Satellite Pro R50-B-12N OCZ Vertex 460 has UEFI Install

Hello world

I'm having a great problem with tent to install an SSD in one of our Toshiba laptops and allowing the UEFI. Here is a brief summary of the components involved:

OCZ Vertex 460 has SSD installed to replace the mechanical HARD drive. -SSD Firmware is up to date
Toshiba Satellite Pro Portable R50-B-12N - BIOS version is 1.40, CBS version is 1.20
Windows 7 Enterprise X 64 install
MDT 2013 1 update to deploy to
Starting to install Windows 7 with Lite Touch PXE deployment
Secure boot is disabled
UEFI enabled

When I try to install a Windows 7 image, the original MDT deployment process works correctly with no error message. The disc seems to be partitioned correctly for an EFI boot disk, and extracted the install.wim file on the windows partition. Unattend.Xml apply and restart the laptop.

Each reboot the laptop, however, an error message appears asking to install a system disk and press a key to continue. I don't know this error happening if a startup disk is not detected or the hard disk fails.

Interestingly, if I disable UEFI and start again the deployment process, this problem does not occur. The laptop restarts and continues the installation without problem when running in MSC mode.

Can someone answer the following for me queries please?

(1) if I run in MSC mode, I feel that UEFI is say-abled, so I don't get any of the benefits of the use of instead of the UEFI BIOS. Is this correct?

(2) Windows 7 is able to UEFI boot as long as Secure Boot is disabled. As it is a SATA drive, there is no drivers needed for this HARD drive to work (according to he site OCZ)-I do not think it is a driver error, as the operating system does not load.

(3) If you need more details regarding this flaw could list you for me to recover? I have to clean and reinstall the laptop each time in order for me to do now.

I'd appreciate any help with the above error. Currently, I think it's a fault with the application of portable computers UEFI boot but I would like a third opinion on this if possible?

Thank you for your time and help with this query.

Kind regards

Koryo

I've also posted the above in a separate proceeding for review, more details can be found here:

http://www.Edugeek.NET/forums/window...i-install.html

Tags: Toshiba

Similar Questions

  • Tecra Z50-A-180 does not start using the new SSD OCZ Vertex 460

    Hello

    I bought an SSD OCZ Vertex 460 for Tecra Z50-A-180 but the system only started only not with this device.

    BIOS detect SSD but not find any system start-up.

    I cloned the old SSD HARD drive, but the system does not boot with SSD.

    I installed the firmware 1.03 on OCZ.

    I await response.

    Thank you to

    What program did you use to clone?
    Maybe it's not compatible with the version of Windows.

    If you load a new copy of Windows or Ubuntu on the SSD can it start?

  • Screws missing or loose Satellite Pro R50 - B - 12 p

    I am the IT Manager for a number of primary schools in the United Kingdom.

    Schools have purchased a large number of Toshiba Satellite Pro R50 - B - 12 portable p 12/18 months from various suppliers. It has been brought to my attention that a large number of laptops lack screwsfrom the merits of the case.

    Because there are so many missing or loose I thoughthat one of these children might do. However, I started to see the same thing is happening in other schools with the cell phones of students and teachers as well s.

    I believe we have more than 50 laptops and all have at least a screwmissing, most have a lot more. I started to see laptops with more than 10 screwsmissing and the case began to unravel. As I see so much of this virtue, being due to a manufacturing problem.

    Is it possible that we can be provided with screws in number (100 +) Datacasting so those missing can be replaced.

    Concerning

    JohnD

    Posted by jdourish
    I am the IT Manager for a number of primary schools in the United Kingdom.

    Schools have purchased a large number of Toshiba Satellite Pro R50 - B - 12 portable p 12/18 months from various suppliers. It has been brought to my attention that a large number of laptops lack screwsfrom the merits of the case.

    Because there are so many missing or loose I thoughthat one of these children might do. However, I started to see the same thing is happening in other schools with the cell phones of students and teachers as well s.

    I believe we have more than 50 laptops and all have at least a screwmissing, most have a lot more. I started to see laptops with more than 10 screwsmissing and the case began to unravel. As I see so much of this virtue, being due to a manufacturing problem.

    Is it possible that we can be provided with screws in number (100 +) Datacasting so those missing can be replaced.

    Concerning

    JohnD

    Hello

    I am COMPUTER technician in a school and we had the same problem - our portable initials were C50-A-1MX models that were very good, but we have recently been making models R50-B-12W who lose all the screws from the bottom and are therefore originally business start to come out, I noticed. Is this a known issue for Toshiba and is there any screws of bugs/spare parts available?

    Kind regards

    Sam

  • Satellite Pro R50 - B - 10 K - SSD & Windows installation - missing pilot

    Hello

    I have a problem during the 8.1 windows x 64 installation pro. Just after the departure of Assistant installation, an error message appears: "no hard disk found. Click on load a driver to provide a driver for installing mass storage. »

    My configuration:
    Satellite Pro R50 - B - 10 K-online bios 1.4
    cricial SSD 120 GB => firmware ok
    8.1 Windows x 64 pro

    (Uefi) bios see the ssd (in gpt)

    For installation: uefi mode, disable secure boot.

    no visible ahci or sata in the bios configuration
    No startup as type ' [uefi] usb windows 8.1.

    -J' have tried to have the right drivers of toshiba and intel, nothing works.
    -So, I tried to clone my hhd for the ssd. It does not work
    -And then I tried to install windows on another hard drive 8.1, it works (-online my copy of windows and my usb boot are good)
    -J' tried to install windows 7 on ssd (MSC mode, ssd in the mbr). It works. (=> my work of ssd)

    I seek assistance to the microsoft community: (french)
    http://answers.Microsoft.com/fr-FR/Windows/Forum/windows8_1-windows_install/installation-de-Windows-81-SSD-non-reconnu-drivers/8c949621-518f-483a-9be6-62f30c1898fa?page=1&TM=1425582156449

    After investigation, we see a similar problem:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/storage-driver-for-SSD-to-detect-within-Windows-8/ca5c69b7-C331-4c37-98bc-32d6958f015d

    So, for you, what is the problem between my ssd and my laptop?

    Best regards

    Kevin

    Hello

    Have you tried to install Win 8.1 on the SSD drive using the MBR instead of GPT partition system?

    To be honest, I m confused due to the error message; No hard drive found. Click on load a driver to provide a driver for installing mass storage.

    As far as I know you don t need to add additional drivers try to install Win 8.1.
    The system already contains the basic SATA drivers.

    So I guess there must be a problem between the Win 8.1 and the SSD drive or SSD partitions.

    As mentioned, try to remove the partitions and create a MBR partition then try to install the Win 8.1
    Also try MSC mode.

  • Satellite Pro R50-B-V12 - mousepad sends browser back

    I have a Satellite Pro R50-B-V12. I found that if I accidentally drag the top edge of the mouse pad, it is my browser back to a page, boring, especially if I'm filled out a form or making a purchase.
    I'm not using two fingers sliding - he does it with one finger.
    I tried the control panel > devices > mouse properties > advanced > Action dashboard and disabled the Action from the top edge, yet it still happens.
    Someone has other suggestions please? Thank you very much!

    He thinks perhaps you use two fingers, try turning off the two fingers setting.

  • Function keys do not work on satellite Pro R50 - B

    Hello

    I've owned only my laptop a few months now and have not been able to find why my "key service" do not work

    If anyone has had this problem and how can I fixed that

    Thank you

    Dave

    Posted by david radish
    Hello

    I've owned only my laptop a few months now and have not been able to find why my "key service" do not work

    If anyone has had this problem and how can I fixed that

    Thank you

    Dave

    I have a satellite Pro R50 - B preloaded with Win 7 Pro.
    On the bottom row of the keyboard the second key to the left is a FN key.
    Press and hold the FN button active the function keys on the top row.
    I think that's how its supposed to work.
    If you cannot use the function keys, it could be linked to the FN key.
    Regs
    Nev

  • Satellite Pro R50 - B Series 10 Windows shutdown problems

    Hi out there!

    I wanted to just inform you on an enoying but reproducible BUG:

    Toshiba Satellite Pro R50 - B series:

    You must disable the Intel Management Interface in the Device Manager in the contrary case, the computer laptop didn't shutdown completely / Standbymode will not work.

    Question (Bios V1.4 - Intel ME 11.00.1166):

    Work more than 30 min. then try closing. Screen goes blank - but the LED on the stay before the fan stays on until the battery is completely discharged. Or try to go to sleep mode. Even the stop.

    Just disable Intel ME Manager of year Windows devices you fine.

    Waiting to hear from Toshiba - I m a reseller, so the same problem exists on > 10 notebooks here.

    Best regards, Bernhard

    Hi, I have exactly the same problem with my Satellite Pro R50 and Windows 10.
    Just installed the updated Toshiba Win10 drivers, but not a solution.
    Help, please!
    Best regards, Oliver

    EDIT: SOLUTION

    https://Forum.Toshiba.EU/showthread.php?81944

  • Additionnal 2.5 "HDD on Satellite Pro R50-b-141?

    Hi all

    I would like to put a 1 TB 2.5 HDD HGST "model Satellite Pro R50-B-141, is it possible to do because the 128 GB SSD is a little small for documents. It has a M-SATA connector I guess that there is an additional SATA connector to a conventional disc, but I have a doubt...

    Thanks for your help and for my English... sorry

    You want to replace the STRANGE with an extra HARD drive?

    I'm not sure if this would be possible because of the BIOS support... in many cases this additional HDD would not be supported by the BIOS...

    In the past, some series of portable devices such as Portege and Tecra which supports the Bay slime select functionality supported these additional HARD drive updates but as I know Satellite models do not have this...

    Then, probably, you will need to test...

  • Satellite Pro R50-B-10V does not to another HARD drive

    Hello

    I would like to exchange records between two Satellite Pro R50, then drives are detected by the BIOS, but fails to start with "no system disk". No password is defined for the disks and BIOS. In their original notebooks, the disks work fine. What's not?

    Michael

    Thanks for the clarification

  • Touchpad not working not not on Satellite Pro R50 - B - 10 G

    G ' Day

    I installed Windows 10 Pro on Satellite Pro R50 - B - 10 G and the Touch Pad and the function keys don't work no more.

    I turned around & around this problem bloody without any success

    HOW TO FIX?

    I'm a crazy old man & no free self-taught

    Thank you for your time

    Hello

    You have installed all available Win10 updates?
    http://win10upgrade.Toshiba.com/swup...=en&country=GB

  • Satellite Pro R50 - B - 10 K - RAM upgrade

    Hello everyone,

    I just want to know if the back of the satellite Pro R50 - B - 10 K gives access to the Ram and maybe to HD without opening the machine.
    Thank you in advance for your answer.

    Thierry

    Unfortunately this model does ram or hard drive to the cover on the underside, so if you want to have full access to two hardware components, down the cover should be removed.

  • Screen with Satellite Pro R50-B-14U problem

    Hello

    I was just given the Satellite Pro R50-B-14U pc.
    After I upgraded from 7 to 8. 1 and I did the updates Toshiba/windows screen randomly goes off, then on again after a second at intervals of about 1/2 hours.
    I tried to uninstall and reinstall the video drivers, but the problem persists.

    How can I fix it?
    Thank you.

    According to the specifications of the laptop you original Win8.1 DVD facilities, so I assume you are using for the installation of the OS.
    Have you noticed these problems immediately after installing the OS or later after the installation of updates?

  • Satellite Pro R50-B-12U - cannot start some application

    I have a new laptop Satellite Pro R50-B-12U. When I put in place, I gave my name and my password when you are prompted.
    I installed HMRC PAYETOOLS-RTI, but cannot enter it as a box arrives with 'You may need to check if you are allowed access to the following location on this computer' assistance please contact the manufacturer of your computer or your COMPUTER person support.

    I don't understand why I get that I have not set up a separate administrator and user.
    There is only me. I can use the program without any problem on my old laptop.

    Please help a user computer very not warned!

    This application is not known to me, but I think you should check the application developer / support manufacturer page how to install this software...

    It seems that there is a location on the HARD disk that is not available for a common user...

    But generally, you can start each application with the admin rights.

    Right click on the exe file and in the Security tab, you will see that access to the right for all users of accounts available on your laptop.

  • Satellite Pro R50-B-12U and memory update

    Hello

    I have a Satellite Pro R50-B-12u with 4 GB of RAM.
    I bought a 4 GB of additional RAM stick but can not see how adapt you it.

    My last Satellite Pro had a memory of flap at the back, but everything I see on the back is about 20 screws but no flap!

    Can someone please help me or point me in the right direction?

    Thank you in advance.

    TIF

    Hello

    Satellite R50 does not separate memory Bay.
    The memory modules and slots are hidden under the hood.

    To have access to modules, the cover must be removed.
    But I wouldn't recommend doing this because it would negate the warranty!

    I guess that your warranty is still valid and in this case only the authorized technician must perform these updates to keep the warranty valid.

  • Satellite Pro R50 - B - feature touchpad does not work

    Hello guys,.

    I have a problem with the touchpad of a Toshiba Satellite Pro R50 - b pssg1e - basically, I can move the cursor, but I can't use it to scroll or anything else.

    I encountered this problem of first on windows 8.1 and I thought he was not yet a driver for the touchpad. Now, I have installed Windows 7 64 bit and still the same problem. Idon't understand the problem, I installed all the drivers from the Web site, including «touch pad driver made by Alps» Electric

    In Device Manager, the mouse is recognized as just a Ps/2 compatible mouse. And in the mouse settings, I did not advance tab where I can activate additional functions of the touchpad.

    PS. the touchpad is enabled, so no, the solution is not fn + f5.

    Thank you in advanced!
    Andrei

    Hello

    Laptop Satellite Pro R50 - B should support the touch pad with gesture function.
    In the 40 user manual page, you can find information about the movements that are supported (tap, pinc ir stretch and two fingers scrolling).

    Two fingers scrolling present works as follows: place two fingers down and drag them vertically or horizontally anywhere on the touchpad. This allows you to use the window scroll bars.

Maybe you are looking for