Satellite Pro T130 - unable to wake from mode 'sleep'

Similar Questions

• Satellite Pro P300 - 1 CG wakes up fashion 'sleep' when unplug USB mice

  Often, I carry my laptop from one workplace to another.
  Usually, put mode 'sleep', unplug the USB mouse and throw it in the bag.

  However, whenever I unplug the USB mouse - laptop wakes up and I have to put back to sleep.
  It's embarrassing. Is it possible to set up portable _not_ wake on USB activity?

  I found no option in Vista power settings, or in the BIOS.
  My BIOS is up-to-date (just updated, but did not help).

  I use Windows Vista Business on Toshiba Satellite Pro P300 - 1 CG.

  Hello

  > Usually put in mode 'sleep', unplug the USB mouse and throw it in the bag.
  Why you n t disconnect the mouse USB first and then put the laptop mode ensures?
  That would solve your problem ;)

  To my knowledge, the BIOS provides only the options: wake on LAN, wake-up keyboard.
  There is no options for Wake up on USB and so cannot change these settings...

  See you soon

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• Satellite Pro T130 - Canoe turn on 3G WWAN

  Hello

  I have a Satellite Pro T130, Win7 Pro 64

  I had a few problems with the Ericsson F3607gw connection, and I was wondering if this is the right place to search for answers.

  1 to 3G _ RF _ power problem

  If I update to 1.4.0.10 then I can't turn on the 3G radio. There is no hardware on the laptop switch and using the software switch Fn + F8 has no effect on switching the radio on or off, it remains off. Rear winding to the power utility earlier (T3G140701 F36) makes the problem disappears, but is there a fix I missed somewhere to use the 1.4.0.10? I can live with that, unless 1.4.0.10 something that I don't know that I'm missing.

  Problem 2 - Ericsson driver with ConfigFree

  I've recently updated the driver package from Ericsson of R4C02 to R6A06 (Ericsson driver version 1.5.0.5). After doing this, the Ericsson 3 G connection no longer appears in the list of devices in ConfigFree! It's a bit annoying, because I can not include 3G (which I use a lot when they travel) in one of the profiles ConfigFree more. I have enable/disable the 3G connection by accessing the control panel and by using network connections.
  I upgraded 8.0.23 ConfigFree 8.0.27 but this did not help.

  If I missed fixes for these issues, I would be grateful if someone could point me in the right direction.

  Thank you

  Hello

  AFAIK the ConfigFree software is diagnostic software and cannot be used to set up the 3 G or WiFi.

  > Rear winding for the previous electricity utility (T3G140701 F36) makes the problem disappears, but is there a fix I missed somewhere to use the 1.4.0.10? I can live with that, unless 1.4.0.10 something that I don't know that I'm missing.

  If you have any problems using the old version, then you should stay with a good running version.

  This is a Toshiba 3 G portal:
  http://APS2.toshiba-tro.de/WLAN/index.php?page=3gdownloads

• Toshiba Satellite Pro T130 w / Windows 7 Home Ed - Dynadock U10 does not

  Any help is appreciated here.

  Recently purchased a new Toshiba Satellite Pro T130 laptop and a Toshiba Dynadock U10. Laptop has Windows 7 Home Edition is installed.

  Want to Toshiba to bind in Dynadock for wired keyboard, VGA screen, mouse. Installed software Dynadock and get and 'incompatible pilot' error no message - no indication of which, although. Computer laptop seems to be docked, however impossible to get VGA to work.

  I tried to install on a Lenova Thinkpad with Windows XP and it works fine with this, but not her own brand of Toshiba?

  Thank you

  Have you used the latest version of the software ""?
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 29 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 29 & driverLanguage = 42]-W7 32
  and for 64 bit
  [http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 376 & selSeries = 209 & selProduct = 834 & STAS hortMod = null & language = 13 & selOS = 30 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 72230 & OS ID = 30 & driverLanguage = 42]

• Satellite Pro T130 - WLAN stops working on battery

  WLAN in Toshiba Satellite Pro T130 will not properly work on battery
  Toshiba Satellite Pro T130 with Windows 7-64 bit

  My Realtek RTL8191se card stops working when the notebook computer is on battery power. Everything is OK on the socket. On battery it works OK for a few seconds/minutes and then drop connectivity. The driver is 2015.1.427.2010 - the latest version.

  I disabled the settings related to energy-saving WLAN cards.

  Any ideas on how to find the cause of this problem?

  Thanks in advance

  Chaouki

  Hey Buddy,

  Well, generally, I would suggest that you should disable Windows in energy saving power management feature, but you have already done this... Make sure that this power WLAN economic option is set for maximum Performance, even for the battery mode and all power profiles!

  And what BIOS up-to-date? You have the latest version of the BIOS installed or using an older version?

• Built in mic has stopped working on my Satellite Pro T130

  Dear Forum,

  the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.

  It captures the white noise.
  But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...

  Can't bring any changes to the software that could influence.

  What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
  And of course, it is not set to mute or upgraded to the bottom.

  Still no cure.
  What's next?

  Thanks much adavance.

  Hmmm, it makes a static noise? Kinda sounds like hardware related issue
  But check the microphone settings in the control panel-> sound-> recording tab
  Here, you should see two entries; internal microphone and external microphone port.
  The internal microphone must be turned on!

  In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
  Check this box

• Backlit keyboard for Satellite Pro T130

  I have a Satellite Pro T130 I have difficulties to use in dark or poor light. Is there an option of backlit keyboard? If yes how I turn it on?

  Hey Buddy,

  I checked the specs on the official website of Toshiba's Satellite Pro T130 and it seems this model isn't t equipped with backlit keyboard and insofar as all T130 models using a standard keyboard of half bright.

  So I think you have to life without this feature on T130 ;)

• USB drive unplugged when wake up mode 'sleep'

  I use windows vista business version for my 6400 Dell insporon laptop.

  When my laptop wakes mode ensures, in the wondows login procedure, it seems he disconnected from usb drives to not communicate with windows at this time. One of the USB (simpletech 2 TB) was not connected (it loses the drive letter in windows Explorer). Two other brand always connected.

  If I recycle the power of this USB, it connects back.

  Simple question: where can I change once and for all so that I don't have to recycle that drive usb every time when you wake up mode 'sleep' (she becomes very annoying since this USB does not start button / stop)? Personally, I think it's microsft windows 'default login procedure question' no usb drive manufacturer bug (contact usb drive tech support).

  Thanks in advance for any help.

  Hello

  The problem is perhaps due to several parameters being off, and you can actually have
  go through the list again. It could be you have a hardware problem with
  the USB port or might have to reinstall Windows. Even if it is complex you need to use this
  keep track and not as a menu.

  Another possibility is to use a clean boot to see if something in startup is at least partially
  in the mixture. It is the only method of control similar to your idea about the login procedure.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx Rob - bicycle - Mark Twain said it is good.

• Unable to wake up after sleep - HP pavilion DV6t - aiu55av - 9

  Unable to wake up after sleep - HP pavilion DV6t - aiu55av - 9

  tried on different keys-ctl alt - del - nothing works

  You can also view the latest BIOS update for your machine. Use the link at the top of this page-"Support & Drivers" - to find your support page templates.

• Satellite L850-A635 does not wake from sleep mode

  purchase date: June 6, 2012

  When I put it in mode 'sleep', he goes to sleep, but when I start, it awakens me unless I have remove the battery, put in place and turn it back on.

  Please advise me how I can solve this problem

  Hello

  What happens if you press the power button / stop 4 sec long?

  Please run a HARD drive recovery procedure: (F8, fix my computer-> Toshiba HDD recovery)
  Don't install any software, but test the "sleep mode" immediately after that drive HARD recovery is completed.

• Satellite Pro 6100, WXP SP2, once in mode installation ensures the unknown USB

  Hello

  After you install the update in Win XP SP2 on my laptop Toshiba SAT Pro 6100, the following occurs:

  When the laptop wakes from sleep mode, the USB connector is unknown and the communication is lost.

  Who knows the answer to this problem?

  Hello Erjee,
  you just need to install the version of the bios 1.90 or later.

  For other machines with the same problem after installing SP2...
  TE2100 v1.60 or later version
  SATELLITE PRO 6000 v1.60 or later version
  PORTEGE 4000 v2.10 or later version
  TECRA 9000 v1.40 or later version

• Satellite Pro L770 - 12 p - Wake-up on LAN is not possible?

  Hello

  I try to send a wake up message to LAN (WOL) on my laptop to propel to the top.
  I failed to make it work.

  But I do not see a strange thing happening: when I send a magic packet WOL while my laptop is running, the laptop restarts automatically after closing down.

  It seems that the Magic Packet is stored somewhere (perhaps in the NIC?) and is activated once the cell phone is off. I think a magic packet must be ignored when a machine has already begun and not be recorded and executed after the PC is turned off again.

  That being said, I did a test with another PC; I am able to send a magic packet via my business network. So the problem isn't somewhere else. But the BIOS of my Toshiba laptop does not pick up when the machine is off. Only when it is already running.

  Is this a bug and this bug can be resolved?

  Kind regards

  Alfons

  PS I have the latest version of the BIOS (v2.30) and I activated the Wake Up on LAN in the BIOS.

  Post edited by: avanzwol

  Hello

  According to the Toshiba driver page, the last BIOS update was 09/03/12 and I doubt that this new version of BIOS which will be released in the future. The Satellite Pro L770 series is already discontinued.

  However, as far as I know the reactivation of the LAN option can be found in the properties of the LAN card.
  Go to Device Manager-> LAN card-> properties-> Advanced tab
  Here, you should check if the WOL is enabled.

  By the way: the network driver seems to be Realtek. I recommend you update the driver of network directly from the page of the Realtek driver. I know that WOL is controlled at the level of the BIOS, but I think the update is worth a try.

• Portege Z30T-a unable to wake from sleep by any key

  I recently bought a new PORTEGE Z30T-A PT24CE-01600EN5
  upgreaded Version Microsoft Windows OS 8.1 Pro 6.3.9600 with its CD.

  I can't wake the computer from sleep by any key, but the power button.

  TOSHIBA has opton for this utility who supposed to put.
  I try the following:

  Office assist---> system---> keyboard settings

  Here, I activate the only option which he claims will power on the computer from sleep mode
  by pressing any key.

  But the machine never replies to any key, but the power button.

  Any of you guys have the same problem? No work around?

  Hello

  Are you sure that you set the laptop on STANDBY mode and not in HIBERNATION mode?
  In my case, the option works correctly if the unit is set to the mode "SLEEP".
  If deep sleep mode, I have to press the power button to wake up the unit

• Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

  Model No.: Satellite Pro U200 PLUA1E
  OS: Vista Business SP2
  Current BIOS: v. 3.50

  Try to update the BIOS to v3.70

  When I run P0044v370, I get a Windows Script Host message:

  "Script:
  C:\ProgramData\Toshiba\Common\_cabBDF1.tmp\autoExe c.vbe
  Line: 2
  Char: 1
  Error: Failed to create object named 'WScript.Shell '.
  Code: 8007007E
  "Source: WScript.CreateObject".

  I want to update the BIOS before the upgrade from 1 GB to 4 GB of memory. Also my U200 Pro keeps crashing and whenever before it restarts, I get a message saying something like "try to install the latest version of the BIOS" (it is not on the screen very long sorry can't be more accurate).

  I don't have have the recovery CD, I'm trying to boost performance because it runs very slowly.

  Everything is - I am in your forum people good hands! Thanks in advance.

  You have what Windows OS installed.
  It is Win XP?

  Update the BIOS needs an installation of the common Modules, so don't forget not that the common Modules are installed or this software update.
  The CM is on the page of the European driver Toshiba

  In addition, the P0044v370.exe unpacks the package I recommend creating a folder on the desktop and to decompress the files in P0044v370.exe first. Then move to this new folder and run the exe file in the folder.