Satellite Pro S300 - cannot extend the desktop to an external monitor

Similar Questions

• Satellite Pro L550 - cannot get 1920 x 1200 on external monitor

  Hi all

  I can't get nativ resolution (1920 x 1200) to my external monitor via HDMI conection.
  Catalyst or monitor settings in windows XP gives max res only 1920 x 1080 - why?

  NB Satellite pro L550 (ATI 5165, hdmi), LG L245WP (hdmi). Thanks for the reply.

  Hello

  Cable HDMI and the port, would support the resolution 1920 x 1200, but the fact is that if the graphics card or the graphics driver doesn t card supports this resolution, then you won't be able to choose and use.

  In your case I would look in the user manual and check if the graphics card would support this resolution. If the graphic card supports the problem could be related to the graphics card driver that does not contain this resolution.

  Greetings

• Satellite Pro L670 - 16Z BSOD after start and an external monitor

  Hello!

  I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
  Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
  Systems running Windows XP. I have this with both of them with different external monitors.
  I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

  Any suggestions?

  Concerning

  Stephan

  Are you using the original recovery image Toshiba WXP?
  Can you start Windows XP Home edition in safe mode?

  The port on which you are using to connect the external monitor?

• Impossible to extend the desktop to a secondary monitor

  Hello

  So I recently bought a new monitor, I have already been operating my TV.
  But now I want to be able to extend the display on my desk while watching TV on the internet, I can just do drag to my TV and sit on the couch instead of having to sit in front of my screen.
  I go to the screen resolution, and it detects that the two monitor are connected. The monitor (1920 x 1080) is connected to the TV (1280 x 720) with HDMI DVI.
  The two are connected by the GPU.
  But when I click on extend the desktop and then try to save an error message appears telling me that it is impossible to save these changes.
  I don't know what the problem is, the two screens are connected, the two works but I can not extend the display.
  My GPU is a 6950 Gigabyte, and it is updated to the latest drivers.
  If anyone can help solve me this problem I would be very grateful.
  Thank you

  Hello

  Error message "Cannot save the display settings" shows essentially that you try to extend or duplicate the Office for external monitors.  I suspect that the problem occurs because the computer remembers the two configuration for your extended monitor and TV.  To extend your monitor, you must delete the multiple configurations for your computer, then extend your display by changing your display settings. To do this, proceed as follows:

  The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

  Remove the registry key.

  a. press Win + R to open a run dialog box.

  b. in the run box, type regeditand then click OK.

  c. look for the following registry subkey:

  d. HKEY_CURRENT_USER\Software\Microsoft\MobilePC\TMM

  e. right click on the subkey, and then click Remove.

  f. When you are prompted to confirm the delete operation, click Yes.

  g. on the file menu, click exit to quit the registry editor.

  Log off the computer. Then, connect to the computer.

  Extend your display by changing the display settings.
  a. open the screen resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.
  b. click on the drop down next to several screens, click extend these screens and then click OK.

  For more information, see these articles.
  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

• Satellite Pro L500 - cannot install the Realtek LAN driver

  Hi all

  I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop.

  The installation of the driver software program doesn't seem to work properly all the time, tried several times to install with only once a realtek 'repair' option becomes available.
  When I managed to install the driver I got an error "the device couldn't start. After restoring I also had problems with a "controller driver simple communication PCL.
  which seems to have been an Intel MEI according to the SAT, DEV info displayed in the information systems.

  If these problems are linked and how to install the driver required in an automated system if the system does not correctly detects hardware?

  Hello

  I m not owner of the Satellite Pro L500 but have you ever tried to install the latest driver Realtek LAN official site of Toshiba?

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Re: Satellite Pro A40 - cannot find the boot order in the BIOS

  Hi, we have a very old A40 Satellite Pro with a new hard drive.

  We are tryng to change the boot order in the BIOS to recognize the CD player ready for the windows disk. However, there seems to be no option to change the BIOS not boot order, and Yes, we tried the road from Toshiba which suggests press C during startup until and F12 to select the drive during boot, or what kind of work.

  Please can someone help?
  concerning
  Karl

  PS: The current message on the screen during startup is THAT BOOTMGR is missing

  Hi karl1966,

  Have you checked if the CD/DVD drive is recognized correctly in the BIOS?

  Maybe your drive is noisy and you should try another. I put t disc you used but try with Toshiba and Microsoft Windows disk recovery disk.

• Satellite Pro U300: Cannot see the HARD drive during the installation of XP

  Due to the restrictions of the network must downgrade the operating system on a new satellite Pro U300. I am unable to run the XP + sp2 cd as it says there is no hard drive installed on the machine. I guess it's because I need 3 scsi drivers or third-party raid.

  Does anyone have these or know a place where I can get my hands on them? Or am I completely off the mark that you have another solution?

  Hello

  You need the Intel Matrix Storage Management utility for the management of your local storage, including the RAID support.

  On the European driver Toshiba page I found Robson tea for Vista package which includes the Intel Matrix Storage Management utility.

  The same can be downloaded from the Intel page for the XP operating system.

  I found this on the page of Intel:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  Something similar is described here in this thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749

  Good luck buddy

• Satellite Pro 4600 cannot load the BIOS update

  Satellite Pro 4600. When starting I access Windows 2000 screen and then get the blue screen "The ACPI BIOS in this system is not fully compatible with ACPI." Please contact etc etc for BIOS updated. I downloaded version of update of the BIOS 2.60 since the Toshiba site and installed with a message "installed successfully". I always get the "bluescreen". Where I'm going wrong? Help would be appreciated.

  Y at - it the ability to boot the operating system in safe mode? It works correctly?

  Did you have a new installation Win2000?
  Give us more information.

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Satellite Pro A200 cannot install the driver of storage on an unattended installation

  Hello

  I created an image of XP RIS for a Toshiba Satellite Pro A200 and have downloaded the correct drivers for this laptop.

  I scoured internet solutions on how to configure the .sif file and where to install this driver on the image that he won't seek the intall the storage driver so that it can not find the Sata HD to install the image.

  Everyone knows that before and if so please could you point me in the right direction I've been struggling with this for a few days now!

  Thank you

  Hello

  You must include the SATA drivers.
  The SATA drivers are part of the Intel Matrix Storage Manager, which can be downloaded from the Intel and Toshiba page page.

  Here's a nice instruction how to do this:

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• Satellite M30-104 - cannot set a good resolution on external monitor

  Hello world

  I have a Satellite M30-104 with a nvidia GeForce FX5200.
  This works well but when I plug in an external monitor, which is a widescreen 1440 * 900, I can not put the correct resolution, even if I install the latest driver.

  What can I do?

  Thank you

  Hello

  First of all you must check in your manual if your graphics card would support such a resolution external.

  But note; you will not be able to select this resolution if the graphics driver doesn t contains, although this resolution would be supported by the graphics card.

  As you can see two facts are important: driver graphics and graphics card can support this resolution if you want to use.

  Welcome them

• Satellite Pro A40 - cannot reinstall the OS

  Hello world.
  I can not intall Windows XP 2000 2003... or other Windows NT on my Toshiba satellite SPA40 technology.
  The computer cannot copy some of the filies as OEMBIOS. Dl_ DVD...
  When I insist it stops with this blue screen with "If this is the first time... disable the BIOS cache... '. ', then the computer is blocked.
  Please help me

  Hello

  Have you changed some settings in the BIOS?
  I recommend you set the BIOS to default settings.
  Alternatively, you can try to disable the external cache feature.
  If this doesn't help, try to upgrade the BIOS

  Good bye

• Re: Satellite Pro A100 - cannot download the Flash player to view the flash animations

  Hello

  I have problems trying to download flash player for my laptop.
  It simply doesn't get it. So I can't watch the videos.

  It drives me crazy.
  I don't ' know much about laptops.
  I tried to recover and still no flash player.

  Hello

  I put t know why you cannot download and install the Flash Player, but you must absolutely visit the Adobe Web site:
  http://www.Adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash&lang=engl ish

  I downloaded and installed this site flash player and it worked!

• Satellite Pro M70 - cannot install the Driver of Toshiba Power Saver

  Hi, I can not install driver of toshiba power saver on my laptop because instalation crashes with error 1610: the configuration data for this product are damaged. Please contact the support staff. I tried several versions of driver of standby power. I received the latest official chipset driver... Someone knows how to fix this?

  My second problem is with the battery, my laptop running on battery max 10 minutes (I have my laptop for 2 years) and I often force using battery power. Battery can lose so much capacity in 2 years even if I used for my battery once a week?

  Sorry for the English and thx for answer

  I think that you should not install this driver, the only saving electricity only.
  What about the battery? In my opinion, it is possible. In my opinion, the duration of battery life cannot be defined so easy.
  Some batteries perform well after 3 years of use, and some of them are dead after only a year.

• Satellite Pro 6100 cannot run the restoration

  USB keep "submit" when not in use for some time so want to restore laptop to factory reset - restore said press 'c' and the release back to boot from the recovery disc, but this doesn't happen - someone knows how to get to run restore disks?

  Hello

  Enter the BIOS and change the boot order. Disk HARD-CD-etc.
  Don t forget to safe settings. Check if the CD has no scratches on the surface
  But one thing is very interesting; What did you mean by keep USB 'fall '?