Satellite Pro R850-1 - Port LAN: active / deleted cable

Hello.

I reinstalled Windows 7 Pro x 64 of the Toshiba recovery partition. It has installed all the drivers and software. The laptop works very well.
But, after the OS re-installationI it is impossible to connect to the local switch using the LAN (Ethernet) port. Adapter network (translation from German) reports: "identification of network / activated / network cable removed. See the video:
https://youtu.be/C6W_OBzRo8A

First time after about 10-15 minutes, I had a stable, added the laptop to our Active Directory connection. But after that restart the laptop cannot connect to ethernet.

I installed the driver LAN of the 15.7 and updated the BIOS to 4.10
The situation has not changed.

I also tried to use an IP address to fix instead of DHCP - always problems.
Tried different LAN port on the wall - always problems.

Another laptop work well on the same ports.

The LAN port has worked before you restore the OS of the recovery.

I don't think that the LAN port has real hardware problems.
Maybe I just need to change a few settings of network card in device like the speed Manager and so on.
The problem is - I go to this place once a week and it would be nice to have a few other ideas which might help.

Hello

After the recovery specifications own image installation has "standard" setting so LAN should work without any problems, except that you have changed some settings.
Over the last 10 years, I got a lot of machines many times and I have never seen anything like it. After LAN laptop wired needs about 30 seconds and connection must be very stable. The two LEDs near the LAN connector must be ACTIVATED (green LED flashes, of course).

I don't really know what to suggest. Maybe you need to reinstall new OS.

Tags: Toshiba

Similar Questions

  • Touch pad stopped working Satellite Pro R850-143

    I have a satellite pro R850-143 and be back on these forums, I need help!

    My touchpad has stopped working and I cannot use the mouse if I attach a USB

    Everyone could speak more, or I'm leaving I better return just to Toshiba (it is only 3 months old and still under warranty)

    Hello

    Are you sure that the touchpad has not been accidentally disabled by pressing a combination of keys?
    Usually the touchpad can be activated a disabled using Fn + F9
    Have you tried that?

    If this isn't it!

  • Satellite Pro R850-15F - freezing randomly and the fan speeds up

    Hello

    I have a Toshiba Satellite Pro R850-15F who gave me four years in refurbished condition and so it is quite old.
    I have recently installed Windows 10 and things seemed to work very well.

    However, last week, I noticed that at least once a day my laptop freezes randomly and immediately the internal fan accelerates, becomes much stronger and a cold air. Whenever this happens, I turned off the laptop and turn it back on it.

    After that, it works normally again until the next time it freezes. I don't know anything about computer hardware, but I suspect that it is a problem of series and I wanted to get some advice in case my laptop is close to dying.

    If anyone has any help or advice or suggestions to solve the problem, then I would be extremely grateful if you would contact me.

    Hope to hear from someone soon,

    Flashback

    On this virtual path, it is not easy to say what the problem is here. To me, it looks like problem with some background process that as a result of extremely high CPU usage that locks the phone whole.
    High CPU usage means more heat in such situation the fan starts to run a lot faster.

    Have you noticed this behavior with a specific action or the use of certain applications?

  • Satellite Pro A60 and Port Replicator

    I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

    Hello

    I understand your problem in this way.

    You have connected the printer via Port Replicator ports for the A60 SatPro.

    Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

    Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

    When you want to validate this information, it would be easier to help you!

    Bob

  • Satellite Pro C650 - USB ports now DEAD

    Over the past 48 hours have really struggled to get my USB ports work,
    Toshiba SATELLITE PRO C650 lappy running W7... At only 2 usb ports.

    A couple of days, I bought a new stick of memory... 16 GB SanDisk Cruzer Blade... He stuck in lappy and anything that happened outside my mouse attached wireless stopped working.
    Since then, the ports were completely dead. (stick now appears on anotherPC)
    That's what I did so far, after a search web solutions thro...

    Device Manager display ports everything is OK with no exclamations...
    When I insert any USB device... no sound confirmation of PC and Dev Mgr flinch...
    Tried to uninstall port/hubs and leaving W7 re-install them using... Still dead...
    Trying to remove battery and power sector during the centuries, then re start off the power... Still dead...

    I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs.
    I really want to be sure ive tried everything before you do this.

    Could I have really damaged the MB. ??
    I now nowhere so fast if theres anyone out there has any suggestions please shout...

    > I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs

    Even if it s really painful to get everything installed it again, I would recommend to recover the laptop using the Toshiba recovery disc or HARD drive recovery.

    > Could I have really damaged the MB. ??
    Well, it's hard to say before trying the recovery procedure.
    If the USB ports are not working after using the recovery disk (or HDD recovery), then of course: the mobo may be affected, therefore, in my view, the laptop must be set to the factory settings.

  • Video capture with a satellite Pro M70: which ports and drives can I use?

    I want to edit my home movies on my Satellite Pro M70 using WXP Pro (win dvd or movie maker). I want to capture video from my panasonic camcorder that has digital strips. What are the ports that I can use and what cables do I need? I'm desperate to edit my recent wedding video to put on DVD and mail it to my mom. The panasonic website has ignored me! Any advice anyone?

    Well, as far as I know this unit has only one S-video output port. In this case, you can connect the laptop to the TV and look at the photo of laptop to TV but it of not possible to receive all the signals of TV or any other device on your laptop.
    To receive the signals, you need a composite or a s-video port.

    However, if the camcorder has a firewire if port you can send digital files through the firewire connection. But this should only work with digital files that are saved on the camcorder.

    Please also visit these helpful sites:
    http://www.Camcorderinfo.com/content/connecting_cam_to_computer.htm
    http://www.Educ.TTU.edu/HOWTO/Vid_Room250_Connections/vid_connections.html

  • Satellite Pro L20 USB ports no longer work

    Hello

    A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.

    Things I've tried so far:

    Reinstall the chipset drivers
    Update the BIOS.
    Ensure USB is enabled in BIOS
    Uninstall and reinstall the USB controllers via the Device Manager.

    The USB ports no longer work and I ran out of things to try. Any suggestions?

    Thank you

    Hello

    If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.

  • Satellite Pro 6050 - out port (RCA) TV does not work XP

    I received a Satellite pro 6050 which had Vista installed on it, I downgraded it to XP, but the port RCA no longer works (worked on vista).

    Can anyone suggest a solution?

    Thank you

    Hello

    > I have the display mode to extend the desktop on the second monitor, and I think it sends the output SVGA mailed rather than the TV output
    This could be the key; try to use the FN + F5 keys until you have to spend on TV and not on the external monitor.

    Good bye

  • Re: Tight Satellite Pro A200 USB ports

    Hello

    I received my A200GE - 26Q Satellite Pro yesterday (yay!) and I was testing every bit of last night. The USB ports are extremely tight. I almost have the USB in the force and pull VERY hard to get it out. What develops these damage the ports/usb?

    Also, is there anything we can do about it? I don't think that Toshiba will change that because they work and therefore are not eligible to be fixed under the warranty.

    My DVD player is also quite noisy. Is this normal?

    Hope you can help!

    Help, please
    Thank you
    Edelweiss

    > I got my A200GE - 26Q Satellite Pro yesterday (yay!) and I was testing all the bits last night. The USB ports are extremely tight. I almost have the USB in the force and pull VERY hard to get it out. What develops these damage the ports/usb?
    Don t think that can damage anything, but if you connect or disconnect something and then be careful don't use force.

    > My DVD drive is also quite noisy. Is this normal?
    The CD/DVD drive is always a bit harder while working.
    I guess that there s nothing unusual.

    Best regards

  • Satellite Pro L20: Headphone port crackling noice at startup

    Hello

    I'm a uniform crackling noise that I've isolated to the headphone jack (green) of my Satellite Pro L20, who is just coming (2 days) for his first birthday, running XP Pro SP2 with all updates installed and no apparent driver problem.

    This noise occurs without any sound applications to startup and running, namely when you tilt the computer and Windows loads or when you get back to windows after hibernation. If I plug headphones in this port, of course, the sound is removed. All audio applications seems to work OK (for example Windows Sound, iTunes, Etc.) and so it's disconcerting.

    Any ideas?

    Thank you.

    Mikey UK.

    Hello

    During the operating system boot process Windows uses a standard, stored audio file on the HARD drive.
    This audio file can be disabled, or you can choose another.
    This can be done in the control panel-> sound and audio devices-> Audio tab

    Choose Start Windows box program of events and check if audio windows xp demarrage.wav the file plays without crackling noise.
    If crackling noise appears then I assume that this file is corrupted.

    You can also choose another file wav for this event or you can simply choose no and no sound will appear during the Windows startup process.

  • Advanced for Satellite Pro A120-105 port replicator

    Hi all, I'm a Satellite Pro A120-105, but he's only got the basic spec ports and I want to get the III or III advanced port replicator + I need a firewire connection.

    What replicator is compatible with the model of laptop above?

    Hello Anthony

    All laptops can be connected to port replicators have port replicator port in the lower corner. Are you sure that your laptop have such port too?

    I ask this question because the specifications of laptop for your laptop model says that there is no such port on your laptop model. Check it out!

  • Satellite Pro M70 - USB port does not recognize the device

    My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

    The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

    What is the problem? Can do nothing about it?

    My operating system is XP. and my laptop is 4.33 year.

    Thank you.

    Hi Mannix,

    Have you already updated the chipset drivers?

    I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

  • Satellite Pro 6000: what is a 3rd Brown cable to WLan?

    I recently bought a second hand toshiba satellite pro 6000. When I bought the wireless adapter is not connected correctly, the black and white wires are connected to the mini pc card, but there is a Brown wire with the same end of the connector that is loose.
    I don't see where it is supposed to go, and the result is that the quality of the connection is bad at 13%.

    If anyone could tell me where this third cable must be connected to it should enhance my quality link (the signal is excellent at 100%)

    Thank you.

    Hello

    The 3rd cable does not for me but maybe it's for BT. as far as I know that you need to connect only 2 cables to the Board of Directors to use the Wlan. The performance has nothing to do how many cables are connected.
    The white cable usually goes to the hand and the black to the auxiliary voltage

  • Satellite Pro R850 - 15 H - recovery deleted partition

    My brother was playing with my phone, apparently accidentally deleted partitions on my HDD recovery so that I can not install them the system now. What should I do?

    Now, you have two options:
    1 / you can order the original recovery image for your model of laptop on https://backupmedia.toshiba.eu/landing.aspx

    2 / you can install the version of the OS. All the necessary drivers, tools and utilities, you can download it from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

    If you have any other questions you are welcome.

  • Satellite Pro L10, the hard disk activity?

    Hi, I noticed that on my new L10 Pro of Satellite keeps it hard drive light flashing every 3 seconds approximately and I can also hear disk activity, even when he's just sitting there idle. I was wondering if this is normal, if so why? I was a little suspicious, so I checked all processes running, nothing suspicious. I thoght maybe it's because my drive is fragmented, then defragmented but no change. I thought maybe theres a kind of disk being cached on. I have 512 MB of ram and adequate committed virtual memory, if its doing with VMM is this normal?

    Hello

    It is not easy to say what the reason for this. I had a similar problem with my Satellite. The HARD drive was very often active and very slow. In my case, the reason was the antivirus software. The scanning of the HARD drive has been the almost permanent process and something to work on the machine was almost impossible.

    After removing the antivirus software HDD is fast. Now, I found a new and there is no problem more.

Maybe you are looking for

  • Satellite P100-187 - initial problems (equipment)

    Hello.. I have a Toshiba P100-187 with no warranty on it, so I'm in a bit of a slump here... I'm a technical engineer certified to another company which should be for the stayno name... The computer starts very well, but theres no picture during the

  • HP Officejet Pro 8500 A910 won't print web pages in 10 Explorer with Windows 8

    New computer of windows 8 with Explorer 10.  All other computers print fine with my 8500 Pro but it will not print anything except the headers and footers of web pages.  I have chosen European Windows so this isn't the issue.  Other programs work jus

  • No room left even if I delete songs - using Mac, empty the trash

    I use my Sansa Clip to listen to audio books only. Lately even if I delete the books there is a msg saying no left when I try to add more space.  I'm emptying the trash on my Mac that I use to manage files Sansa.  Memory says 3750 used, 22Mo left, no

  • Looking for MIBs to various devices of PowerVu

    I scoured the cisco.com site looking for MIB and apparently they aren't there or I can't find them.  I'm looking for MIBs for following PowerVu equipment... D9854 D9828 D9850 D9824 D9858 Thank you! Bob

  • Impossible to uninstall the game Wheelman

    I can not able to uninstall the game "Wheelman by Synergy" by Ubisoft to my Windows 7 PC. While I click on the "Uninstall" in the Control Panel button, it displays a dialog box "you don't have sufficient access to uninstall Wheelman. Please contact y