Satellite Pro U200-128: the missing letters when typing using Vista

Hello

I started facing a new problem after upgrading my operating system from XP to Vista. The problem is that after writing a text, I realize that it was missing some letters (sometimes seven times during the writing of these statements).

There is no problem with the keyboard because when I re - get the letter it works.
Also it occure with all the letters! Y at - it suggestions to solve this problem?

Thank you

Have you noticed the same thing using Windows XP?

I noticed something similar on my old laptop. After the BIOS update the question didn't appear.
Please check this!

Tags: Toshiba

Similar Questions

  • Satellite Pro U200 - installing the audio driver on Win XP

    I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

    Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

    Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

    -so finally you need to install the two patches
    -Download Realtek audio driver from the Realtek page
    -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

    Greetings

  • Problems with the missing letters when the combination of Microsoft Word documents

    Hello

    I had a problem which I hope someone can help me with.

    When I combine several documents (9 total, .doc and .pdf files), some words have letters missing - leaving large voids in the words. It seems that, it seems to happen to positions with the font style "Arial (topics)."

    After some research, I realized that others have seen a similar problem and it could be solved in the Adobe PDF printer properties (properties > Preferences > defaults :).) However, after testing a few different settings, nothing seems to be fixing the issue and I will always have the same missing letters in the final document to convert.

    I use Adobe Pro XI - I was wondering if there is a update/fixes for this? I'm on version 11.0.07. For some reason, I am unable to update so I can't verify this.

    Can someone offer any assistance with this?

    Thank you

    This occurs due to the creation of subsets of fonts. Not all letters are available because they may be in subsets of different fonts. Delete the fonts embedded in the pdf file, then re - incorporate fonts.

  • Question about upgrading HDD on Satellite Pro U200-128

    Hello

    I want to spend my laptop U200-128 HARD drive. What is the maximum size of HARD drive that can be used? Is it possible to use the 250 GB HARD drive? My current BIOS version is 3.7

    Thank you

    Hello

    It will be very nice if you can confirm that the upgrade of the HARD drive has been successfully. All info on the hardware upgrade can be useful for other people who visit this forum.

  • Satellite A300: missing letters when typing fast & noisy fan

    Hello

    I hope someone can help me.

    I've had this laptop for almost a year and slowly this is driving me crazy. I type very slowly and deliberately when you use IE.

    For some reason it doesn't pick up evey key STROKE. It is very well when using office however applications. It seems to be possibly related to the fan constantly on.

    Online games run slowly also.

    I bought an air duster can but not much came out of the box fan, so the solution suggests everyone is custody here for fan questions has not helped, the fan is still noisy and it took me ages to this type.

    Please help me!

    Andrea

    What plugins are you using IE? Some plugins/toolbars can drastically affect performance.

    Have you tested in FireFox or another browser? You can download FireFox here: http://www.getfirefox.com

    Have you installed Windows yourself? Or are you using the factory Windows installation?

    Maybe you are missing some drivers, for example, if you have not installed the correct graphics drivers, Windows will run in Mode VGA (software mode), which is very slow.
    Take a look in the device for driver issues Manager.

    It can also be caused by software installed. Perhaps you have two antivirus installed? Maybe you should try to back up your data and running recovery. Who would determine if it is a hardware or software problem.

    An update of the BIOS can also help. You can get the latest version of the BIOS on the Toshiba site in the support section.

  • Satellite Pro U200-128 - how to install 1 GB of RAM?

    I can't yet get your hands on the user maual on this Web site, or do I have to say more. I got my 1 GB of ram, this morning, the last thing to do is to install!
    Please kind people you give me instructions on how to do it?

    Thanks in advance.

    Hello

    First the manual can be downloaded here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download user manual

    Memory locations are under the keyboard. This means that you need to remove the keyboard for installation and the exchange of one or two modules of RAM.

    I would recommend downloading the user manual as it contains an exact description how do.

    Good luck! :)

  • Satellite Pro U200 - hard drive upgrade

    Hello

    I have a Satellite Pro U200-128 and you want to upgrade the hard drive. I can't find detailed specifications to show me the compatibility, drive type and therefore the size of a disc that I can buy.
    I think that its SATA, but there is a lot of info on SATAII, not sure if it will work in my model?

    Any help appreciated

    Hi ollieg72,

    You re right. Satellite Pro U200 already uses the HARD drive with SATA interface if you need a HARD SATA 2.5. In addition, it should be possible to use every ability because on SATA interface, there is no capacity limit.

    Anyway, SATAII HDD is also working because they are compatible to the old interface of SATA1 downgrade. So it makes no difference if the HDD is SATAII interface or not. ;)

  • Updated BIOS for Satellite Pro U200?

    Hello

    does anyone have any experience with BIOS version 1.3 for Satellite Pro U200? I've upgraded to this version of the BIOS and have had several problems since then - shortened wireless keyboard does not and display the overflowing of installation brightness to name two.

    In addition, as I noticed last week, upgrading the BIOS can not be downloaded more and there is no alternative - just says download page don't: "no BIOS upgrade for this product! Is there anyone that has 1.2 BIOS so that I can try to downgrade to this version?

    What is your experience with BIOS 1.3?

    Hello

    It s really strange?  :|
    I checked the BIOS for Satellite U200 and Satellite Pro U200 download section, but I put t found any BIOS download at this time.

    A few years ago the authorized service provider has installed an older version of the BIOS on my Tecra friends unit.
    I guess that he should be able to do it on your Satellite Pro U200.
    The other possibility is to wait for a newer version of the BIOS.

  • Get the error message when you try an upgrade to Vista on Satellite Pro U200

    Hello
    When I upgraded my Satellite Pro U200 to Vista (original CD using Toshiba), I couldn't install Config Free program. When I want to install it, I get the message 'the installation image is not corrcet' ideas for this problem?

    Thank you

    Hello

    Maybe you need to download again the configfree for your machine from here:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Just download and try to install it. I can't imagine that she won´t, I ve updated work my A100 some time ago and everything works fine.
    BTW. I downloaded all the stuff from the link above.

    Please give some feedback

    Greetings

  • USB mouse will not be in service to initialize the top when used through Dynadock on Satellite Pro U200

    The USB mouse not is won't boot on initialize top when used through Dynadock on Satellite Pro U200. If the mouse is reinstalled on the Dynadock it works fine. I use a Kensington Valuoptical USB mouse. I tried the alternative kensington mouse and had the same problem. Can someone tell how to fix this?

    Hi Jeremy

    Unfortunately I don't have a solution to your problem, but it can also be a technical limitation. I'm also interesting to buy this docking station and I would like to know if there is the same problem with memory external HDD or USB sticks.

  • Need the manual online for Satellite Pro U200

    I heard people talking about the online manual for the Toshiba Satellite Pro U200, especially when it comes to upgrading the memory. But I never saw a link to the manual online. Someone can it give?

    Neffe :)

    Hello

    Visit http://eu.computers.toshiba-europe.com > download & support > Support home page.
    Under download, you will find Toshiba manual. Click on it and choose your model of laptop.

    I check the manual and it is ready for download. ;)
    If you need more help please write again.

  • Satellite Pro U200 - how to access the BIOS?

    Hello

    HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

    Hello

    I checked the forum and you should try to press the ESC key.

    It work? ;)

    Welcome them

  • I need the last CD of Microsoft Office - Satellite Pro U200-125

    I just bought Satellite Pro U200-125 without the last set of Microsoft Office CD. Does anyone have this CD?

    Thank you

    Musallam

    Hi Musallam

    Sorry, but what you mean with last Microsoft office defined? Office 2007 perhaps?

  • Missing letters when you type on Satellite M105

    I use a Satellite M105-S3084 (Windows XP MCE) and fighting in vain with a keyboard problem since I bought it first. I tend to type fast, especially the double letters and find that very often a single of double letters appears on the screen. For example, 'kk' translate to 'k' only and the similar missing letters even if not doubled. This causes a lot of waste of time correcting what I type.

    I know that there are parameters under control Panel\Keyboard ("repeat delay" and "repeat rate") which allow the adjustment of speeds, but I found the frustrating to use. I tried both with different settings and still have a problem with the missing letters. Maybe I don't know how to define that, and I just get frustrated, or there is another bet in another place which I do not know.

    Others have had this problem with the mising letters while typing and found a solution?

    Thank you.

    Hello, Jeff

    If I'm remembering right, there was a similar problem with the Satellite L10 and L20, I don't remember. This problem has been fixed with the new version of the BIOS. US models of laptops are not known to me, but if you have time you can check IRIS ask on the page we Toshiba. You will find many interesting documents.

    Check it out under the http://askiris.toshiba.com/ToshibaSupportSite/supportcentral/supportcentral.do?id=m1

    Maybe you will be lucky and find something on your problem with the keyboard.

  • Satellite Pro U200 - does support the DVD double layer?

    Hello

    Does anyone know if engraver of DVD of Satellite Pro U200-PLUA1E-02802QS4 supports the dual layer option?

    Kind regards
    CCBC

    Hello

    It s dependent not portable, it s according to the reader that supports double layer DVD or not! ;)

    To check the properties of your drive, for example with Nero. There you can see what are the types of discs, you can use in this drive.

Maybe you are looking for