Satellite Pro U200: How to activate the license of OneNote
My U200 came with pre-installed OneNote, but it keeps asking for a license number. It's something and it is installed but you need to go and buy a copy, or if there was a license with the PC?
Please check out what two other threads on the same topic:
You can find the registration key at the bottom of the recovery of Toshiba CD cover
How to activate the bluetooth connection?
First check to see if your computer supports BT
If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
If there is no label then your machine was not equipped with internal BT module!
If the laptop supports BT, then use the FN + F8 key to go to the BT
Then BT should start installation and configuration.
For more details, see this forum and this Toshiba BT Portal:
Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:
1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?
Thanks in advance
These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.
Here you can download:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
Good luck! :)
HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?
I checked the forum and you should try to press the ESC key.
It work? ;)
I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.
The laptop is running Windows 7 64 bit
What card WLAN have you had before and do the work of a former?
I think that it of difficult to say why it doesn t work but maybe this card is not compatible.
By the way: do other FN keys FN + F8 work or simply not?
I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with
+ , but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.
Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?
Thanks 4 your help.
Hmm, in some cases the BIOS contains an HDMI output option.
In your case, I recommend to check this.
I have not very well if this available but it s m of a value in a control.
But usually the Fn + F5 should work as described in the user manual... did you check that?
How can I turn on the audio / sounds on my keyboard so that it creates a beep or similar, whenever I have to press a button - I need this because I keep missing keys and make a lot of typos.
I tried all obvious and don't see any mention of how to do this anywhere?
I can just confirm that there is no standard option WXP and for that and you need some additional software.
Expensive chain, you are great. I really wonder how you find it. ;)
A BIG Thank YOU for your great job offers!
Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
in this case it would be interesting what Type of laptop it is exactly.
You will find this model on the bottom of your laptop. There is a review of it.
Some models have a Bios update available, others not, for example.
Please send additional information!
I have PLUA1E Satellite Pro U200 - 02802QS4 with Vista Business.
HOWTO recover the entire system of the WinRE partition?
It is really strange that you do not understand how it works with recovery and what is this partition WinRE (Windows Recovery Environment).
One more time:
Partition WinRE has nothing to do with installation of recovery and laptop factory settings.
If you want to have BONES like the first day, you must install OS again. You can do this if you install recovery image designed Toshiba. I don't know if this image you got saved on DVD (disc facilities) or saved as image of HARD drive recovery.
If you can tell me exactly what you have, I can explain how it works.
WinRE partition is characteristic of Vista and Toshiba has nothing to do with it. So, if you want to know more about it using Google and Wikipedia. Maybe some Microsoft forum can help you about this.
Can you help me?
My English is bad I do not end.
The question is:
My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.
I want to know what's wrong
Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
Her check first because otherwise, you can get the WLAN to work.
In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
After this Free Config should find your WLAN router if you are in the range of that.
Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.
But now, he's just on stand by.
How can I get this back to how it was (having to press the button to exit stnd - in)-help!
I tried to turn off Toshiba power saver and using the windows settings but nothing
I have treid working :(
Can anyone help?
I get at the end of my home with this computer laptop blinkin :(
How to activate the functionality of scrolling on the touchpad of my laptop Satellite M35X-S163?
The touchpad scrolling feature can be enabled in Control Panel > mouse.
You'll find the option but don t forget that the driver for the touchpad should be installed and you can find it on the Toshiba site:
I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.
Any suggestion? Thank you!
I think that in this case, you can use a network switch.
Is it possible to activate the license eDel (.lic file) using only a CLI with SSH (without ASDM) on ASA5512-X connection?
How long the computer laptop Saturday Pro U200-10 b should there be for the first time?
That s easy. You must charge the battery for laptops up to the battery LED switches to green light or blue. I put t know exactly the LED on the U200 Pro colors.
A hint; all the details should be in the manual of the user who is always pre-installed on Toshiba laptops
There, you will find also information about the battery and manipulation.
Maybe you are looking for
LV10.0 / WXP A VI is called dynamically by Method VI Run (wait until done = FALSE, Auto have Ref = TRUE). Queues are used to Exchange data with the main VI. Closing (the main VI "stop" message), the LabVIEW VI hangs for about 25 seconds (!) with one
Hope someone can help with this, I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black scree
I improved my new Pavilion TS 15 Windows 8 to 8.1 and noticed that the computer doesn't Cup not completely using charms bar, close button. The screen turns off but the Start button / stop and the wireless key remains illuminated. Both turn off if I h
Windows logo appears then white screen. Had to remove the battery to stop. Any suggestions as to why Windows does not load?
Hello I want to use a MATLAB code in Labview, but without the help of MATLAB. The code is the following: Mask = ones (size (cc));Mask (1:sze, = 0;)Mask(:,1:Sze) = 0;Mask (end - sze, + 1:end, = 0;)Mask(:,end-Sze+1:end) = 0; It must be a picture 2D wit