Satellite Pro U200-128 - how to install 1 GB of RAM?

I can't yet get your hands on the user maual on this Web site, or do I have to say more. I got my 1 GB of ram, this morning, the last thing to do is to install!
Please kind people you give me instructions on how to do it?

Thanks in advance.

Hello

First the manual can be downloaded here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download user manual

Memory locations are under the keyboard. This means that you need to remove the keyboard for installation and the exchange of one or two modules of RAM.

I would recommend downloading the user manual as it contains an exact description how do.

Good luck! :)

Tags: Toshiba

Similar Questions

  • Satellite Pro U200 - no sound after installing Windows 7

    Hello

    I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

    G.Magnason

    Hey Buddy,

    Have you already checked the site Web of Toshiba itself?
    http://EU.computers.Toshiba-Europe.com

    I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

  • Satellite Pro U200-10I - how to disable the system at startup control upward?

    : x Hi,.

    I have Toshiba Satellite Pro U200-10I and I want to disable the control system, as it is a long time to start machine. Is there a way to Devil who?

    Nedd your help! : D

    Hello

    Just checking the system do you mean exactly?
    Is this based on Windows or BIOS based?

    If you mean the ScanDisk in Windows startup you can disable it in the registry:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager
    Change the BootExecute entry to: autocheck autochk *.

    After that restart the ScanDisk is disabled and doesn't appear at Windows startup.

  • Satellite Pro P300-1F1 - how to install a second HDD?

    Hello

    I would like to install a second hard drive to my Satellite Pro P300-1F1.

    I would like to know if I need a "cellar" special to set the hard drive inside the Bay? Where could I get such a thing in Germany (near Cologne)?

    On the inside of the drive Bay cover HARD are four plastic pins that are so long that it is impossible to close the cover when a hard drive is built in.
    What I have to just shorten or do I need a new cover or pins work like a kind of attachment?

    Thank you very much for your help!

    Is there a connector from the HARD drive in the second span?

    If this isn't the case, then you can not install a HARD drive in any case. The second span is because he shares a common design with models that have a second HDD of the factory.

  • Question about upgrading HDD on Satellite Pro U200-128

    Hello

    I want to spend my laptop U200-128 HARD drive. What is the maximum size of HARD drive that can be used? Is it possible to use the 250 GB HARD drive? My current BIOS version is 3.7

    Thank you

    Hello

    It will be very nice if you can confirm that the upgrade of the HARD drive has been successfully. All info on the hardware upgrade can be useful for other people who visit this forum.

  • Satellite Pro L300 PSLB1E - how to install the package added value?

    Hello

    I tried to update the value added package on my machine, I followed the instructions and removed my previous version and same clean your pc with ccleaner and tune up Utilities 2009 running but everytime I go to install new value-added package I get the previous version the same message delete first in the add and remove programs list.

    I deleted this checked and double checked add and remove and it is not the case to be found, but still without success installing the new software.

    Can someone help me solve this issue?

    Thank you

    Hay

    You have restarted your laptop after removing the VAP system?

    I have updated VAP on several laptops and have never noticed anything like that.
    After removing the VAP system new version was always installed correctly.
    I imagine that something is still in the registry.
    You can check it out and try to remove manually.
    Search all entries from value of Toshiba and remove it.

    If this does not all you can do is to install the new OS using recovery image. After the new installation remove VAP, restart your computer and install the latest version.

  • Satellite Pro U200-128: the missing letters when typing using Vista

    Hello

    I started facing a new problem after upgrading my operating system from XP to Vista. The problem is that after writing a text, I realize that it was missing some letters (sometimes seven times during the writing of these statements).

    There is no problem with the keyboard because when I re - get the letter it works.
    Also it occure with all the letters! Y at - it suggestions to solve this problem?

    Thank you

    Have you noticed the same thing using Windows XP?

    I noticed something similar on my old laptop. After the BIOS update the question didn't appear.
    Please check this!

  • Satellite Pro U200 - hard drive upgrade

    Hello

    I have a Satellite Pro U200-128 and you want to upgrade the hard drive. I can't find detailed specifications to show me the compatibility, drive type and therefore the size of a disc that I can buy.
    I think that its SATA, but there is a lot of info on SATAII, not sure if it will work in my model?

    Any help appreciated

    Hi ollieg72,

    You re right. Satellite Pro U200 already uses the HARD drive with SATA interface if you need a HARD SATA 2.5. In addition, it should be possible to use every ability because on SATA interface, there is no capacity limit.

    Anyway, SATAII HDD is also working because they are compatible to the old interface of SATA1 downgrade. So it makes no difference if the HDD is SATAII interface or not. ;)

  • No sound after installing Windows 7 on Satellite Pro U200

    Hello

    I just installed Windows 7 Professional on my Satellite Pro U200 10 p.

    Available for XP Pro.

    Sound has stopped working since the new facility (which fromatting the drive - no partition) and can not find a solution. The v6.10.1.6000 of SoundMAX Integrated Digittal HD Audio Driver is installed. I uninstalled and reinstalled several times, but this doesn't seem to be the right driver. I can't find info to tell me what the correct driver can be either. The Toshiba site is a little sparse on Windows 7 drivers for this model and gives no indication that the driver may be is.

    Windows 7 does not think that there is a problem and some reports that "this device works properly." in speaker properties > Configuration information dialog box. However not coming out, the speakers or the 3.5 mm jack

    Anyone got any ideas?

    Thank you

    James

    Hello

    Go to Device Manager and check what sound chip you have exactly:

    Use this statement:
    [How to identify an unknown device? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

    Then you should be able to find a good pilot.
    I also recommend remove/delete the sound card in Device Manager.
    Just select the audio remove card and press on, and then restart the laptop

    PS: Are you sure that the sound is not muted? Please check this too!

  • Satellite Pro U200 - installing the audio driver on Win XP

    I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

    Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

    Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

    -so finally you need to install the two patches
    -Download Realtek audio driver from the Realtek page
    -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

    Greetings

  • Satellite Pro U200: update BIOS - Toshiba common Modules is not installed

    Hello

    When I install update of the BIOS P0044v370 I have an error "Toshiba Common Modules is not installed.

    My laptop Toshiba Satellite Pro U200 with Windows XP Prof

    Pleas help me

    PS. I Don t have a Toshiba Recovery disk

    The message is pretty clear!
    The common Module is not installed and therefore you can not update the BIOS.

    Visit pilot European Toshiba, download the common Modules for Win XP and install it.
    Then you should be able to update the BIOS.

    Concerning

  • Re: Satellite Pro U200 - cannot install HDD protection Utility?

    Hello

    Know somwonw why I can't install:

    18/08/08
    HDD Protection Utility
    Toshiba Windows Vista 32bits 2.0.0.7 World Wide

    on my PLUA1E Satellite Pro U200-02802QS4 with Vista Business 32-bit?

    Hello

    And why you can install t HDD Protection Utility? You get an error message?

    Please explain your problem exactly because normally Satellite Pro U200 support this utility.

  • Satellite Pro U200: MS Office Documents open slowly after installing BT stack

    Hello

    As I installed the toshiba bluetooth stack (on my Satellite Pro U200) last week, MS Office documents are very slow to open when I choose them by double-clicking from windows Explorer. If I first start Office then use "Open" to open the document, the document opens very quickly.

    The problem disappears as soon as I uninstall the Bluetooth stack.

    This issue is documented on the nokia.com website and can apparently be solved using the instead microsoft bluetooth stack.

    However, I don't seem to be able to install this driver on my laptop.

    Is there a solution from Toshiba?

    See you soon,.

    Xavier.

    Post edited by: ADMIN

    I met the same problem. The problem disappeared after the installation of the previous version of v4.88 Nokia Suite.

  • Satellite Pro U200 - how to access the BIOS?

    Hello

    HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

    Hello

    I checked the forum and you should try to press the ESC key.

    It work? ;)

    Welcome them

  • How to disassemble the Satellite Pro U200

    Hello

    Lately, I have come to the need of the back opening of Toshiba Satellite Pro U200, you know the place where RAM and all the other stuff is stored.

    I have my tired to do it, but I could not open, so I was afraid to break something.

    Any of you know if it is possible to open the back of the laptop?

    If possible, it would be possible to close it later? :]]

    What you want to change on the laptop? The RAM?

    As far as I know the locations of memory are placed under the keyboard. Therefore, you must remove the keyboard stand and keyboard.
    It's a little tricky and if you n t have experience with this that you should ask a technician for laptop help.

Maybe you are looking for