Satellite Pro U200 and APPCRASH question (Disc Creator)

Similar Questions

• Satellite Pro P300: Error TOSHIBA recovery disc creator

  Hello

  Having just received my P300, I tried to create a backup using the TOSHIBA recovery disk creator.
  After having inserted a 4.7 GB disc in the DVD drive and backup, while she was refused, a message pops up saying:

  "Cannot read the following file:

  F:\blahblahblah
  Error code: bonnefin
  Failed to create the Recovery DVD 1 "

  It is clear to me that there was not enough memory on the disk it ends. The size of the disk had also declined about 0.5 GB.

  My main question is:
  Do you need to use a DVD-R disc or a DVD + R disc? In addition, is a panasonic disc disc the best type to use?

  Help, please.
  Thanks, JoeC.

  I agree with Akuma.

  The problem of compatibility between the DVD and the CD/DVD burner can cause this error.
  One of my friends had a similar problem. He tested two different brands of DVD and both were not fully compatible

  After the use of the TDK DVD-R, it could burn the image and could create the recovery DVDs.

  Therefore, it would be desirable to test various media in order to solve this problem.

  Goodbye & good luck

• Satellite Pro U200 - sound to the headset only

  I have a Satellite Pro U200 and I install a Vista. I installed the audio driver, but there is no sound on the speaker just with headphones.

  Maybe the little switch that is placed in the headphone jack doesn't work properly.
  This option controls the output between the headphones and speakers.
  Try to plug and unplug the headset several times. Maybe it works then.

• Satellite Pro U200 - installing the audio driver on Win XP

  I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

  Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

  Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

  -so finally you need to install the two patches
  -Download Realtek audio driver from the Realtek page
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• Flash (TCrdMain.exe) error on Satellite Pro U200 card

  Hello

  I have Vista Business installed on Toshiba Satellite Pro U200
  and, in the event log, the following error message:

  Log name: Application
  Source: Application error
  Date: 20.11.2008 18:06:38
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  Application TCrdMain.exe, version 1.0.0.9, time stamp 0x458faba6, failed mscorwks.dll module, version 2.0.50727.1434, time stamp 0x4757b767, exception code 0xc0000409, offset error 0x002b832f, 0xe38, failing application start 0x01c94b322888a3c2 process id.
  The event XML:
  
  
  
  1000
  2
  100
  0 x 80000000000000
  
  11115
  Application
  Toshiba
  
  
  
  TCrdMain.exe
  1.0.0.9
  458faba6
  mscorwks.dll
  2.0.50727.1434
  4757b 767
  c0000409
  002b832f
  E38
  01c94b322888a3c2
  
  

  someone knows howto fix it or where can I download this software of Flash cards and reinstall?

  ist it this software?

  Flash Media Driver

  http://de.computers.Toshiba-Europe.com/innovation/vista_drivers.jsp?macId=&mode=userMachines&userOS= & action = search & selProduct = 656 & selOS = 26 & selType = 244 & country = 37 & language = 13 & search =

• Upgrade SSD on Satellite Pro U200

  Hello!

  I have a laptop (Satellite Pro U200-PLUA1E-00X007HU of the v3.70 win7 32-bit bios), I want to upgrade with a series of Samsung 830 64 GB SSD. I read that the SSD need AHCI mode. My laptop supports AHCI mode? What can I change in the bios before installing the new storage?

  Thanks for the help!

  Robert

  Hello

  I see you're confused
  First, he must know that the laptop supports the SATA controller.
  This means that you must use hard drives SATA or SATA SSD.

  Second: AHCI means SATA some BIOS supports only a SATA mode, and you can switch between compatible (IDE) mode and AHCI (SATA) mode.

  If this switch is not available in the BIOS mode is always set to AHCI.

  However, to SSD drive question:
  I put t really no problem using an SSD.
  It must function as the SATA controller support

• Satellite Pro U200 - Viewer is preinstalled on Vista?

  Hello

  What Image Viewer will be preinstalled on Vista professional in Satellite Pro U200-PLUA1E-02802QS4?

  Hello

  I m not Satellite Pro U200 owner but I suppose that the normal image viewer for Windows is installed.

  But I put t understand the reason for your question. You can install and uninstall what you want then doesn t be worry about it! ;)

• Satellite Pro U200 crashes, freezes in a strange way

  Hello

  I have laptop Satellite Pro U200, once by accident, it fell out of my backpack.
  Then after, I pressed on IT Windows key is not started, even though I could hear the hard drive makes a noise.
  I got my computer to Toshiba repair service.

  It was very funny so I explained the problem to repair the assistant and after he pressed windows button started working as nothing really happened.
  After some time I noticed that sometimes Windows everything freezes, as stop and that's all I can not move my mouse, keyboard does not (Ctrl + Alt + Delete included) all that I can do is hold OFF the button for everything and restart Windows...

  Now he has started to crash (gel) in particular much more often.

  I thought that if these two things are linked?
  Maybe someone of you have faced such a problem before and know how to solve?

  I think buying new hard drive, but I don't know if that would solve the problem, what do you think?
  If all I have to do is buy a new hard drive maybe someone of you knows some net store where I can find it?

  Thanks a lot for you help,

  Hello

  As I understand it, your laptop start freezing and crashing after several minutes of use.
  Is this good?

  Well, if yes then I have more questions;
  Have you noticed a high temperature?
  If Yes, then this problem could be related to a high temperature and windows would freeze due to overheating.
  In this case I recommend that you clean the fans using a jet of compressed air.

  It would also be possible that your RAM module is also affected

  My laptop froze because of the modules was defective.
  I tested the laptop with other modules and could solve the problem

  Maybe my tips and tricks could be useful for you to solve the problem with the laptop.

• Satellite Pro U200 - Docking Station

  You can buy a docking station for the Satellite Pro U200?

  In the affirmative, please can you pass on a link? or the numbers of models etc.

  Thanks in advance for your help.

  Adam

  Hi Adam

  I answered your first question on the Portege docking station.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17291

  You will find the link to the site Options and accessories.
  This Toshiba site, you will be able to find the compatible devices and supported.

  If your computer supports a slot down for a connection to the Port Replicator port so you can use the docking station or port replicator port as an additional device.

• Satellite Pro U200 - recover all of the WinRE partition system

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS4 with Vista Business.
  HOWTO recover the entire system of the WinRE partition?

  It is really strange that you do not understand how it works with recovery and what is this partition WinRE (Windows Recovery Environment).

  One more time:
  Partition WinRE has nothing to do with installation of recovery and laptop factory settings.
  If you want to have BONES like the first day, you must install OS again. You can do this if you install recovery image designed Toshiba. I don't know if this image you got saved on DVD (disc facilities) or saved as image of HARD drive recovery.
  If you can tell me exactly what you have, I can explain how it works.

  WinRE partition is characteristic of Vista and Toshiba has nothing to do with it. So, if you want to know more about it using Google and Wikipedia. Maybe some Microsoft forum can help you about this.

  http://en.Wikipedia.org/wiki/Windows_Recovery_Environment

• Satellite Pro U200 - hard drive upgrade

  Hello

  I have a Satellite Pro U200-128 and you want to upgrade the hard drive. I can't find detailed specifications to show me the compatibility, drive type and therefore the size of a disc that I can buy.
  I think that its SATA, but there is a lot of info on SATAII, not sure if it will work in my model?

  Any help appreciated

  Hi ollieg72,

  You re right. Satellite Pro U200 already uses the HARD drive with SATA interface if you need a HARD SATA 2.5. In addition, it should be possible to use every ability because on SATA interface, there is no capacity limit.

  Anyway, SATAII HDD is also working because they are compatible to the old interface of SATA1 downgrade. So it makes no difference if the HDD is SATAII interface or not. ;)

• Set password Linux ATA hard drive / Toshiba Satellite Pro U200

  Sorry for the long post, but I want to be as specific as possible:

  1)
  I use a Toshiba Satellite Pro U200 under Linux (OpenSUSE) for some years now. Works fine without problems so far, even the fingerprint reader works. I deleted and never used the Windows XP preinstalled.

  For security reasons, I have now decided to put a HDD ATA password, in case the laptop is lost or stolen (changed drive for a disk Seagate Momentus 7200 FDE.2 SATA II with full encryption of the disk material).

  In order to get the protection offered by the full disk encryption, I need to set a password for the ATA. During startup, the Bios must request the password and unlock the drive only when the password is correct.

  2)
  My problem is: in the Toshiba laptop it is impossible to set the hard drive ATA password directly in the bios (as is possible in HP laptops, for example). Toshiba there is only one way to set the password to disk, which is a software utility for Windows XP (named 'Assist'). But I don't want to change the operating system only to set this password.

  3)
  Therefore, I tried the linux instructions

  hdparm - user-master m - security-all-pass SecretMasterPassword/dev/sda
  hdparm - user-master u - security-all-pass SecretUserPassword/dev/sda

  which are used for adjustment ATA passwords. Indeed, at first, it seems to work very well. The password is set and the drive is locked.

  4)
  When I restart the laptop, the Bios the HDD password request, as it should do.

  But he does not accept the SecretUserPassword prior to seizure. The answer is "wrong password", or similar.

  5)
  Analysis:

  I have no doubt that the password has been set correctly: I checked by restarting the laptop through rescue DVD in linux and unlock the disc via

  hdparm - user-master u - safety - unlock SecretUserPassword/dev/sda

  in order to use it. No problem, it works as supposed to. After the release, the disc is usable as usual. And I can also disable the password via

  hdparm - user-master u - security - disable SecretUserPassword/dev/sda

  After you disable the password, the laptop starts normally again, but I have no password.

  When I re-enable the password bios Toshiba again asks the password during initialization, but does not accept the (correct) password on entry.

  6)
  Does anyone have an explanation for this behavior?

  Bios Toshiba has somehow changes the password entered by the user, before being sent to the disk? I think that this would be inconsistent with the ATA standard.

  Anyone managed to set/change the password to ATA in a way that the disc can be unlocked via the internal order of the Bios, without installation of Windows XP and the Toshiba Software 'Assist '?

  Thanks for reading this long post so far. Any response is welcome.

  hmetz

  Hello

  As you probably know Linux is not supported by Toshiba and if you n t get some good advice here I recommend you to visit a few Linux forums and try to discuss with experts in Linux it.

• No sound after installing Windows 7 on Satellite Pro U200

  Hello

  I just installed Windows 7 Professional on my Satellite Pro U200 10 p.

  Available for XP Pro.

  Sound has stopped working since the new facility (which fromatting the drive - no partition) and can not find a solution. The v6.10.1.6000 of SoundMAX Integrated Digittal HD Audio Driver is installed. I uninstalled and reinstalled several times, but this doesn't seem to be the right driver. I can't find info to tell me what the correct driver can be either. The Toshiba site is a little sparse on Windows 7 drivers for this model and gives no indication that the driver may be is.

  Windows 7 does not think that there is a problem and some reports that "this device works properly." in speaker properties > Configuration information dialog box. However not coming out, the speakers or the 3.5 mm jack

  Anyone got any ideas?

  Thank you

  James

  Hello

  Go to Device Manager and check what sound chip you have exactly:

  Use this statement:
  [How to identify an unknown device? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Then you should be able to find a good pilot.
  I also recommend remove/delete the sound card in Device Manager.
  Just select the audio remove card and press on, and then restart the laptop

  PS: Are you sure that the sound is not muted? Please check this too!

• Satellite Pro U200 - how to access the BIOS?

  Hello

  HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

  Hello

  I checked the forum and you should try to press the ESC key.

  It work? ;)

  Welcome them

• Satellite Pro U200 - projector as external monitor

  I try to connect a projector as external monitor. I use a HDMI adapter, VGA, because the entry in the projector.

  If I use an old laptop, it works OK.
  If I use my Satellite Pro U200, Modelo PLUA1E-02301RSP, the display shows only the initial screen,

  I mean the landscape with the TOSHIBA logo, but it doesn't change.
  If, for example, I look at some photos as I have both monitors running, the portable computer I see the photo, but the projector doesn't change, it shows only the landscape and logo.

  What can I do?

  Thank you and best regards,

  Vicente

  I put t know if I understand you right but perhaps extended desktop enabled. You must disable this option in screen resolution settings.

  Can move you the open Office Windows laptops to the pic you is on the projector?