB Sennheiser Headset

  Can someone let me know why my toshiba Satellite Pro A200 - PSAE7E is not auto recognition USB Sennheiser headphones?

  What do you mean with grateful self their? As far I know Sennheiser those with USB connection built into the sound card, and therefore, you will need to install the drivers.

  Sennheisers as well, but with normal stereo jack and not the USB ones. You may edit the specific model name.
  And to check if your system is your helmet in any case, go to control panel - system - device manager and see if something changes, when you plug in your headphones.

• Satellite Pro A60 - HARD drive not detected by BIOS

  Hi all!
  I received a Pro (PSA65E) Satellite A60 for free... because it has a bug! But I want to fix it and use it.
  Problem is that the HARD drive is not recognized by the BIOS. Strange enough, it is possible to format during the initial phase of an installation of the OS from scratch (I tried with Win XP and Win 2000), but facilities do not proceed any further because it won't start HD. If I try to install a time shild, he can't find some data already present in the HD and gives warnongs... which means that it is also possible to write to the disk.
  The BIOS screen shows: no drive.
  CD-ROM drive is OK, shown as secondary.
  I also look in the forums to nothing does not.
  Actions taken so far:
  * flashed the BIOS, now at version 1.90
  * Replaced the original HD (Toshiba, 40 GB) known to be good, by another more small (Toshiba, 30 GB)
  * Tried to remove the drive CD and checked BIOS recognizes, it has been removed and recognized it even when delivered. The same manoeuvre with the HD does not change the BIOS screen: he says still 'no drive '.
  * Tried with the BACK of Partition Magic version: it says "no disk found. Same thing with the backup came with the PC disks.
  Tried other stuff found in Fora them: remove all the power sorce, let the PC for a few minutes... open and checked for visible problems in the area of the disc HARD and so on.
  Any suggestion would be appreciated!

  Thank you
  aurcri

  Have you used the default settings for the BIOS settings?

• Satellite Pro A300-1PW - BIOS flash not successfully

  Hello

  I've updated the BIOS most recent on the Web from Toshiba site and my laptop froze now give a bad BIOS flash.
  All I get now is a white screen and the hard drive light flashes is anyway out of a bad flash

  I have a Toshiba Satellite Pro A300-1PW system
  Model number psag9e

  Thank you
  ADE

  I'm afraid there is not much you can do about it. The BIOS chip is ruined.
  Contact the nearest Toshiba service as soon as possible. They can help you with this.

• Satellite Pro L20 keyboard problems not fixed by the update of the BIOS

  Hello

  When I type in MS Word or another application, certain characters are not displayed. This problem is known.
  I followed the recommendation of the TOSHIBA BIOS V1.30 for PSL25E update. Unfortunatey, it does not help.
  I would be gateful to any Advisor.

  Thank you
  olbur

  Hi Olbur

  I didn't find any official document on this subject, as you say, known issue. Can you please send a link?

  I have the Satellite L20 and there is not much difference for Satellite Pro L20 and I have no such problems, but I'm interesting about this. The L20 keyboard is not the best one, but all the characters are not displayed correctly. Maybe you type fast. ;)

• Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

  Hello

  When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

  My laptop Toshiba Satellite Pro U200 with Windows XP Prof

  Pleas help me

  PS. I Don t have a Toshiba Recovery disk

  The message is pretty clear!
  The common Module is not installed and therefore you can not update the BIOS.

  Visit pilot European Toshiba, download the common Modules for Win XP and install it.
  Then you should be able to update the BIOS.

  Concerning

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• Satellite Pro A210 - USB does not

  I have a new Satellite Pro A210 with downgrade to XP.
  I have a problem with the USB. When I plug a USB device, for example. camera or a flash drive I get the usual sound of a USB device is connected but no folder appears and the device does not appear in my computer, or disconnection of the usb device icon at the bottom right of your desktop. When I unplug the device I get the sound of the disconnection.

  The Toshiba PC diagnostic tool tests the USB also ok.

  It has been produced since I first got the computer.
  I've since updated to the latest version of the bios and use windows update to upgrade to service pack 3 and all other updates available, the problem is always the same.

  Any ideas?

  You have mapped network drives?

  Sometimes readers in network can hide removable drives such as USB keys.

  If you start while the USB is connected, it must assign a letter from reader properly.

• Satellite Pro 6100 Modem does not - No Dial Tone

  Hello

  I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

  HE DIDN'T THERE WAS NO DIAL TONE!

  I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

  I have a big rally Friday and will need this modem to work... any help would be much appreciated...

  Thank you

  Matt.

  Hello
  that doesn't sound so good!

  The measure where I read that your ad you´ve checked your system almost all.

  Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

  It is also ok, you should let check your laptop on a faulty Modem.

  Good bye

• Satellite Pro A100 - it does not recognize 4 GB of RAM

  Hello
  today I purchased two 2 GB RAM Corsair DIMMS (DDR2 - 667 mhz) for my Satellite Pro A100.

  After that I updated the BIOS it detected the 4 GB of RAM, but the balance of RAM on the boot prompt checks only 3 GB of RAM. So I can use only 3 GB of RAM (I use ubuntu 64 as an operating system). When I try to RAM into another laptop, it works perfectly. A memtest86 + says check: no error. When I plug in a dimm in the laptop, it is correctly detected as a 2 GB dimm module (tested two DIMMs into the two slots on motherboard)

  Anyone else seen this behavior? For me, it looks like a limitation or a bug in the version of the BIOS.

  (The processor supports 64-bit (core2duo t5500))

  concerning
  Kai

  Hello

  What Satellite Pro A100 you have exactly?
  As far as I know that some models can only be upgraded to 2 GB of RAM.

  It's really not easy to say what is the reason for this because I m confused on the subject of what the BIOS recognize the 4 GB of RAM, but not the boot prompt.
  I'm not sure that maybe the modules are not compatible with your laptop. You can test other modules?

  Welcome them

• Satellite Pro C660-29W: BIOS won't let me enter the supervisor password

  Computer is a satellite pro C660-29W-PSC1ME-00U00KEN

  I put a BIOS supervisor password (no user password is set). I know the password.

  If I hit F2 it penetrates into the text editor, but does not any possibility to enter the password, and while I can see there is no way to change anything.

  Any suggestions?

  If this can be useful?
  http://APS2.toshiba-tro.de/KB0/TSB0B032D0000R01.htm