Satellite Pro S300 - screen is blank and can not restart
A week ago, I left my Satellite Pro S300-EZ2502 at night (as usual). It was fine tonight.
The next day, I got a black screen and a flashing light orange on the left side. I tried to turn it off, don't restart, no dice. I tried removing the battery and restart under just current alternative, nothing, I tried the opposite. Nothing. I tried to let the battery and then recharge. No help. Very rarely when I plug it in again, I will get the green light for a few seconds, but then again the yellow flashing light. Nothing EVER on the screen.
I've only had this laptop since MAY! What's wrong!!
Have you installed extra RAM in the system?
Try to remove one of the Modules or swap them around.
Otherwise, it may be a motherboard problem. An FSL can repair it for you - free if its under warranty.
Tags: Toshiba
Similar Questions
-
When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?
Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."
-
Satellite Pro L20 - recovery utility hangs and does not complete
Hello.
I've been running my L20 Pro Satellite for two years now, quite happy. Unfortunately, in the last 3 months, he began to misbehave. The startup time stretched to 5-10 minutes by that I mean time spent in "black" screen between the initials XP boot logo and the bright blue splash screen Windows. Playing sound/media crackled and stuttered badly through the loudspeaker. So, being reasonable technical, I've read various articles forum tried MSCONFIG tweaks here and there, removed all viruses etc... Nothing helps.
I began to suspect a HARD drive problem. CHKDSK has not shown any errors. I finally resolved to back up my data and attempt a complete recovery. (Virgin!)
Unfortunately, this is going to plan. medium 90% up to the end of the NVA Toshiba Recovery Utility 1.0.1.0 I think, started making subtle beeps and stopped on the 'X:\03596002 '. File of the GHS. The Green HARD-drive activity light has renounced his reassuring twinkling. Nothing.
Any suggestions tips out there? I am currently in the State where he can not start (no NTLDR found).
Help.
Thank you.
HDD on SP L20 interface is - Serial ATA Rev. 1. 0a.
For the replacement of Satellite Pro L20 HDD or upgrades, you can use follow hard drives:
With 4200 RPM.
Fujitsu MHV2060AT
Fujitsu MHV2080AT
Fujitsu MHV2100AT
Toshiba MK6025GAS
Toshiba MK8025GAS
Toshiba MK1031GASWith 5400 RPM
Fujitsu MHV2060AH
Fujitsu MHV2080AH
Fujitsu MHV2100AH
Toshiba MK6026GAX
Toshiba MK8026GAX
Toshiba MK1032GAXSo, you can choose one of these hard disks for upgrade. If you now of 60 GB inside buy 100 GB for replacement.
-
Satellite Pro P300 - screen remains blank after power on
My Toshiba Satellite Pro P300 power on, the screen remains blank.
Can someone please help?
Looks like a FL. inverter problem
I doubt that you could replace is it s a job to a service technician.
The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog -
Satellite Pro M70 - screen is blank
Hey guys,.
Have had my Satellite Pro M70 for more than a year now and never gave me any problems before. On about 3 times now, the screen disappeared all of a sudden completely gray and white and stays that way, unless I restart and is so very well.
Appears to be spontaneous, can't everyday and not even aware if his reason leaving for a long time.
Ive noticed that more than half of the screen flashes from time to time but don't know if it's because it's on during a long period or heat related but only started to do this recently.
It just seems to be a problem with the monitor, like running programs under were unaffected (IE if I was running MSN messenger and the screen went gray, I could still type messages, etc just not see them!).
Have the latest graphics driver for my Intel knowledge: 6.14.10.4363, don't know if it could be a problem with the card? Hepatitis a lot of free hard disk space, seeking to increase the ram (currently 512) suggestions?
Hello
I am very happy that I don't have these problems on my Satellite M70. I recommend you test your laptop connected to an external display to see if the symptoms are the same. If so, I fear that there is a problem with the graphics card.
On the RAM, can I just say that your laptop can handle with max 2 GB RAM and compatible RAM modules are:
512 MB (PA3412U - 1 M 51)
1 GB (PA3411U-1M1G)Good bye
-
Satellite Pro S300-12O - Sound Forge 8 does not
Hi guys out there, I hope someone here can give me some advice.
First of all, I have a laptop Toshiba S300-12O bought in January. I downgraded to XP Pro via upgrade disk lower.
I had zero problems until recently when I installed Sony Sound Forge 8 on the machine. I tried to burn an audio CD using SF8 and the machine hung, SF8 answers do not. Nothing worked at all and I had to manually turn off the machine. Had another crack at it and she said then there was a serious error and the PC have closed, etc..
Sent the error report to Microsoft when the machine has restarted and said that he had recovered from a serious error, etc.This could be a driver problem? I had a quick glance but can not find the drivers out there apart from the one which allows you to play DVDs on the laptop.
The optical drive is TEAC DW-W28-RT multi layer. I can open the drive to SF8, not tried burning mp3 mp3 files or anything yet.
I have not tried burning a disc audio using any other utility still or actually burned anything on any software. SF8 is my overwhelming favorite and I would use it as I do a few edition of music etc and this is my software of choice. Any advice greatly appreciated guys.
Hello!
To be honest, this program is not for me, but in my opinion, you should look for an update on the site of the factory.
Check if the program is compatible with Windows XP.Last but not least, you should check if you have the same problem with another program. I think that it is a question of the program that you are using.
Good bye
-
New on Satellite Pro 6100 WLAN card installed, but can not be activated
Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".
I tried upgrading to the latest version of BIOS
I reinstalled the latest drivers
Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.Past and present, wireless card fail to see any network.
Martin
Hello Martin
This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.
I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
What do you think of this? -
My PC Win Vista (not sure if 32 bit or 64) continues to display blue screen. Today, he continues to display blue screen when starting, and I can not even accept F8.
Here's what it shows the blue screen before. Hope you could give me some advice what I can do next. Thank you!
A problem has been detected and windows has been shut down to preventdamage to your computer.
DRIVER_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you have seen this Stop error screen, restart
your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is installed correctly.
If this is a new installation, ask your hardware manufacturer or software
the windows updates, you might need.
If problems continue, disable or remove any newly installed or
software. Disable the BIOS memory options such as implementing caching or shading.
If you need to use Safe Mode to remove or disable components, restart your
computer, press F8 to select advanced startup options, and then select
Safe mode.
Technical information:
STOP: 0X000000D1 (0X00000000, 0X00000002, 0X00000000, 0X855F7395)
nvstor.sys - address 855F7395 base at 855F3000, DataStamp
46671a 61
Hello
nvstor.sys is a Nvidia video driver.
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of problems and when you get to the section driver view
for generic methods in the next message and then back to the if necessary troubleshooting tool.Look in the Event Viewer to see if something is reported on.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm
-------------------------------------------------------------------------
My troubleshootter of bluescreen generic, when you get to the section driver go to the next message, then
return to this one.Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-----------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Satellite Pro P100 - screen is blank
Computer seems to be on, but the laptop screen remains empty.
OK so for the moment, the power light is on and HD and the rear fan is not on and when I press the power button, the HD and the rear fan turns on and then the power light just flashes but nothing is on the screen and the lights (capslock/numlock etc.) keyboard flash not as they would on a start upward. Which leads to presume that the laptop is in hibernation or something, but it should come out of hibernation (if that were the case) on a press on the power button, but nothing happens when I do that.
also connected an external monitor to the back of the laptop, nothing on the screen as well.
any ideas?
Hello
HM, it could be a problem of motherboard or something else. I doubt that it s an inside problem appears because tested an external display and here you can see the same problem.
What you can do is the following workaround: remove the battery and the AC adapter and wait an hour. Reconnect the adapter AC/DC and battery. Now, you can try to restart the laptop.
If it doesn t work I would ask for a portable computer technician of an authorized service provider. Maybe it s a hardware malfunction and the ASP can test your laptop.
Good bye
-
Satellite Pro A100 screen goes blank for two seconds
Since I got my machine in June, it has obscured the screen for a few seconds every now and then - probably once or twice a day.
Is this serious and likely to get worse - should I send it until the warranty runs out?
It might have something to do with Flashcards. I don't know what it is, but whenever I start, he refuses to quit smoking.
Thanks for your suggestions.
Hello
> Is it serious and likely to get worse - should I send it until the warranty runs out
I think that it s not easy to say if it could be a serious hardware problem or just a driver issue.I have a few questions;
First of all; have you checked whether a BIOS update or update the graphics driver was help? For the most part, these updates do wonders ;)How about new installation OS since the recovery CD? Have you checked if the same problem appears on the new OS installed since the recovery CD?
I think that this should be checked first.
-
Satellite Pro L40 - has stopped working and will not start
Nothing happening, no spark of life, even if it is plugged to the mains. I have ALL of my info stored on it, including their e-mail addresses...
(1) is it the battery?
(2) it is likely that it might be corrected?
(3) if irreparable, can data be transferred from a laptop dead to another PC or Mac Book of my partner?
Thank you very much for taking the time to read and thanks I advance for any help, you can be so good as to provide...
Toni
Hello!
Normally, if the boot of t computer doesn't and you can see anything on the screen it s a hardware malfunction, maybe the motherboard needs to be replaced.
But in your case, I'll try this:
Remove the AC adapter and the battery. Wait one hour, then reconnect the two devices. Try to start the laptop.If it doesn't work, you need to contact a service provider for help. They can check the laptop and determine the cause of this problem.
And your data, you can easily without danger on the other computer. Just put the HARD drive in the external HARD drive enclosure. You can then connect the HARD drive to another laptop to backup data.
But normally all data should be backed up already! ;) -
Satellite C660D - 181 Power Cord issues and can not read CD or DVD
I have a Toshiba Satellite C660D-181 and my power cord has had problems with the connection. I plugged it in and the light on the left indicating it is plugged in and charged off and my cell phone begins to lose his load.
I must escape around and try to get it just in the right position to show him it is plugged. I have it plugged into an extension of the Strip which is connected to the main outlet (and the only outlet) in the room.
I use it exclusively in the living room so I'm close to the telephone and TV, so move it to another room will not be the answer. I'm afraid that the repair costs would be too high and the purchase of a new laptop computer is out of the question for now.
Another question, I'll have, it's that I can't read a CD or a DVD. I have Windows Media Player and Apple Quick time Player. I chose to play the media instantly, but it still does not work. I installed cc registry cleaner to see if it was a registry problem, but no joy there. I have Windows 7 Home Premium 64 Bit.
The most important issue to address at the moment is the power supply cord. I appreciate your help. Please, profane as computer jargon escapes me.
> I worry that repair costs would be too high and the purchase of a new laptop computer is out of the question for now
What is this option? You want to fix it yourself?
Don t think that it s a real option since you would need good parts, hand tools, maintenance and find out how to fix it.Since you and I don t know exactly the cost of repair, I would recommend first asking how this fix could be I mean, you can request a service in your country for a price and could decide if its worth for you
-
Re: Satellite Pro A300D - relocation after Vista, I can not scrolling on the touchpad
I could scroll with my touchpad moving my finger from right above on the right down on the touch pad, on the first installation of Vista on my A300D-161
Now, I reinstalled Vista and I installed the utility, but it is not an option for scrolling.How / what now?
Thank you
Hello
Do you have what utility installed?
You must install the driver for the touchpad on the Toshiba site. After that, go to control panel > mouse > Device Settings > settings. Here, you can enable virtual scrolling.
Good bye
-
Satellite L650 - recommendation of the OS and can not install drivers
HY,
a deploy a satellite L650 - 18 X and I tried to install windows 7 seveeral times... (x 64 editions) without success, I managed to install an edition clean windows 64, works fine but I have a problem, cannot install the drivers for the keys fn; coomon installation module tracks ask for a reboot but after reboot when I want to install other drivers for the "common module not found" displayed error fn keys...
I want to know what operating sistem u would recomand me and so is windows 7 How do I find sata driver, o I already serch the forum how to do this on the l series, but could find nothing
Hello
> I tried to install windows 7 seveeral times... (x 64 editions) without success, I managed to install an edition clean windows 64
Where is the difference between Windows 7 64-bit and Windows 64 edition? In my opinion it of the sameIn any case, best recommendation of OS is version preinstalled Windows in my opinion, because he configured Toshiba s with all the drivers and tools you need. No additional installation is necessary and your laptop is ready for use.
Generally for the FN keys you need Toshiba value added from Toshiba Web site package.
-
What should I do next?
Hello Paul,
This error message do you receive when installing?
Close all Adobe applications.
Please consult the give the link to download: download Acrobat products | Standard, Pro | DC, XI, X
Concerning
Bianka Attre
Maybe you are looking for
-
Unable to show cloud offline reader kindle
followed the instructions to see the books in offline mode, but nothing helped. Changed the setting to allow the storage connection and refresh the page as instructed, but the demand letter (default) always ask. Using window 7 and the last ver.29 of
-
When I click on my Firefox icon instead of coming yahoo I get a page that says 410 Gone. Sorry, gone the requested resource is no longer available on this server and there is no forwarding address. Remove all references to this resource. Please check
-
How to change my motherboard without messing up my Windows XP install?
I use windows xp professional, licensed version. My motherboard is now out of use. I want to change it without disturbing my version of windows update. How can I do? Should I I installed windows XP again and update again? Is there another way that my
-
I can not connect by dial upward
some service that allows him to connect does not start Protocol of remote procedures
-
BlackBerry software correcting spelling when you type in the environment of mixture
Hello I'm really loving the environment mix so far, but am annoyed that text entry is not the same as on the current device. So the mixture to be a true extension of office for the BlackBerry device, it must have the same entry and the grammar of tex